Just curious... Have any of you who are racing or running r/c boats tried a gyro on the "rudder"? I'm just curious if that would be effective at super high speeds, especially in 'turbulent' water.. Have not researched so maybe I'm asking a stupid question.. I fly R/C Jets, helicopters.. You name it.. We use single gyros sometimes just for steering after landing.. Not always, but it helps when there is a cross wind for sure.. Outside of that.. Love your boat and your enthusiasm!!
Great video and congratulations! I’m a newbie and I noticed that your props are pushing water inward. My Zonda manual has mine pushing water outward. Which is correct? Thanks
Probably already answered but both are correct , the boat might be a bit more stable with outward spinning props but for top speed and less power cuts inward spinning is a better option just dial back the steering so its not as sensitive . A few videos here on the Tube showing how this set up works , check out IRONCLAD RC channel where he does this comparison with prop direction on his Animal .
Hey my brother congratulations to you! My Lord that was incredible! I remember when I broke 70 miles an hour running brushed motors one-and-a-half to 1 gear reduction single-prop service Drive graupner U-joint drives! And I thought my battery's going to we're going to melt through the boat and by the way that was nickel-cadmium battery 1700 mxc Emmys! Good job brother great job thanks for the video
Gen1, what’s going on with your Miss G? I have just got some ABC style 1716 props for mine. What kind of strut angle will I need to keep her from going for a loop?
My geico sunk a few months back. Best thing for geico is running batteries far up front as possible but also be careful with overheating running bigger props.
Smooth. Make it faster though. Add more power and double the amount of motors and batteries, and stick a little boom / stabiliser to each side or a blade underneath so it lifts out of the water to go twice as fast. And wings and rocket thrusters and lasers and paint it bright orange to make it really fast. And wax it or use scales like shark skin on the body or carbon nanotubes to reduce weight and scare people.
My last zonda had hatch screws and still ripped the screw out on bad crash. I tape this one really well and has taken bad crashes already. It has twin SSS 1650kv motors.
I don't believe it was your maiden run because you didn't mention nothing about a maiden run in the beginning of your video find it kind of weird that u said it at the end of the video don't think it was the maiden run at all
Just curious... Have any of you who are racing or running r/c boats tried a gyro on the "rudder"? I'm just curious if that would be effective at super high speeds, especially in 'turbulent' water.. Have not researched so maybe I'm asking a stupid question.. I fly R/C Jets, helicopters.. You name it.. We use single gyros sometimes just for steering after landing.. Not always, but it helps when there is a cross wind for sure.. Outside of that.. Love your boat and your enthusiasm!!
Awesomeness!
You go! Your boat GOES! 107! JUST AWESOME!
Yeah Buddy! What did you outfit yours with bro? Motors & Props? Love the EXCITEMENT !
Well Done!
Immense Power In A Light Small Boat!!
A Super Fast Rc Model
Good Job!!!
Thanks 😀
Great video and congratulations! I’m a newbie and I noticed that your props are pushing water inward. My Zonda manual has mine pushing water outward. Which is correct?
Thanks
Probably already answered but both are correct , the boat might be a bit more stable with outward spinning props but for top speed and less power cuts inward spinning is a better option just dial back the steering so its not as sensitive . A few videos here on the Tube showing how this set up works , check out IRONCLAD RC channel where he does this comparison with prop direction on his Animal .
That’s super fast I bet you could drive that little boat right through somebody’s canoe 🛶 on that lake😮
Nice Ah.. Love This..🥰🥰
Nice maiden run bro 107mph is movin
Yes sir.. I can’t wait to get more testing with it! 👍🏼
Very nice. Mine hit 50 before the servo gave out and it smacked a pier…..so much scrap now
I’m sorry to hear that
Things badass!
Ye sir.. stay tuned! She’s got a lot more numbers to put out! 😀
Respekt, Klasse Leistung
Beautiful run!
Thank you!
Well that was badass !!!
Incredible
Thanks bud!
Wow.
Can you make it a little bigger?
You could do a roaring trade running migrants from France across the channel to England!
😂
Congratulations. It's not fast, It's insanely super fast. Wow 👍
Thank you! 😂
good speed please setup
very nice. can you tell me what gps you have and you see it from your phone, and what battery you use 6s?
Thanks!.. I use the skyrc analyzer. The batteries are 4s zeee packs.
Nice 👍🏽 😮
Hell yes get it boy get it
Trying to! Thanks! 😀
The 2nd run looked sweet, it’s definitely moving , hope to get my BlackJack up to 60 mph next time out. Good luck 🍀 with your boat.
Thanks man.. hope you get that BJ moving fast brother!
Coś
Hey my brother congratulations to you! My Lord that was incredible! I remember when I broke 70 miles an hour running brushed motors one-and-a-half to 1 gear reduction single-prop service Drive graupner U-joint drives! And I thought my battery's going to we're going to melt through the boat and by the way that was nickel-cadmium battery 1700 mxc Emmys! Good job brother great job thanks for the video
Thanks brother glad you enjoyed the video!
Not bad on AA batteries man..
Lol yeah in the controller not even. So what are you running ? 6s ?
8s 1650kv motors. 👍🏼
@@gen1speedrun679
Hot damn.. that thing has some power ..
Awesome work and boat.
Gen1, what’s going on with your Miss G? I have just got some ABC style 1716 props for mine. What kind of strut angle will I need to keep her from going for a loop?
My geico sunk a few months back. Best thing for geico is running batteries far up front as possible but also be careful with overheating running bigger props.
Oh I am sorry to hear that. What bad luck.
Sympa👍
Smooth. Make it faster though. Add more power and double the amount of motors and batteries, and stick a little boom / stabiliser to each side or a blade underneath so it lifts out of the water to go twice as fast. And wings and rocket thrusters and lasers and paint it bright orange to make it really fast. And wax it or use scales like shark skin on the body or carbon nanotubes to reduce weight and scare people.
You my friend are a little blind… this boat came with rocket 🚀 thrusters! 😂
slow down on the cocaine my man
how much would it cost for me to buy this boat
Depends on the setup if u want 100mph+ around £1000+
That’s a small boat for 107 damn
What props are you using
@@chadjohnson2920 dasboata
What is V3 DY?
how much tuning do these take versus like a sonic wake which can be tuned day to day.
It’s not too bad.. just set the drives at neutral and work your way from there.
Good Number
38.5” Hull??
Thanks.. yes 38.5 hull! 😀
What happens if it crashes??
You never really know… it may or may not come back home 😭
Very impressive. No hatch screws? What motors in her?
My last zonda had hatch screws and still ripped the screw out on bad crash. I tape this one really well and has taken bad crashes already. It has twin SSS 1650kv motors.
@@gen1speedrun679 Are you running 8S?
@@christophercurry7410 yup
@@gen1speedrun679 Instant speed! What kind of ESC’s did you have to use?
@@christophercurry7410 spektrum 160 esc
SMC V3 drag packs??.
Yes sir!
Imagine u r a fish in that lake how will u react
I don't believe it was your maiden run because you didn't mention nothing about a maiden run in the beginning of your video find it kind of weird that u said it at the end of the video don't think it was the maiden run at all
107 mph no no no video
@@miauxjoel1711 ruclips.net/video/o99ALcUegWE/видео.htmlsi=5brsc6Hf8NncZhfu
Bro ive watch RC cars go 100mph but on water it just looks much more vicious
It’s wild for sure bro! Thanks for watching.