Baofeng UV-5R UV5R Disassembly Teardown : Eye-On-Stuff
HTML-код
- Опубликовано: 10 сен 2024
- Baofeng UV-5R UV5R Disassembly Teardown : Eye-On-Stuff
Please consider donating to my channel so I can make more videos for you:
www.eyeonstuff....
In this video I will show you how to disassemble the Baofeng UV-5R dual band ham radio. This is a complete tutorial including re-assembly.
MY OTHER RELATED VIDEOS:
CHIRP Programming Tutorial with the Baofeng UV-5R UV5R:
• CHIRP Programming Tuto...
Mars/Cap Mod:
• MARS/CAP MOD for Yaesu...
The Original Ed Fong PVC Pipe Antenna:
• The original Ed Fong D...
Baofeng UV-5R UV5R Disassembly Teardown:
• Baofeng UV-5R UV5R Dis...
Baofeng UV-5R UV5R Dual Band VHF UHF and New Paint Job:
• Baofeng UV-5R UV5R Dua...
TRAM 1185 Dual Band 70cm/2m Mobile Antenna Review:
• TRAM 1185 Dual Band 70...
Baofeng Wouxun Antenna Connectors:
• Baofeng Wouxun Antenna...
All my videos are here:
/ @eye-on-stuff5248
www.eyeonstuff....
If you found this video helpful, please Like and Subscribe to see my future videos.
Thank You for your support!
#eyeonstuff #coolstuff #learnstuff
You can tighten the nut for the antenna connector using the volume knob. It's got a built in tool for the job!
Now THAT'S a really cool tidbit of info and a great feature. It is always a bit challenging to get those off without scratching something even with the adjustable spanner device I have or my needlenose pliers with the very fine points. BRAVO and Thanks!👌👌👌
I've been using these radios for 10 years and this is the first time I'm hearing about this. Thanks!
I broke my monitor on my favorite Baofeng.... and this video shows me exactly how to get to it! You thought of all the details, including using a flat item (blade) to keep the soft-button from getting pushed out of place during reassembly. Thanks for this! Just saved my favorite radio by letting me do a repair without breaking my radio!!!
Wish you would have shown removing the speaker in order to paint
Just buy a color one
I have a UV9R-ERA, slightly larger radio and additional water/dust resistance. This was a very helpful video to get mine apart. Main differences - remove battery first, there are 4 TORX screws on the back under the battery rather than 2 (T8 worked), speaker and accessory connection are attached to the radio with a ribbon cable, plus there are O-rings and gaskets on most connections which require additional caution for disassembly and assembly.
I have the UV9R-plus, and thanks to this vid I could get it open. My signal reception was very poor (on a new unit!), but I managed to fix it by resoldering the antenna connection on the PCB, and cleaning some green muck (corrosion?) from the PCB. 🤘
When shooting against a white background you should boost your exposure a little. Otherwise the camera tries to just calculate neutral gray for the whole scene and you get this. Under exposed details against a grayish background.
Sir, Thank You for taking the time to educate the rest of us. You are very considerate!
From the looks of it, the BeoFang radio is assembled very nicely.
I followed this video in order to drill out the mic hole a touch larger. Transmit is much clearer now. Thanks for doing the video!
non-sense
Don't muck with needle nose pliers on the antenna connector. The volume knob has the correct cuts for loosening and tightening the antenna connector.
Great video. I Thank You for showing us the secrets inside our cute little Baofengs. Who wouldn't like this video? Apparently some think it's "Taboo" or "Naughty" I guess?
Some like it and some don't! It's the world we live in. There's always haters out there. Thanks for your comment.
When I was a kid, I took apart my walkie talkies and never got them back together. Electronics is what I ended up doing as a profession besides Information technology. It's all fun stuff! 73s.
.
+Eye-On-Stuff Best wisheses? :)
Thanks
That sounds a lot like me and i became an EE AND DESIGN ENGINEER AND WAS PRIMARILY involved with controlls and RF.
Thank you for this video. I just replaced the rubber keypad on my UV-5R thanks to this video! 73s!
- KD2DKO.
Congratulations on your Bao Feng UV5R diassembly/teardown video! You have produced a fantastically excellent instructional piece many of us value! Very well thought out and executed! DE N4BWD
I think it should be careful to take off the battery first.
Joabe
Always remove the battery= power source before disassembly. Number one rule.
Finally inventoried all my Baofeng's and found only one UV5R in black. :-)
From my experience, all the different flavors of the UV5 radios are really similar. Other models from other brands are suspiciously similar, too, and sell at many times the price. Every one of my Baofeng's work.
They're extremely versatile. The innards are almost artistic, both in form and function. Repair parts are even available,. They've become a type of standard.
That one other-branded HT I bought came in defective. Wish I had bought five more UV5R's instead. I find significant use in the UV5's hardware and associated software, employing them as much as instrumentation, as transceivers, Always at hand.
I even experimented on 1.25 meters. Cheap. Those pioneers who cobbled together their own Amateur radios would really envy these.
There is great value in professional grade communications equipment, but it cannot be shared as freely as these. I wish there was even more interest in them.
Thanks for the teardown video. I wish you would have just finished the last step and removed the board from the metal plate so we could all see the other side of the board. It's nice to get a good close up of the chips and coils.
Remove battery first!
And then solder and mains plug to the terminals then plug it into the grid. That's how you blow up a Baofeng UV-5R 😁🤣🤣
Had to fix my radio, was nice to have the video.
Thanks for your video, I try to set up a MONI buton properly for 1 hour ! :)
Would have been nice if removed the circuit board. I wanted to see the RF finals to see if GIANT heat sink could be added for continous duty.
Thanks you, I have been able to rapair, my walki. 💪
Now I know what I'll have to do to fix my speaker, which stopped working. Thanks.
I had to dismantle my UV 5R , the internal adhesive used around the screen had become problematic insofar as after cleaning created permanent trace marks on the screen cover , it's ok , just a little annoying , plus regardless of compressed air cleaning there's dust traces trapped .
That was very informational and helpful. Great step by step. Thumbs up and have a good day :).
hello a consultation disarmament arregalrle my handy for the speaker and makes me now to turn it all an continuanebte rain will ?
No matter what I try, I cannot get the board out.
You didn't take off the board, which is the worst part as you need to remove the display to get to two screws. When you refit the screen you might have problems with the display function.
How could any one not like this? beats me! thanks.
Mr. Squirrel Hates gotta hate.. Dislikers gotta dislike.
Mr. Squirrel Didn't push dislike, but it's only half of a disassembly.
its just like watching old woman playing BINGO
At least you were able to remove the back, like it was nothing. I've been prodding and prying for days now and can't get it off.
Absolutely superb. Thanks for the video!
I need a replacement speaker for a Anytone AT-D878uv. 40mm 16 ohm, 1 watt. This speaker from other videos is also 16 ohm 1 Watt but don't know the diameter. Would you know where to buy a replacement speaker?
On two of mine I have a scratchy volume control when adjusting the volume level.. Was hoping to get a spray of Deoxit in there by taking the radio apart but as I watch the video it appears that the volume control might be sealed making spraying the Deoxit impossible. Has anyone attempted to clean the volume control? Any luck? Thanks.....
I read that you may use the back of the volume knob to unscrew the antenna nut
i want to change the on-off switch...not find a part for this.
Lovely dear.
Remind me never to lend you my car!
Excelent! Thanks
Hey OM , Motorola, used to sell spanners for those nuts, came free with ever radio. I was hoping you would open the microwave casting, to show ppl how to repair/replace SMA connector. I had the joy of buying junked radios at auction , great learning experience. A young guy said" how'd you learn to fix that stuff?" I replied , My dad made me fix what I broke, or explain why I could/should not. No school like a junk box! KB5ZXM or FCC PG9-6292 cheer's . Good hunting for gremlins.
John Egan , these came with new radios, I bet any Motorola, radio shop has hands full, General Electric did the same. simple little things, like an antenna nut tool, but bent at an angle. Just two prongs on a flat strap, drill a hole , to allow shaft, cut the strap bend to suit your size.
could get it out its shell, im afraid im going to break it. so now i cant replace the broken monitor button
I've owned (6) UV-5Rs and the Modulation is always been half of other band radios! Is there Pots for Mic and Deviation adjustments or is this all Menu settings Nobody knows about! Great Video on the tear down and re assembly! Thanks!
Would like to know the same...
Hi, my UV 5r, On and off knob is broken, it doesn't have the click sounds anymore, can't turn radio on, do you know how to fix it please? thanks.
How to remove the speaker from the case , i want todo this because the case is broken and battery pull away xd
PARTIAL disassembly / teardown.
Why did you stop where you did, without so much as a comment?
Thanks!!
any difference from this 2012 edition from the 2017 ?
thank you
Thanks for watching.
Very good job.I am not a good man i practic things, but my microfone did not work. Excuse may bad English and many Greetings from Germany !
I glanced though this video briefly and I don't think I saw you remove the window that is in front of the LCD display. Is it possible to do so? Mine is scratched and I may have to look for a suitable replacement soon. Thanks!
nice sharing info , thank you for tutorial video
Thank you!
Thank u 4sharing 👍🏾⭐️⭐️⭐️⭐️⭐️
Where can I find parts for this radio ?
hello, can you say if there is a sola power plannel to recharge the battery on sale some ware.?
No worries if you break speaker wires. I did and it was not that hard to solder it back.
Anyone with soldering iron.station can do it.
Happened to me too...be careful with fragile speaker wires unless you love soldering.
I am thinking of rplacing wires with better, silicone ones... Next time I open it :)
I did it, snappy resolder job fixed it
Do you know if I could swap the body shell of a uv5r onto a RD5R?
Its a bit dark! I have my brightness on full and I still cant see it. I had to save from YT and put it in VLC and turn up the brightness.
Hello. Can you show antenna connector type and how it's soldered? I want to put normal sma.
NICE GARBITCH HAHAH SMECE DRUZE MOJ KINEZI NIKAD NISU RADILI NESTO DA VALJA IMAM GA I IMA SNAGE AL NA ODREDJENO FREQ... ZNACI NIJE DOBRO KALIBRIRANA... IMAM ICOM ON JE JEDNAKO NA SVE FREQ...
I can't pass the lift it off point, it's stuck and doesn't get out. 7:45
Anyone trying to do this for fun please stop. Chances are that the display will go for good.
There’s really another level of disassembly needed to access the items that go bad like the volume control power switch
When I turn mine on the LCD screen displays like a dead battery or something
can this be "opened up" for marine SSB? for monitoring purposes of course.
You can possibly cut out the window and replace it with new piece. Maybe some epoxy can keep it in place and also keep moisture and dust out.
Thank you very much for this video. My flashlight LED does not work. Seems like even if I opened the radio like you did, I will have no chance to fix the problem. vy 73s
+Jürgen Günthner Not unless you removed the screen
The moni button needs alignment. Mine did the same thing. I took it apart and now it works. So fix it.
Thanks for you answer. But I am not sure how to do that.
Is the trimmer on board for power output adjustment?
Not sure. If I find out I'll let you know.
I doub that there is one or a pot for deviation .
Muy muy lento te mueves,ya lo tenia desmontado mas de mitad yo,21 minutos de sacar 4 tornillos?
The plastic knob is a tool to remove the antenna washer.
What is the adjustment screw behind the label once you remove the battery
I think that screw (not adjustment) is part of what holds the radio together... probably holds the heatsink to the RF PA..
How about taking out PTT buttons for unlicensed users?
I'm a curious man, and i like to open things and look what is inside. I got same radio, and thanks to you video I don't have to open it to see what's in there. Thanks!
And i see you got an custom antenna. Is it better than standard one? What is your opinion about it?
+Electro nik I have this antenna, it's WAYY better than the stock antenna!
I took apart a Mercedes transmission one time for the hell of it.
I wouldn't call the uv-5r a Mercedes. It's more like a cheap used car that kinda looks new.
Always remove the power source " Before " you disassemble anything electrical or electronic 👍
You didn't open the circuit board.
You would need to unsolder display for that...
No you don't need to unsolder anything in the process. To take off the circuit board to get to the mic/headphone jacks. You simple remove all the phillips head screws. There is 1 screw under the screen. If you remove the 2 screws from the screen, just peel it back. It's not actually connected by cables. The screen lifts off easy. Just be careful when you replace the PCB, there are 4 small pins that need to be lined up that connect to power.
Lord Anubis You need to unsolder screen to peel it back. it has 4 points it is soldered on to a board...
@ no you don't. ruclips.net/video/4Ryv6j_CWdo/видео.html
Hi pal. Great vid.
I’m in the process of putting a UV-5RE inside a dummy PRC148 shell.
Like you I’m adept at electronics but I wanted to know how easy the on/off pot would be to unsolder and run on flyleads to another location?
Crashtest Airsoft I have not tried to remove the pot before. Since the pot has larger pads on the PCB, it might be easier than dealing with the tiny surface mount parts. Good luck!
Thank you, now i know, that the volume potentiometer is behind the lcd display. Hopeless.
The plastic window is attached to the body of the radio
Follower the instructions, but cant take it apart
did not go far enough.....to clean up the volume control..
thank you. i have relations with my dog
Those are razer knife
HI EYE-ON STUFF Realy enjoyed your video can you please help i recently removed the battery on mine with the unit switched on and now it wont work when you disassembled the unit did you notice a protection diode etc in the unit hope you can help DOWN UNDER TERRY CHEERS
I did not notice a protection diode. The ones I have appear to be fairly robust. I remember doing the same thing, removing the battery and not switching it off and i have not had any issues. I do remember one time the radio lost all power and did not appear to work, but I figured out that the battery was not making a good connection. I had to re-install the battery with more force and it started working again. In your case, maybe you can try another battery or check the voltage of the one you have. I hope you get it working.
@@eye-on-stuff5248 THANKS for quick response if you do hear a fix i would appreciate purchasing new unit have plenty of spare batteries now CHEERS
should have removed the power source FIRST.
El autor está totalmente loco; no tiene ningún sentido mostrar como desarma parcialmente el equipo, si luego procede a cerrar nuevamente el mismo. Lo que puede ocurrir al novato que quiera hacer lo mismo es que luego de cerrarlo compruebe que se quedó el equipo, sin audio recibido, o sea que no le funcione el parlante por rotura del cable que es muy delicado.
For wat porpose
I highly doubt there are any user-repairable parts inside this radio, so I don't see a reason why one would try this unless the radio indeed gets banned and they see a need to repair one with parts from another. Cool video though. Surprisingly well put together for a $20 radio!
This was painful, even at 2x
Хули-ж ты дисплей не стал отпаевать чтоб платку от радиатора открутить силовой транз бы показал да остальные кишки а так что это за видео так все разбирают