DIY mobile table saw workbench
HTML-код
- Опубликовано: 5 окт 2024
- In this video, my first one, I'm going to build a DIY mobile table saw workbench for my Dewalt DWE7485-QS. This is also my first woodworking project and as a beginner I made some mistakes.
I have a few more projects planned that I will share with you.
I will try to show you the complete build.
Hope you like it.
You can find the FreeCAD files and a spreadsheet with all the measurements of the boards used in this project at the link below.
drive.google.c...
Music:
Track: Juno
Music composed and recorded by Oak Studios
Creative Commons - Attribution ND 4.0
• [No Copyright Music] J...
Track: Summer
Music composed and recorded by Oak Studios
Creative Commons - Attribution ND 4.0
• [No Copyright Music] S...
Track: Woods
Music composed and recorded by Oak Studios
Creative Commons - Attribution ND 4.0
• [No Copyright Music] W...
#woodworking #tablesaw #DWE7485 #workbench #DIY
You do have to spend some time setting the saw up... blade, fence, etc. But once done, the saw is great. Fairly compact which is Nice ruclips.net/user/postUgkxXh-4_3-ZT1fFWP91ZV7iVqzElr0lEb-a I did get an Incra Miter Gauge which takes some setup as well. The stock miter gauge can be adjusted in the miter slot with a little painter's tape... this tightens up the side to side play a lot.
Indeed!
Thanks.
I haven't seen anybody on youtube using a corded drill for years, I love it! Best example that the willingness to do something is far more important than a big machine park. Great work.
Loved it, a very humbling and refreshing video. Glue spread by finger and wiped clean on the back of the pants, eyeballing dowels holes, changing bits with a keyed chuck, no impact driver and getting the young apprentices in to help. Had me thinking about how simple life can be and how difficult we have often made it. The end product was just as functional as any of the similar but far more elaborate and complex builds I have watched. I didn't see any mistakes made, just a person both learning and imparting new skills.
I'm glad you like it.
Thank you.
As a father of two daughters myself, it’s very nice to see your daughter looking to spend time with her dad. Enjoy it; they grow up to adulthood before you know it
Thank you. Hope she keeps helping 😀
I love seeing your helper in the shop with you!
Me too!
Thanks.
Nothing I didn't enjoy about this production. Great workstation!
Thank you 😊
Очень очень очень хорошо)) благодарю вас💪🤝. Нужно свой стол переделать теперь
É bom compartilhar o trabalho com as crianças. Que deus os abençoe
Thank you. I appreciate your level of skill and attention to detail. It was refreshing to see you engaging your children in the process. I look forward to viewing more of your work.
Thank you for your words.
Muito bacana ficou excelente seu projeto BANCADA para SERRA foi uma ótima apresentação e muito boa à demonstração valeu obrigadao 🎉🎉🎉🎉😅😂😂
Obrigado pelo teu comentário!
First build and you make that... Man that's impressive as heck! Massive kudos. You definitely have an aptitude for wood working clearly. I hope I can one day build a table this nice and functional. Also as others have said it's beautiful that you teach your children from a young age these skills. Not only are they learning to create a table, they're learning independence from consumerism, building creativity, and confidence. Thanks for sharing this video with us.
Thank you very much!
Very well done sir!! The table looks fantastic. And I love the workshop, especially the ceiling beams.
Thank you. It's a very old house 😀!
They're not made like that anymore.
Nice Job and cool video processing ! BRAVO for your first !
Thanks 😀
I designed a table similar to yours i.e., notching the vertical 4X4 on two sides. The only difference is that I cut my horizontal pieces at 45˚ so that I would not have any end grains showing. Mine was a workbench but now after seeing your outfeed table I am going to build one like yours. I am thinking that I might try and incorporate a router to make it a little more versatile. Love your design, craftsmanship and also a fine job on your first RUclips video. Good luck on your RUclips journey. That is something I have not tried yet.
Thank you for your words. I also thought about incorporating a router but I another project for that. Still making sketches...
That's a nifty miter saw you got there. I really like the form factor. Must be easy to carry around I reckon
Excellent, well thought out design. I appreciate you producing and sharing this with us. This is exactly what I need in my small shop. I'm going out to the shop in a bit and start on one of these myself🙂
Thank you for your words!
If you can, please share with us your workbench. I need to build another for my miter saw and some storage and I'm sure I'll learn something with you.
все гладенько та рівненько! мені сподобалось. але ж я б ще добавив хоч одне колесо на нижнє перехрестя. бо дуже немаленький стіл, під навантаженням може провисати. лайк!
Thank for you comment!
I thought of doing that to, but after 2 years I still didn't notice any problem.
If it happens I can still put more castors wheels.
Good Job. I am working on plans for a 42 inch high workbench (I get tired of constany haveing to bend over). I wanted to include provisions for a table-saw. The DWE7484 is one that I am considering. However DeWalt says the dimensions are "28 high x 14.2 wide x 26.75 long, 54 pounds". I did believe it was actually 28 inches tall. I exported your assembly drawing to an STL file and imported it into ARES Commander. The dimensions I got from that were 22.5 inches wide x 22 inches deep x 13 inches high. Thank thee 🙂
This is excellent work, I’m about to go buy one of the Dewalt saws you’re using and was looking for clear plans to build an out feed table. Top shelf sir!
Excellent craftsmanship sir. Well done.
Спасибо за проект FreeCad
You're welcome!
Excellent job. Thank you very much. Helped me a lot.
Nice design, and your video production is excellent; enjoyable to watch.
Thanks. I hope I can continue to post videos that you like.
Good workbench, good luck with your new projects
Thank you. It's nice to be able to share my projects. Hope you like them.
Such great design and video work! Thanks for sharing!
Awesome video and workbench! Keep up the great work!
Nice saw and bench came out nice. If you are looking at cordless drills, Dewalts are well worth the money. Brushless are best (XRP series). No worry about mistakes, as your skills improve so will your ability to recover from mistakes. We all make them so dont sweat it. :)
Thank you for your words.
Boy, where do I start, first off what a great build and what a great video! I assume you live “across the pond” from America because I’m so impressed with how Europeans take what “we” call job site saws and turn them into table saws that accomplish the same damn things that we do with our high priced cast iron behemoths! I’ve got the DeWalt table saw DWE7491RS that has its own legs, it is so rock solid that I can’t bring myself to build what you did, BUT! You’ve given me a lot to think about. Again, great vid, really enjoyed it!
Thank you for your comment.
:) “across the pond”. Really like that one!!
gran trabajo
GREAT JOB
Thank you.
Just wanted to let you know sir if you can find it there is a specialty bit unit called a drill and drive, will drill the pilot, shank, and countersink in one function on one side and flip it over and your screwdriver bit is there, just a suggestion for a little bit of simplicity since you have a keyed chuck, but well done on the project nonetheless
Thank you for your suggestion. I will try to find that unit. It will make this kind of work easy.
Nice build and especially for a first project. New subscriber here.
Thanks!
SHOW!!!
Tanks.
Nice project. Just curious if you maybe should have put a castor or two in the center to support the weight? I myself have had to do that after the fact. Your editing and choice of music are very well done.
I thought of that, but my floor isn't level and I was afraid it would make it worst.
So far I have no problems with the workbench center. It feels very solid.
Thank you.
I’ve built a very similar bench, that are so useful. I hope you get lots of good use out of yours 👍🏼
thanks for the file!
Hope you like it.
Nice and inspiring! Thanks for sharing :)
Mantap,sambil kerja ditemani putri tercinta.
How are you liking the workbench so far? I want to build one similar to yours.
So far it's been working great for me. There are some improvements I want to make, like adding some drawers and a vise. Also some heavy duty castors. The one's I used are a bit flimsy.
Thank you for watching.
Great video, nice project. I like to build one similiar to yours 👍
Thank you.
You can download the file and try changing it to suit your needs.
Good job !!!👍💪💪
Awesome build. I am going to use this to build my table. I went to the google drive link to download the CAD files. I have autodesk but when I try to open the CAD files they do not open. What program did you use to create these?
I was able to access the spreadsheet with all the cuts. I am excited to get this built!
Thank you.
I made this files with FreeCAD.
www.freecadweb.org/
Хорошая работа 👍 Но если б не маленькие помошники😉у Вас ничего не получилось!
Indeed! Saved by the little helpers! 😃
Nice job! Are you happy with the cutting height of your 7485? I'm wondering if the 65 mm are enough or not, cause there is a huge price's difference between this saw and the bigger 7492...
Thanks!
Sometimes I wish that the 7485 had a bit more cutting height, but generally it is fine for my projects.
Perhaps a band saw would be helpful... Not sure.
@@tabula_rasa_abt Thanks for your reply!
Great video! Did that fence setup come stock on the table saw?
Yes it did.
Thanks.
Do you have the plans on inches I don't understand work in mm
I download it to make this bench.
I will appreciate if you have it
Than you for your time and work.
I just lost my job for 21 years but God will help me now on. I bought this table saw to learn woodwork until find another job or learn how to make cabinets ect. Or whatever came.
Grettings from Puerto Rico 🇵🇷
My name is Ruben Medina
I will try to convert to inches with the software.
Don't know if I can...
Hello Ruben.
In FreeCAD you can change the measurement units Edit / Preferences / General. The will be a tab called Units.
Hope it helped.
I went through a lot of plans and decided to use yours. I just want to know how did you make the join at 7:17 ? Did you use dowels on both sides ?
Yes I did.
It was the only way I could make it. Probably there are other ways but it worked out for me.
Thanks for watching.
Hello do you have the plans in format . Pdf? I dont know how to use CAD
Hi.
I don't have pdf plans, but in the link in the video description there is a worksheet with all the measurements and quantities.
Does that help?
Thanks.
Tried to download your files and I can't view CAD files.
The files were made in a software called FreeCAD. You can only open them in that software.
Do u have the plans
They are available in the link in the description. You will need FreeCAd to view them.
Почему нет размеров, я хочу такой-же стол сделать.
Hello!
The file I have in the description has all the sizes. It's a FreeCad file. (Free software)
Thanks.
Ser gerne at du svare på mit spørgsmål, om at komme med nogle mål. Kan ikke læse dine tanker😪
Kan desværre ikke forstå jeres sprog, kom med det på dansk
Mangler nogle mål, ligesom på andre videoer der bliver vist her på You tube😔
Hello.
If you download the FreeCAD file you will find all the measurements.
To build this workbench I used european Nordic pine.
I'm sorry for just answering now.
Det ville være rart med nogle mål, samt hvilke materialer der bliver brugt og tykkelser😪👎🏿
Too much RUclips fluff i.e. scenes of mundane tasks.
REALLY SUCKS
You ok bro?