Thanks for the great video. I am getting my Macan ready for inspection and took a look today. I'm going to need help with the 21 mm bolts. Did you use the jackstand to level up the control arm to make it easier to get the impact gun in place?
Hey it’s my first time doing my pads and rotors but it seems that the two 21 mm bolt for the calliper won’t budge. I’ve been stuck on them for 2 hours. Any tips on how to remove it?
This is what I did, may not be the proper way, because it’s the pads only, and I didn’t have the scan tool for retracting the parking brake the proper way, but it might help? ruclips.net/video/ROD94-ufg2o/видео.htmlsi=gGAtChUxDnC2ebST
The “Tanya Harding” Got me in tears 😭😭😭
Brrrrrooooooooo!!!!! 😂😂😂
my front caliper pins are always frozen stiff (can't knock them out! corroded) - and have to take a reciprocating saw to get them off
Excellent replacement demonstration Thank you very much.
@@Rob99933 thank you !
You don't have to push the pistons back with a c clamp?
Great video, easy to follow- Thanks !
Great in depth video!
You help me so much. Thank you. Plus, you safe me a few hundred dollars. Keep up the good work
Thank you so much! So happy to hear you saved some money!
Take care,
-Dan
Great vid. Is it the same for the passenger side? Is it the same for the different trims Q5 3.0 and SQ5?
Yes it same on passenger side and same for different rims
Rotor size 320mm or 345mm?
I did this and now have a electronic parking brake malfunction light, do you have a solution for this?
Do you have a video with the same make and model car for the rear brakes?
ruclips.net/video/ROD94-ufg2o/видео.html
This is for the rear brake pads on the same car.
Thanks for the great video. I am getting my Macan ready for inspection and took a look today. I'm going to need help with the 21 mm bolts. Did you use the jackstand to level up the control arm to make it easier to get the impact gun in place?
Clean job
Very nicely done! Thank you 😂
Hey it’s my first time doing my pads and rotors but it seems that the two 21 mm bolt for the calliper won’t budge. I’ve been stuck on them for 2 hours. Any tips on how to remove it?
Bigger impact and maybe use a heat induction tool to get ghe bolt warm to give u rhe best chance
More power
I dare you to show you fixing the rears properly...
This is what I did, may not be the proper way, because it’s the pads only, and I didn’t have the scan tool for retracting the parking brake the proper way, but it might help? ruclips.net/video/ROD94-ufg2o/видео.htmlsi=gGAtChUxDnC2ebST