Ikea HELMER Drawer Office Unit Assembly

Follow TechGuru Andrew on social networks
Facebook ► bit.ly/2J2CKOC
Twitter ►bit.ly/2J14B1D
Instagram ► bit.ly/2x5bn0z
Amazon : amzn.to/2k7WJTv
#TechGuruAndrew
#IkeaHELMERDrawerOfficeUnitAssembly
#IkeaOffice
#IkeaHELMER
#Ikea

[@MrSanzosupreme]

Just like some others I was so confused with this one. My first ever all metal flat pack (I made the mistake thinking the unit was wood). This video was really easy to follow. Straight forward and to the point. Thank you so much!

[@xSabinx1]

Are you happy with the quality? Does it feel flimsy?

[@misqueluver]

Your instructions were way clearer than the ones that came with the unit. Thanks

[@Yatana108]

This was one of the most stupid IKEA designs, the assembly is such a waste of time. I wish I didn't buy this

[@naijabridges7227]

Can’t even get the other side to lock

[@afayemiro7474]

I almost paid for someone to do this. You saved me money. Thank you so much.

[@Cyburwalrus]

Thank you for the video. This was my first IKEA and I’m never buying from there again. I got the metal frame bent so the legs won’t fit - but nothing a hammer cudnt solve.

[@TechGuruAndrew]

You welcome,Correct Low quality.

[@judemadeanotherchannel]

If your drawers keep falling out: You have to push the side metals until you hear it click. It should pop. That way, your drawers does not fall out.

[@Siyayabjd]

You just saved me hair pulling. 👍🏾

[@judemadeanotherchannel]

@@Siyayabjd lol you’re welcome! i always shop at ikea and this is the hardest thing i ever had to assemble

[@giaonguyen776]

help! they’re not clicking in

[@PabHearts]

The click happens on the square shaped hole when the tab AND the bump ABOVE the tab goes completely into the square shaped hole. For me, my tab parts weren’t opened enough for it to hook completely on the metal which didn’t give the bump room to fit 😢 it finally worked after I opened each of the tabs (test each tab by hooking it on to the end of another side metal piece, the tab should go all the way flush with the metal and if not you can apply some pressure and open it wider). Good luck!!

[@user-bp6gp2rc1v]

Not the easiest IKEA unit to assemble!! Thanks for your help - without you it would have been back to front and upside down.🤨

[@VedicNurtureYogaStudio]

Thank you so much Andrew for the details instructions. It was very helpful 😊

[@janwoods1499]

thanks you were so easy to follow and so clear in your instructions

[@TechGuruAndrew]

You welcome please SUBSCRIBE 🙏

[@nansank]

Thank you very much! This was a thorough visual guide.

[@ashkool]

Thank you Andrew, now I can assemble easily ❤

[@DianaBlabla1]

Wow sir, thank you so much for taking the time to film tutorials for strangers! This would have been such a headache without you!

[@julisa80]

So expensive and so annoying nothing fits anywhere i wanna cry

[@julisa80]

@Aprikoseng no I left it half done, its in my garage abandoned

[@user-gb8ld4vz1f]

Thank you so much. This was so helpful.

[@saigethelibra]

any suggestions on how to get them to click? i feel like i am going to break it with how hard i am pushing and nothing seems to click as soon as i stand it up they all fall out :( i am also worried the metal may be bent? not sure how to go about fixing that :(

[@omerats96]

Don't push downward, push downward AND forward, diagonally.

[@HitherandYarn]

Unfortunately, you hadn't made this video yet when I had to put mine together. Never heard a "pop"!. Very good instructions tho'.

[@ricchandler]

Thanks for this video buddy, as the ikea manual as always is useless and very confusing, you are great !!

[@TechGuruAndrew]

Glad you liked it! Please subscribe thanks 😊

[@tzelladelta]

Does not worth the time it takes to build. Mine just kept falling apart during assembly. Stupid metal bending instead of screws. IKEA trying to reduce costs instead of improving the customer experience is just plain stupid.
Thank you for the video though, it would be in the garbage if it wasn't for you

[@davemcelfatrick6202]

There’s nothing to push in to connect the top

[@nixon01041974]

Thank you this helped me a lot!

[@ammo_sc]

my top shelves won't align with the rest so every time I put the top on they just fall out. I don't understand

[@fretsman68]

Thank you, most helpful, and you were very thorough-

[@TechGuruAndrew]

You welcome please SUBSCRIBE thanks

[@Megumi646]

The top just doesn’t get on

[@andre_resin2208]

you
da
man
jesus bless

[@brandnewayurveda1835]

Your video is very useful for us all , because we all are definitely super disappointed by the fact that we paid full amount for these bendable metal sheets which are actually 💩-iest product ever.

[@gaiuspadme6344]

would if be possible to use two of these as table legs? planning on a new desk for my gaming pc

[@starbow2244]

dont do this, its not stable and you wont really be able to attach your table top very well

[@YT_Mist]

Would I be able to put a 55 inch tabletop on it, or would they break?

[@Devr0ss]

The Helmer paper instructions have the bars the wrong way, so frustrating.

[@jasheljones6332]

The left leg is not clicking! The right one clicked so easily

[@donnalackey6365]

neither of ours clicked

[@headerahelix]

Kiitos paljon

[@geobrown9413]

Thanks for that! Looks like pretty "WONKY" construction, suitable for only storing wool or rice cakes, nothing heavier. Often see those for sale used...I'll pass now. Those "metals" you are bending over are properly called Tabs or Ears in English.

[@onlineamiga]

"easy process" 3 hours later and lots of swearing, but thanks to this video i managed to!

[@haon2205]

It took me 6 hours without watching this video.

[@Maritza.I.Rivera]

I put the leg incorrectly. Is there a way to pop them off?

[@haon2205]

It really looks like a premium wood...

[@jgyful]

Can it be disassembled?

[@danielpereira4542]

My wheel bolt doesn't go in all the way, is it supposed to?

[@user-bp6gp2rc1v]

Me too. Even with electric screw driver - I ended up with them halfway in and … a touch of superglue, as by then I’d have done anything to get the task finished. And to think I nearly bought two units…

[@Jennie-mm5zd]

How I follow all the steps but when I put the bottom drawer there's a gap at the bottom? Also, my drawer sliders keep falling out? I wiggle them and they are secure but when I move them up or down they fall out with the slider pressure

[@xing091]

same,

[@judemadeanotherchannel]

Hey guys. Same problem, you have to push the side metals until you hear it click. It should pop. That way, your drawers will not fall out.

[@judemadeanotherchannel]

@@xing091 check my reply below. Hopefully it helps you.

[@theanontala4371]

Και πως μπορω να βγαλω τα συρταρια τελειως;;

[@bigbutcher6752]

I love you men

[@ShaferHart]

How did people manage to put IKEA things together before youtube? lol. Just put words in your instructions IKEA! So lazy

[@cloudsurfing3900]

Hi, is there a way to stop the cabinet from moving and it staying still in my room?

[@johnliin]

Don't use the wheels?

[@Jday16]

Merci car avec leur notice a 2 balles , j etais à 2 doigts de craquer, mais perso ikea c est de la grosse daube. Quand je vois le résultat comment j ai pu acheter une merde aussi chère.

[@kickboxist]

Ωραιος ο ΦΑΙΔΩΝ

[@Belgianperspective]

Mine had a default that made the assemblage impossible!!! Such a waste of time, such a rubbish!

[@guruteja2709]

Gurteja

[@getthefffffoffme]

Nice .. Borat