Hey great video. I had the same problem. I change the bcm and some other modules with use one. Now everything works but the transmission slam or slip when changes from 3 to 4th gears. Does the bcm need to program and is it why am having this issue. Please let me know what u think.
My car dash hasn’t been working since I recharged my battery and changed the battery terminals. I left a link to the RUclips so you can see what it is doing
السلام عليكم ورحمة الله وبركاته مساء الخير استفسار عندي infiniti q60 2015 والشاشة جيت اعمل إعادة ضبط الاعدادات ويبدو ان تحديث الشاشة انحذف والحين الصوت والكاميرا والمميزات الثانية ماتشتغل وش الحل وهل في احد مره عليه المشكله
Salam brother. Can you send me a link to the laptop and usb cord you used in this video. I am trying to start a mechanic shop with my savings and this would be valuable information!
My car keeps dying battery goes dead over night car runs and drives fine everything Electrical works just new battery dies over night and I installed a new Alternator
Hey i have replaced a ecu had it progammed and it didnt start then i replaced the bcm had fhay programmed as well. All the lights turn on but engine wont crank. What can be the issue
@@BestCarFixes Wow, i'm from BayRidge. I have a 2013 G37X that had BCM water damage. The car wouldn't shut down and the electronics went crazy and then wouldn't start. But eventually started it after fixing the leak and weeks of drying out. I bought a used replacement BCM. Do you have a shop I can drive to for programming?
Where are you located, what do you charge for this?
Hey great video. I had the same problem. I change the bcm and some other modules with use one. Now everything works but the transmission slam or slip when changes from 3 to 4th gears. Does the bcm need to program and is it why am having this issue. Please let me know what u think.
Did you program the BCM?
@@dicapriosiksei1752 no i didn't i just went and put a use transmission.
First thank you for your all videos. Second , could tell me from where i can find the device that work with nissan consult plus?
My car is having the same issue, found water leaking behind the battery into my BCM. If I buy new BCM the part number is 284B1 right?
Friend, can that programming be done with Autel im608 ?
My car won’t start now what could’ve gone wrong?
Can you buy one of those laptops with dealer consult system on it.
My car dash hasn’t been working since I recharged my battery and changed the battery terminals. I left a link to the RUclips so you can see what it is doing
for consult 3 what connector are you using from computer to infiniti?
regulars USB CONNECTOR
@@BestCarFixesHe's asking about the vci. He is calling it a usb cable😂
great job how do u calculate the pin code with a calulator?
Younget the 5 digit number off the bcm.
السلام عليكم ورحمة الله وبركاته
مساء الخير
استفسار
عندي infiniti q60 2015
والشاشة جيت اعمل إعادة ضبط الاعدادات
ويبدو ان تحديث الشاشة انحذف
والحين الصوت والكاميرا والمميزات الثانية ماتشتغل
وش الحل وهل في احد مره عليه المشكله
Salam brother. Can you send me a link to the laptop and usb cord you used in this video. I am trying to start a mechanic shop with my savings and this would be valuable information!
I need that cable as well.
Are ya talking about the vci? It's not a usb cord, and it's like $3000.
My car keeps dying battery goes dead over night car runs and drives fine everything Electrical works just new battery dies over night and I installed a new Alternator
I can’t find Nissan supercode to download!! Where can I find it
You ever found it
Hey i have replaced a ecu had it progammed and it didnt start then i replaced the bcm had fhay programmed as well. All the lights turn on but engine wont crank. What can be the issue
Did you find the issue
starter or the steering lock module
Same thing is happening to me 😅 pls help
Can that method work for 2007 g35 sedan
Yes
how can i take this tool
Where you located
brooklyn ny 11203
@@BestCarFixes Wow, i'm from BayRidge. I have a 2013 G37X that had BCM water damage. The car wouldn't shut down and the electronics went crazy and then wouldn't start. But eventually started it after fixing the leak and weeks of drying out. I bought a used replacement BCM. Do you have a shop I can drive to for programming?
My gas gauge wont read less then 3/4 even if its enpty
I got the same problem. What did you do?
That’s part of the AC AMPLIFIER TEMPERATURE CONTROL MODULE for the gas gauge not work. You can take it apart and resolder it.
Assalam Walekum
You need to speak up man whisper and nobody can hear a single words you're saying over to buzzer in that car