Feedback- So guys it,s been 6 months now I am using this setup with no issue at all and completed 6000 plus km till now after the setup. It holding beautifully no any major or minor issues I have face.
@@phanibapanapally4049 Bro installation video I can’t make make removing tyres all over again is big task. But i cam connect with you if you have any other questions. Ping me on Instagram - akaman1992
I did this experiment today for my Himalayan ... Fingers crossed... I don't know how this work ... But i felt its trickey for the tyre to install with the tube and ensure tube part is out during tyre installation. The tyre installer put lot of effort to install the tyre
Yeah bro, it’s tricky but worth it. I am using this now for more than 5 months without any problem. Also have done two long trips and luckily no issues as such.
@@srikantajagadeesh Since installation till now no any puncture happened bro. I believe it will be normal tubeless puncture kit, unless a very long nail or something puncture and hits the inner tube. That is very less likely to happen.
@@tndvlogs5419 Haan bro dono tyre ka kia hai maine. Sealant lagane ki jarurat nahi, mai 1 saal se use kar raha hu koi dikkat nahi hui abhi tak. Aur ye wala method sasta bhi hai to try karne me koi dikkat nahi hai, bas thodi mehnat hai ek baar try kar sakte hai, 500 Rs me ho jaega.
hey bro a small question,i havent bought this bike but i am planning to buy this bike in second hand hopefully very soon,for me the seating of the gt feels very stylish and also the atractive ness or the crowd pull atraction and also the feel to own an re.so the question is,is it possible to have a dual seat setup with removable cowl like in gt650 on the gt535? since i havent bought the bike,i have no idea about it but the thing is that the cowl gives a different look the bike as a whole so it would be nice when going on solo driving rides but we will be able to remove the cowl when we want to take a pillion along with us,if you have any idea please let me know,make a video on it please.
Hi Lord, first of all please go ahead and buy this bike and try to find a bike with good condition. You will wanna keep this bike forever. Now coming to seat question yes you are right, there are actually two options: 1. Single seat 2. Dual seat And you can put the cowl on the dual seat, it is just a couple of nuts that's it and hardly takes 2-3 minutes to remove or install the cowl. Also if you just want to swap the seat it's a wire like lever just pull it and you can swap the seat. I have a cowl which I used to use while I was single. Now it just sits in my garage. If you want I can sell it to you that in future. If you have any more questions feel free to ping me on instagram - akaman1992 Please subscribe to my channel.
It’s been 9 months since this experiment. Holding beautifully without any issue. This method has been widely used in the west for dirt bikes. So it’s completely safe in my video. I have done two Kolkata Darjeeling trip since this setup. 800km one way, and didn’t gave any issue.
@@cgt5353 nahi bhai mein hyd mein rahta hoon, idar 4 way roads hein toll wala, over taking ke liye 120 se bhi upr jana padta hein. Mein bhi 90kmph mein hi max cruise kar ta hoon. Lekin jyada speed jaane se kya tyre stable hone ka doubt tha is liye pucha. Way2speed wala conversation hyd mejn nahi hein, mumbai noida mein log hein. Mereko aapka tadika aasan laga
@@waghdharepratik Not yet bro, but i have done 3 trips of 1500 Km each since August have put it. No issues till now. Only once air was leaking from the nozzle of front tyre. Just went to puncture shop and for 10 Rs changed the valvepin of nozzle and i was good.
Wo nahi hilega, kyunki humne 16 inch ka tube chadhaya hai 18 inch k rim par. Pura tightly packet hai wo. Maine ab tak 8k KM pura kar lia bina koi issue k.
Feedback- So guys it,s been 6 months now I am using this setup with no issue at all and completed 6000 plus km till now after the setup. It holding beautifully no any major or minor issues I have face.
Can you make a long term video in it
@@phanibapanapally4049 Bro installation video I can’t make make removing tyres all over again is big task. But i cam connect with you if you have any other questions. Ping me on Instagram - akaman1992
Did you convert your rear as well? How is it holding up if you have converted?
@@pushpaksharma2078 Yes
Sooper solution! Such a great way to make a wheel tubeless
What a idea 💡 phele kyu ni mila aaj me sealant kharidkkee lekkr aaya
Koi baat nahi Bhai sealent de do uske baad tube laga do
Very good, would be eagerly waiting for the test results.
Yes bro, since morning not even single PSI has been dropped I rode the bike around 12-15 Km as well.
Sir, It will work, I have done for my interceptor 650, and have done 5k kms with 3 three tubeless repair plug.
Thank you so much brother for the feedback, yeah it's been one month and working for me as well so nicely.
very good sir
side jo tube bahar aaya hai use mat katiye
Mai kaat kar 7-8 month se chala raha hu koi issue nahi ho raha.
Very good job 👍
THANKS BRO
I did this experiment today for my Himalayan ... Fingers crossed... I don't know how this work ... But i felt its trickey for the tyre to install with the tube and ensure tube part is out during tyre installation. The tyre installer put lot of effort to install the tyre
Yeah bro, it’s tricky but worth it. I am using this now for more than 5 months without any problem. Also have done two long trips and luckily no issues as such.
Did had any puncture... During this course time ...if yes was it normal tubless puncture kit works for it ? Pls let me know
@@srikantajagadeesh Since installation till now no any puncture happened bro. I believe it will be normal tubeless puncture kit, unless a very long nail or something puncture and hits the inner tube. That is very less likely to happen.
@@cgt5353 ... Thanks a lot for your inputs ... Had you put some tyre guard sealent just in case a puncture happens ?
@@srikantajagadeesh no bro not needed, the tube itself will do that work. Nothing extra
Kal hi krwata hu ye kaam rear wheel me
Thoda mehnat hoga but worth hai bhai. Mera 4 month se upar ho gaya, 5 thousand KM kar lia. Still koi issue nahi.
Good content always 👍
Thanks brother.
Tube ka valve kaat diya ya fir usi ko use kiya hai bro
valve nahi kaata, uska valve hi use kia.
@@cgt5353 sir front aur rear dono ka kiya hai aapne?? Sealant lagake ye wala method try kar sakte hai kya
@@tndvlogs5419 Haan bro dono tyre ka kia hai maine. Sealant lagane ki jarurat nahi, mai 1 saal se use kar raha hu koi dikkat nahi hui abhi tak. Aur ye wala method sasta bhi hai to try karne me koi dikkat nahi hai, bas thodi mehnat hai ek baar try kar sakte hai, 500 Rs me ho jaega.
@@cgt5353 sir aur ek baat puchni thi. 19 inch wheel ke liya kitne inch ka tube chahiye hoga? 16 inch ya fir usse jyada
@@tndvlogs5419 16 inch ho jaega, aur 16 inch aur bhi acha hai tight se fit hoga. But make sure ki tyre tubeless wala use kare
great video...👍👍👍
Thanks bro
I didn't understand the part about nozzle. Did you fit the same nozzle that came with the tube? Or did you buy a separate tubeless nozzle?
It's like putting a normal tube then slicing it from the middle. Nothing different no separate nozzle
Thanks for the reply man. Did you do the same for rear tyre as well?
@@mudit1939 yes bro done the same for rear as well.
hey bro a small question,i havent bought this bike but i am planning to buy this bike in second hand hopefully very soon,for me the seating of the gt feels very stylish and also the atractive ness or the crowd pull atraction and also the feel to own an re.so the question is,is it possible to have a dual seat setup with removable cowl like in gt650 on the gt535? since i havent bought the bike,i have no idea about it but the thing is that the cowl gives a different look the bike as a whole so it would be nice when going on solo driving rides but we will be able to remove the cowl when we want to take a pillion along with us,if you have any idea please let me know,make a video on it please.
Hi Lord, first of all please go ahead and buy this bike and try to find a bike with good condition. You will wanna keep this bike forever.
Now coming to seat question yes you are right, there are actually two options:
1. Single seat
2. Dual seat
And you can put the cowl on the dual seat, it is just a couple of nuts that's it and hardly takes 2-3 minutes to remove or install the cowl.
Also if you just want to swap the seat it's a wire like lever just pull it and you can swap the seat.
I have a cowl which I used to use while I was single. Now it just sits in my garage. If you want I can sell it to you that in future.
If you have any more questions feel free to ping me on instagram - akaman1992
Please subscribe to my channel.
Like it
Tube rubber being soft will worn out easily due to movement of rim on bumps.
Tube is soft but have too much tensile strength and it’s still holding for me for last 2 years.
Little update, this method is perfect for me in 150kmph, it will be easy if we apply oil to tyre beedings, so they easily slide and settle into tube.
Thanks bro the update, i am glad to know it’s benefiting you guys
@@cgt5353 amaan bhai, all credits go to you. But badly need one full uncut video showing how we can fit tyre,
@@phanibapanapally4049 Ofcourse bro, next tyre change i will make it fully uncut video
Bhai 16 inch tube ka koi dimensions hein kya? Shop mein puchne ke liye thoda information chahiye
Nahi nahi koi bhi 16 inch tube se ho jaega. Kyunki jaise hi usko beech me se faadoge. Wo enough wide ho jaega pura rim cover karne k lie.
tyre change krte time fir yahi purana andar ka tube kaise lagayenge, tube to side se cut kya hein
pls reply degeya
But ye tube ke nichhe sealant lgaa de toh tube apni jagah fix ho jayegi permanent
Kar sakte ho but islie maine chota size ka tube ka lie hai. Jisse wo tightly baith jae rim par. Sealent ki jarurat nahi hai.
What is the update on this experiment so far, did you do it for rear and front both tyres ?
and at high side did you find it safe ?
It’s been 9 months since this experiment. Holding beautifully without any issue. This method has been widely used in the west for dirt bikes. So it’s completely safe in my video.
I have done two Kolkata Darjeeling trip since this setup. 800km one way, and didn’t gave any issue.
@@cgt5353 in case of puncture which method you used norma tyre tube puncture or tubeless method
@@gurjeetsingh-qu3og ping me on Instagram - akaman92
Bhai 120kmph or above speeds mein problem a rahi hein kya? Mein try karna chahta hoon
Bhai 120 and above kaun chalata hai ye bike. Maine 110 tak test kia hai. 90-100 par lagatar cruise bhi kia hai. No issues.
@@cgt5353 nahi bhai mein hyd mein rahta hoon, idar 4 way roads hein toll wala, over taking ke liye 120 se bhi upr jana padta hein. Mein bhi 90kmph mein hi max cruise kar ta hoon. Lekin jyada speed jaane se kya tyre stable hone ka doubt tha is liye pucha. Way2speed wala conversation hyd mejn nahi hein, mumbai noida mein log hein. Mereko aapka tadika aasan laga
@@cgt5353 bhai stock ceat or ralco se aur koi front tyre hein kya interceptor ke liye budget mein?
@@phanibapanapally4049 9874751158 call me
Wondering if I can pull this off on my 411 Himalayan!
It will work bro, i am still using and it’s been 2 years
Classic 350 front & rear wheel me kitne inch ka tube lagana hai?
17 inch
Did you ever faced puncture issue after this installation?
@@waghdharepratik Not yet bro, but i have done 3 trips of 1500 Km each since August have put it. No issues till now. Only once air was leaking from the nozzle of front tyre. Just went to puncture shop and for 10 Rs changed the valvepin of nozzle and i was good.
Dada mera scram411 hai from kolkata behala... Best location bol dijiye tyre shop kaha se kar sakte hai?
Scram me Ceat ka tyre acha hota hai. Ceat ka showroom aapke aas pass mil
Jaega to.
Tubeless ho jayga
@@soumodiprakshit4000 Haan ye wala method use karo ho jaega, but tubeless tyre lena
Kolkata mai kon shop bol dijiye please
HOW IS IT HOLDING UP NOW? IM PLANNIGN TO DO IN MINE.
It's Holding brilliantly. Did 1600 km (Kolkata to Darjeeling and back) in 4 days cruising 90-100KMPH. Coming back to kolkata just 2 psi reduced.
@@cgt5353 ok but would it be losing any psi when standstill?
@@Prathyush2010 No bro, it's been Approx a month and I am not facing such issue.
Which tubeless tyre you had using
MRF nylon grip zapper
How much PSI you are keeping on your front and rear tyre now ??
Depends on preference bro, I keep 34 Psi rear and 30 psi front. For someone this might be too high but again I like it according to my body weight
Sir G kaisa chalra hai abhi?
Ek dum mast chal raha bhai koi issue. Successful hai ekdum
Bro have you changed your tyre
Yes, put tubeless tyre
Bro can we again use same tube
Yes
Is it still holding up?
Steady and healthy like a bull. This method is being used in dirt bike in foreign countries.
@@cgt5353 Thanks a lot! Will try this on my xpulse.
It's been 3 months please give long term review of this experiment elder brother
Bro I am not making Videos as of now, but as you said it's been 3 months and still running without air leak or any problem. It's a big success
@@cgt5353 Thanx brother
nozle kya tubeless wala chahiye ??
Nahi jo tube wala nozzele hai usi se ho jaega
Does this work?
6000 plus km and still running without any issue.
Can we put tubeless chemical in it?
It will be of no use….
@@cgt5353 why sir😓
@@BeastPramodYT I mean you can use but it’s just waste of money, my method i am using since 1 year now.
@@cgt5353 ok sir. Can we use stock tube tyre in it? Does it will make any difference?
@@BeastPramodYT No you meed small size tube 16 inch or 17 inch. So that it will be tight on the rim
Aur agar puncture hua toh andhar Jo tube hai vo toh hil jayega
Wo nahi hilega, kyunki humne 16 inch ka tube chadhaya hai 18 inch k rim par. Pura tightly packet hai wo. Maine ab tak 8k KM pura kar lia bina koi issue k.
@@cgt5353bhai 16inch tube konsa गाड़ी का है
@@varunmandawara1461 Ye to pata nahi bhai kaunsi gaadi ka, maine 16 ya 17 inch ka tube managa Dukan me usne de dia. 17inch bhi chalega
Bro that tube is re useable
Yes
Really your jugard legend
Bro size of tube
@@yeshreddy4559 Any smaller size than stock rim. I have use 16inch tube
@@yeshreddy4559 Thanks bro