HOLA CUALES SON LOS CABLES QUEVAN ALAS VOCINAS CONECTE PRENDE EL RADIO CON LA LLAVE Y APAGA BIEN PERO NO SE SI LOS ALAMBRES DE LAS BOCINAS ESTAN EN EL CONECTOR GRIS..
Everything still worked when I had it bro, and not I don't think the size of the double din matters, but I wouldn't recomend getting those eBay android double din they're just to big for the kit I'd stick to a pioneer or if you want something for less money maybe a boss those radios will fit the kit perfect bro
No I bought the whole kit on eBay for a bill. Comes with harness and the frame for the radio and also the instructions, but you do need to tap a few wires to get the subwoofer working and also to tap the wire from the amp to the blue wire that's from your radio to turn on the amp
Wich harness did you buy on eBay I bought one and didn't work for my 05 tl, the radio did turn on but no sound at all, I been asking every store and they keep telling me that there's no harness for this car.
i have the same problem with my 05 TL. It turns on but no sound.. and i went to a shop where they install radios and they told me the same thing that there is no harness for this car... Have you found a solution??
Might want to check your ground, but also sometimes it can be the radio man, if you get something more pricey like a pioneer you won't have as much background noise, I recently installed a radio on a Honda Accord it was a cheap one it sounded horrible then I replaced it with a kenwood the background noise went away, you might want to look at a better radio and I would just sell the dual.
Just tap to your rear speakers you can remove the radio and install the loc behind the radio or u can just tap to the speakers in the trunk Left Rear Speaker Positive Wire (+): White Left Rear Speaker Negative Wire (-): Yellow Right Rear Speaker Positive Wire (+): Orange Right Rear Speaker Negative Wire (-): Red
You actually need a resistor, the kit that I bought they don't have it on eBay anymore it went for 99. There some other kits but don't carry the resistor anymore
how do u hook up those rca cables running to the red/blue (factory sub) and the white/green (constant power) wires ?? and once you hook them up will your aftermarket sub cut on because my subs aren't cutting on in my trunk that i just tried hooking up and i think those rcas have a lot to do with that
i just need to know how to get my subwoofers in my trunk to play because my amp light is turning on but im gett no sound from my subs so i thought it was my RCAs buy apperently its something different I dont know about, i need some help bro
You should check your rca wire from amp to radio make sure their plugged in, check speaker wire going to amp, make sure you have a clean ground with no paint. I had subs in my tl and never had a problem bro
Hey bro, I’m trying to swap out my radio in my 2006 tl too. I’m not getting the wiring that you made from C connector. I don’t understand how you tapped into the wires. It’s like the radio come up but I’m not getting anything from the speakers
It was double din kit for Acura TL 2004-2008, and it went for 99 dollars, but tried looking for it and all of the kits I found don’t carry the resistor anymore bro.
Hey bro, the resister you speak about is because of the navi right? Do they sell those resisters? or can I just make one? Cause it looks like yours is just 2 wires taped together... Thanks for the reply
MrThree1zero correct, it is a resistor but not sure how many ohms it is. There is a video on your tube you can look up and it tells you what kind of resistor this person used to make the navi work
No if you done a radio install before it's really simple man, don't be afraid just a little different but if you get the kit from eBay it tells you how to do it step by step, and also here's a link to the radio removal this helped me a lot: m.ruclips.net/video/BuNtLjUmTBs/видео.html
Hey, how were you able to connect the speaker wires? Because i try to connect a Pioneer AVIC 8200NEX in my 2005 Acura TL and it turn on but there was no sound.. Do you know what i need to do to make the speakers work? If i buy the same Dash Kit from eBay as you will I have sound?
Everything worked if you get the same kit you'll get everything with the instructions, this doesn't really mess with the navigation man. If you install it the right way everything works how it's suppose to.
Yeah the navi was working when I installed the radio. It stopped working but it's because the cd has a lot of scratches so instead of spending on a new cd I ended it up putting a better radio it now has a piooner avh-x4800bs 7" screen double din.
Lol are you talking about the radio on the Altima? If so it supposed to be a 68ohm 1/4 watt 5% resistor. But if the one you got worked that's great man. Am glad the video helped you!
Hey, when you did this install, did you lose any controls on the stock nav deck? I just did mine but still wanted the back up camera to work but now I cant use the nav touch controls to enter the pin when you disconnect the battery
Im having the samr issue. The touch screen stopped working . I hooked the factory radio back up and put the code in and switched it back i have the back up camera working but no navigation. Let me know if you found a fix. Thanks
I have a double din, aftermarket amp and subs. when I try playing music only my aftermarket sub works, no door speakers, how do do the wiring from the factory amp to get the door speakers to work??
If you get the kit from eBay, it will come with the instructions, and comes with this one wire that makes the navi work. The kit is about 100 bucks but worth it
The av cables quick question i npw there a ground in each cable an positive did u had to separate them on both or did u just strip it an connect the cables ? I need help on the part any one or can i c the diagram
yungmexican32 i will really appreciated if u can help me out with that bro foreals am stuck on that bc i spilt does wires an theres 1 more wire in the wire that i had to spilt an from what ive see utube one is pos an other negative but am lost on that part lol
L G lol gotcha did you get the kit? I actually just got another tl and replaced the radio haven't posted the video tho but I got the instructions somewhere lol
First you need to remove the radio bro, then once you remove it there will be some brackets holding both radio and Navi, there will be a few bolts, remove those and you will separate radio from Navi, if you get a kit on eBay it will come with new brackets to hold you’re after market radio in place below the Navi, it’s simple but it does take work.
It was the 180bt I don't remember but that kit fits pretty much all double dins. It now has a different radio the avh-x4800bs 7" double din. And looks really now it also has a rear view cam and the steering wheel controls also working nice set up.
I don't I got it with the kit through eBay. I was talking to someone that commented on here and he said he used an 80ohm resistor wouldn't be sure you'd have to try it out man. Just go to radio shack or amazon and get 80ohm resistors their super cheap and you can try it out.
The kit on eBay should come with the instructions, you should send a message to the seller. But in my video I show how you tap the wires shouldn't be complicated
ay man i have a single din radio pioneer and my front speakers work but my rear speaker are not doing any sound and i already checked the wiring in my radio to the car and everything is right and im not sure that is because i dont have the factory amp i took it out and just added and amp and 2 12"s in the back
yungmexican32 i just hook up the wiresond the stereo for the front and back speakers but the back speakers has no sound i dont have the factory amp i just have an amp on the back with 2 12s
There is a factory amp on the tl so make sure u have the right harness bro with rca instead of just the simple one that only has wires. And you plug you're rca to the back of the radio for the front and rear like u have a 4 channel amp.
Hey what's up bro, everything comes with the kit that I bought. But I was looking for the kit on eBay couldn't find it anymore, there are some other kits but don't have the resistor anymore.
HOLA CUALES SON LOS CABLES QUEVAN ALAS VOCINAS CONECTE PRENDE EL RADIO CON LA LLAVE Y APAGA BIEN PERO NO SE SI LOS ALAMBRES DE LAS BOCINAS ESTAN EN EL CONECTOR GRIS..
Yo, you said the ebay dash kit would include wiring instructions but it didn't.
David they stopped selling the kit with the instructions on eBay a long time ago bro you gotta click the link I posted below the vid!
How much you paid which it called
Sam O for the kit or radio? Or the whole set up
does the double din requires a certain size aftermarket screen to fit ?
Everything still worked when I had it bro, and not I don't think the size of the double din matters, but I wouldn't recomend getting those eBay android double din they're just to big for the kit I'd stick to a pioneer or if you want something for less money maybe a boss those radios will fit the kit perfect bro
just to be sure, removing the stock tape deck doesn't lock the navi out or not let the car start? worried about the anti theft before i do this
Cyle Lance no it doesnt
how did you hook up the power to the pioneer radio? did you use the harness that came with the radio?
Yes I did the harness that comes with the after market radio, and the ones that will comes with the kit.
Did you have to changed the wire to the speakers? And did the center channel and subwoofer stopped working?
No I bought the whole kit on eBay for a bill. Comes with harness and the frame for the radio and also the instructions, but you do need to tap a few wires to get the subwoofer working and also to tap the wire from the amp to the blue wire that's from your radio to turn on the amp
Wich harness did you buy on eBay I bought one and didn't work for my 05 tl, the radio did turn on but no sound at all, I been asking every store and they keep telling me that there's no harness for this car.
i have the same problem with my 05 TL. It turns on but no sound.. and i went to a shop where they install radios and they told me the same thing that there is no harness for this car... Have you found a solution??
Jonathan Sanchez did u fix it I have the same problem
When you put the dual double
Din was the audio clear or no? I have it but it didn't sound good
Yes it sounded nice man did you get the same as this one
yungmexican32 I got the dual double din, but there is static in the back ground and it's annoying, could it just be the dual? Or....
Might want to check your ground, but also sometimes it can be the radio man, if you get something more pricey like a pioneer you won't have as much background noise, I recently installed a radio on a Honda Accord it was a cheap one it sounded horrible then I replaced it with a kenwood the background noise went away, you might want to look at a better radio and I would just sell the dual.
I am trying to install a line out converter. should I wire it up before or after the amp
Are you hooking up subs to the stock radio?
yungmexican32 yeah
Just tap to your rear speakers you can remove the radio and install the loc behind the radio or u can just tap to the speakers in the trunk
Left Rear Speaker Positive Wire (+): White
Left Rear Speaker Negative Wire (-): Yellow
Right Rear Speaker Positive Wire (+): Orange
Right Rear Speaker Negative Wire (-): Red
yungmexican32 thanks man
How u get the Navi to work? What wire is it?
You actually need a resistor, the kit that I bought they don't have it on eBay anymore it went for 99. There some other kits but don't carry the resistor anymore
Hey... maybe its just me but why would anybody swap out a pioneer for a dual radio... its a downgrade in my opinion
Sold the car man
did you retain steering wheel control
Todd Trudell yes i did
Todd Trudell check my other video out
how do u hook up those rca cables running to the red/blue (factory sub) and the white/green (constant power) wires ?? and once you hook them up will your aftermarket sub cut on because my subs aren't cutting on in my trunk that i just tried hooking up and i think those rcas have a lot to do with that
Do you have aftermarket subwoofers?
yes i do
i just need to know how to get my subwoofers in my trunk to play because my amp light is turning on but im gett no sound from my subs so i thought it was my RCAs buy apperently its something different I dont know about, i need some help bro
You should check your rca wire from amp to radio make sure their plugged in, check speaker wire going to amp, make sure you have a clean ground with no paint. I had subs in my tl and never had a problem bro
were did u run your remote wire?? because i checked everything u said
also did you ever try a loc pro 7 line output converter
Todd Trudell no never did
Hey bro, I’m trying to swap out my radio in my 2006 tl too. I’m not getting the wiring that you made from C connector. I don’t understand how you tapped into the wires. It’s like the radio come up but I’m not getting anything from the speakers
rasheed mitchell go through my channel and I have a newer video it shows how to tap into all wires
Can you please share the link for the kit ? Thank you in advance.
m.ebay.com/itm/Acura-TL-Double-DIN-Radio-Installation-Kit-fits-2004-2005-2006-2007-2008-/112118104116?hash=item1a1ac28034%3Ag%3AFKMAAOSw8oFXyNqS&_trkparms=pageci%253A0674b59c-b921-11e6-8bd6-005056b68961%257Cparentrq%253Ac35a2ff11580a357d64ed5a8ffe303ef%257Ciid%253A1
How do your Gps work wit that radio
With the kit I bought came a resistor for Navi to work with the aftermarket radio, but I can’t find the kit anymore it’s not on eBay anymore.
You know what the name
It was double din kit for Acura TL 2004-2008, and it went for 99 dollars, but tried looking for it and all of the kits I found don’t carry the resistor anymore bro.
Do you have to by pass the code
No you don't have to bypass the code.
Hey bro, the resister you speak about is because of the navi right?
Do they sell those resisters?
or can I just make one?
Cause it looks like yours is just 2 wires taped together... Thanks for the reply
MrThree1zero correct, it is a resistor but not sure how many ohms it is. There is a video on your tube you can look up and it tells you what kind of resistor this person used to make the navi work
want to upgrade my factory radio
is there anything I should be leary of?
No if you done a radio install before it's really simple man, don't be afraid just a little different but if you get the kit from eBay it tells you how to do it step by step, and also here's a link to the radio removal this helped me a lot: m.ruclips.net/video/BuNtLjUmTBs/видео.html
Hey, how were you able to connect the speaker wires? Because i try to connect a Pioneer AVIC 8200NEX in my 2005 Acura TL and it turn on but there was no sound.. Do you know what i need to do to make the speakers work? If i buy the same Dash Kit from eBay as you will I have sound?
Yeah bro just get the kit, because this wire harness comes with rca instead of just the normal speaker wires.
yungmexican32 Thanks a lot bro.
which wires you used for the sub woofer
On the yellow and red soes you connect to the remote wire
Did the navi still work ?
Yes still did at first but then the disc got messed up, but the after market radio did not hurt anything.
How did u get your center speaker to work and did u still have navi prompts
Everything worked if you get the same kit you'll get everything with the instructions, this doesn't really mess with the navigation man. If you install it the right way everything works how it's suppose to.
hey I wanted to know if the nav screen still works?
Yeah the navi was working when I installed the radio. It stopped working but it's because the cd has a lot of scratches so instead of spending on a new cd I ended it up putting a better radio it now has a piooner avh-x4800bs 7" screen double din.
Brother was watching the video that you uploaded I have an Acura TL 06 I put a DVD but the Navigation is not working that I should put it
Where did you get the resistor, how many ohms is it and do you only have to wire one side of the resistor
It comes with the kit bro, check it out on eBay.
Lol are you talking about the radio on the Altima? If so it supposed to be a 68ohm 1/4 watt 5% resistor. But if the one you got worked that's great man. Am glad the video helped you!
yungmexican32 how about the resistor that you showed in the video what size?
1amb340 bro what size resistor ?
Hey, when you did this install, did you lose any controls on the stock nav deck? I just did mine but still wanted the back up camera to work but now I cant use the nav touch controls to enter the pin when you disconnect the battery
Did you mess up your screen? Because mine worked fine after doing this
Im having the samr issue. The touch screen stopped working . I hooked the factory radio back up and put the code in and switched it back i have the back up camera working but no navigation. Let me know if you found a fix. Thanks
so my own came with a different harness and am getting no sound, do you know any other way I a get sound?
Did you get the harness with the rca inputs? Or is it the normal wiring harness with just the wires?
how did u get sound to your speakers i installed an indash in my car but i don't get any sound to my speakers
Did you get the correct harness?
I have the same issue right now. Did you ever figure it out. I have a harness that says itll keep my subwoofer and amp, but I get no sound. Thanks.
Did you tap the blue/white wire to yellow/red. For the amp to turn on?
yungmexican32 yeah I eventually did but I got a lot of distortion. I ended up just bypassing the factory amp. sounds way better now.
I have a double din, aftermarket amp and subs. when I try playing music only my aftermarket sub works, no door speakers, how do do the wiring from the factory amp to get the door speakers to work??
Do you buypass The map ?
Juan Jiménez you can tap an 80 ohm resistor for it to work
you my navigation is not work when instalen radio
does the navigation still work with it
hey.. by any chance you still got the wiring layout for the amp?
Don’t got it anymore bro sorry...
yungmexican32 bro i have a question test me at 8637094791 please i need help
how can i get my navigation to work can you show me how thanks !!
If you get the kit from eBay, it will come with the instructions, and comes with this one wire that makes the navi work. The kit is about 100 bucks but worth it
Hey.. Did your factory navigation worrk with the aftermarket radio?
Yes it did but the kit from eBay that came with the resistor for Navi to work isn’t available anymore.
Here’s the link to the kit that carries everything to keep your Navi also krankitup.com/acura-tl-kit/buy.html
The av cables quick question i npw there a ground in each cable an positive did u had to separate them on both or did u just strip it an connect the cables ? I need help on the part any one or can i c the diagram
L G what wires
yungmexican32 the ones for the amp to get the sinal for the amp to connect the rc/av cable to back of the stereo
L G I gotta check on that kinda forgot I got the instructions somewhere
yungmexican32 i will really appreciated if u can help me out with that bro foreals am stuck on that bc i spilt does wires an theres 1 more wire in the wire that i had to spilt an from what ive see utube one is pos an other negative but am lost on that part lol
L G lol gotcha did you get the kit? I actually just got another tl and replaced the radio haven't posted the video tho but I got the instructions somewhere lol
Hey, how did you separate the radio from the Nav unit? I plan on doing this. If you could let me know that would be awesome.
First you need to remove the radio bro, then once you remove it there will be some brackets holding both radio and Navi, there will be a few bolts, remove those and you will separate radio from Navi, if you get a kit on eBay it will come with new brackets to hold you’re after market radio in place below the Navi, it’s simple but it does take work.
what size screen can you fit with the dash kit?
It was the 180bt I don't remember but that kit fits pretty much all double dins. It now has a different radio the avh-x4800bs 7" double din. And looks really now it also has a rear view cam and the steering wheel controls also working nice set up.
Good video, You think to work with 1 single din?
I'm sure they'll have the single din on eBay too
Nice setup ! Can you still use your volume controls on your steering wheel ?
Jermaine Marulaz i did i got the steering wheel module ..
Whats up man I have a question do you remember what type and size of resistor you use
I don't I got it with the kit through eBay. I was talking to someone that commented on here and he said he used an 80ohm resistor wouldn't be sure you'd have to try it out man. Just go to radio shack or amazon and get 80ohm resistors their super cheap and you can try it out.
yungmexican32 Ight bro thank you so much but how many whatts for the resistors I know is 80 ohms but how many whatts
I wouldn’t be sure on the Watts I know there are a few different ones but not sure bro.
what model is pioneer double din?
Bro i need help to conect mine double din
Hey buddy you still around?
I'm wondering if you still have the paper instructions? I know you get rid of the car.
No bro I had them somewhere but they most likely ended up in the garbage. It suck that this kit it’s not for sale anymore
The stereo is on but no sound a all
hey man I bought the kit but it didn't come with instructions...where can I get a copy of them ?
The kit on eBay should come with the instructions, you should send a message to the seller. But in my video I show how you tap the wires shouldn't be complicated
thanks for the info
did you upgrade the speakers as well in the tl?
if not did the center and sub still work and how was the sound?
No i did not upgrade the door speakers but I did add a 12" sub. It sounded really nice makes a difference having an aftermarket radio.
ay man i have a single din radio pioneer and my front speakers work but my rear speaker are not doing any sound and i already checked the wiring in my radio to the car and everything is right and im not sure that is because i dont have the factory amp i took it out and just added and amp and 2 12"s in the back
You removed your factory amp? And replaced it with a four channel for the door speakers?
yungmexican32 i just hook up the wiresond the stereo for the front and back speakers but the back speakers has no sound i dont have the factory amp i just have an amp on the back with 2 12s
There is a factory amp on the tl so make sure u have the right harness bro with rca instead of just the simple one that only has wires. And you plug you're rca to the back of the radio for the front and rear like u have a 4 channel amp.
i need your assistance trying too hook up a dbl din pioneer and two 12s to a 1000 watt amp
you my navigation is not work when instalen radio
Where did u get the resistor for navigation?
Yungmexican32
Hey what's up bro, everything comes with the kit that I bought. But I was looking for the kit on eBay couldn't find it anymore, there are some other kits but don't have the resistor anymore.
you my navigation is not work when instalen radio
you my navigation is not work when instalen radio
It won’t work unless you get a resistor to tap to Navi wires.
the resistor where I can get it oh I can put it straight without resistor