Hello 2009 nissan altima hybrid when locked the car don't have noise only light turned on .when scanning car have p0507 control bcm and car don't going in idle. Please what need too fix.
@@BestCarFixes thanks. It had an issue few years ago where the car would not start, had to jump start it and the steering lock would fail. We removed something in the column and pushed in a button to keep it depressed, since then the car has no issues starting. I think this may be the cause of the failure for immo? I also did bcm scan and it had immo errors and such, i cleared all codes then tried again and failed
@@BestCarFixes before i replace bcm, i will try unplugging the steering lock and plug it in very hard and also chan ge the fuse and or the smart key slot
@@BestCarFixes not not. I’m about to in a bit. I replaced the steering lock but it won’t unlock when I try to use im698 to unlock it, it fail. But I replaced fuses for steering lock and battery electric in passenger fuse for prox slot. I’ll try it shortly brother, thank you for all these videos and information
@@BestCarFixes i get a nissan altima maxima escl emulator and when i plug it in it is green meaning it is unlocked. But i still cannot program keys to the car...I think i need to replace bcm now, that is only thing i dont try yet. I replace steering lock 2 times, i replace fuses, i replace the prox key slot and no programming...can i program bcm if i buy used one with autel im508?
it is all what I need: a scanner programming capable to install a BCM ? Anybody can do it ? or I got to be registered as an certified mechanic in my labor department from my country to perform this type of job??
How much do a job like this cost in a shop or dealership?
بارك الله فيكم
Hello 2009 nissan altima hybrid when locked the car don't have noise only light turned on .when scanning car have p0507 control bcm and car don't going in idle. Please what need too fix.
How did you fix the AC fan not turning on ? I have the same problem. Also I cannot shift into D, can a bad BCM cause not shifting into Drive?
Can the BCM be reset if it is throwing codes with the machine you are using or do you have to get another and can you program it with that computer?
if the bcm is bad you have to replace it and program it
Got you, but what I am wandering, can that computer you have program it? I am trying to avoid the dealer. Zero trust towards dealers.
Boss I lost my key locksmiths saying they can’t program key I replaced lock module and key slot thing still saying key not detected
I changed the bcm and the steering lock module do i need to change the car chip key immobilizer before i take it to get programmed
the earlier cars no need the newest you have to have a new chip
Do you have to unlock steering every time I program or is it a one time thing?
The yes but in some option you dont need that
I have 2009 altima and autel im508. The steering lock has issue and I get failed like you did and cannot add key. Any tips?
yes if it fail you have to change it first
@@BestCarFixes thanks. It had an issue few years ago where the car would not start, had to jump start it and the steering lock would fail. We removed something in the column and pushed in a button to keep it depressed, since then the car has no issues starting. I think this may be the cause of the failure for immo? I also did bcm scan and it had immo errors and such, i cleared all codes then tried again and failed
We're are you located?
Brooklyn NY
Bro can you help me my car 2009 altime everything ok but car is not start an coil not coming cerunt
also, my 2009 nissan altima key programming slot does not light up, could that be issue too? This thing is driving me crazy haha
Yes it hapened to me check fuses under the driver side dash
@@BestCarFixes before i replace bcm, i will try unplugging the steering lock and plug it in very hard and also chan
ge the fuse and or the smart key slot
@@BestCarFixes thanks, i will replace fuses for 6 and 10 intelligent key system and bcm
i replaced my steering lock (not bcm yet) and i am unable to unlock it, it says failed, do you think the steering lock i bought is bad?
did d you program it
@@BestCarFixes not not. I’m about to in a bit. I replaced the steering lock but it won’t unlock when I try to use im698 to unlock it, it fail. But I replaced fuses for steering lock and battery electric in passenger fuse for prox slot. I’ll try it shortly brother, thank you for all these videos and information
@@BestCarFixes i get a nissan altima maxima escl emulator and when i plug it in it is green meaning it is unlocked. But i still cannot program keys to the car...I think i need to replace bcm now, that is only thing i dont try yet. I replace steering lock 2 times, i replace fuses, i replace the prox key slot and no programming...can i program bcm if i buy used one with autel im508?
Hi brother, you didn't change vin number.
you dont need to change a vin number on the bcm only on ecm
it is all what I need: a scanner programming capable to install a BCM ? Anybody can do it ? or I got to be registered as an certified mechanic in my labor department from my country to perform this type of job??
if you have the tools you can do it
@@BestCarFixes thank you!
Hello can I talk with you?
Where is your garage?
brooklyn ny