I been subscribed to your channel for a few years. Love your videos. I have done lots of machining and fabrication myself for a living. I built have built magnesium guitars and many knives. I am mostly retired now doing little things to help others. I find your videos very relaxing . The music is perfect.
Thank you for watching. Thank you for your comment. This is because the frequency of handling machines has decreased. I used to be a machinist, but I quit seven years ago and now I mainly run a used car parts dealer.
Thank you for watching. This tool is hss. We call it a hill finish tool. It is used when sharpening the cutting edge as flat and sharp as possible to finish at low rotation. Since the rotation speed is low, a mobile steady rest can be used to process even longer materials without vibration.
Beautiful job, but header somewhat misleading because those special holders need to be made and one require milling machine to do so. Therefore question is - if you have milling machine would it be easier to cut square directly on it?
podrias enseñar a hacer porta insertos para torno, al menos los mas utilizados, es que los precios en mi país (Colombia) son muy elevados y en china son económicos pero el envio hace que sea un lujo adquirirlos, gracias, un saludo
Thank you for watching. It is a scene where the color becomes darker by applying Vaseline, but this is not a chemical change due to the components of Vaseline, but simply because the surface gets wet. Vaseline was applied to enhance the rust preventive effect.
Я ВСЕГДА изготавливал ключи к патрону из стали - 38ХС и Калил в масле . Такой ключ потом не отпускал , т.к. у этой стали коэффициент износоустойчивости - 286 кажется . Из этой стали делают пальцы соединения траков гусениц у танков . Так вот за 38 лет , поменял всего 3 ключа !! Ключи - вечные !! КАРАМБА !!!
Thank you for watching. Since it is a high-speed steel finishing tool, it is not glossy, but it is smooth. Tempering was performed with a torch to strengthen the hardened part.
Thank you for watching. High-speed tool steel blade for finishing. It is sharper than a normal cermet tip, so you can fine-tune the diameter. 9:00 The material is thin and long, and even if it vibrates with a normal insert, there is almost no vibration or bending with this blade, and it can be processed at low rotation and high speed feed.
Hola, muchas felicidades, excelentes trabajos, soy admirador de tus proyectos, Te tengo una pregunta, Después de calentar el metal con el soplete, se pone negro, ya frío le pones el white petrolatum? Y con eso ya no se oxida? Eso es pavonarlo? Gracias
Gracias por ver. sí. Después de que se enfrió, apliqué vaselina. El óxido es un poco menos probable que se oxide. Este nivel de óxido negro delgado no tiene un efecto preventivo de óxido muy fuerte.
Это перфекционизм за гранью разумного. Сразу видно, что человек не занят реальным производством. Качество качеством, а работать надо чуть быстрей одноногого инвалида. А уж японцы в производительности понимают.
При всём уважении к труду токаря, я бы не рекомендовал использование 45й стали, у уж закалка горелкой на воду просто жесть! Надо взять хорошую, среднелегированную сталь типа 38Х2Н2МЮА, которая в состоянии поставки проката обеспечит ключу необходимые мех.требования. Был случай, когда я буквально улетел в момент поломки ключа из 45й стали. После этого сделал ключ из вышеназванной стали, и работаю им более 25 лет, при этом нет ни малейших деформаций в сечении квадрата.
Я просто сделал ключ из вт8. По краям ручки радиусна большего диаметра чем сама ручка. Ручка двигается влева вправо и поджимает её шарик с пружинкой, которые вставлины с торца ключа и зафиксированы болтиком с потаем. На ручке сделаны бороздки, где мне удобно, чтоб фиксировать положение ручки шариком. А здесь видео не перфекцианизм, а просто видео, где хоть что нибудь, чтоб выложить видео. Человек не умеет работать, а только научился точить. Я токорь СПУ, стаж 13 лет. Т. е. не диванный эксперт. Челочек чем-то занят уже хорошо. Так держать автор.
Thank you for watching. It's a finishing tool. Since almost no force is applied in the direction in which the material bends, it is used for finishing thin and long objects.
Thank you for watching. Since this processing does not apply weight in the bending direction of the material, the diameter can be made even for thin and long objects.
Great work sir!! Machinist "style" as it should be. I have two questions if you do non mind answering: 1. how are your hands so clean? 2. what is the brand and model of the trigon carbide insert you use for final cut when facing? Kind regards from Athens, Greece.
Thank you for watching. 1. I changed from a machine repair shop to a used car parts dealer 6 years ago, so I hardly touched the machine. Swap lamp is the shop name of a used car parts dealer. 2. The throw-away tip used for finishing is Sumitomo's T1500A.
Here is a very "ignorant" question. What is the purpose of using that flat tool at minute 9:00? You used it previous to this as well. Is that a finish tool? You have finished the piece with the previous tool! Why go through that extra step? I've worked many years on these machines and never had to do that when you can do the finish pass with the same tool.
Thanks for watching. This blade has almost no load in the bending direction and can finish a smooth surface. Use when the shaft is long or thin, or when precision is required. In Japan, anyone who uses a general-purpose lathe uses it, so I thought it was common. It is called "Healthia Gebite" in Japanese.
Thank you for watching. Black metal is a by-product of tempering. Even though it is thin, stable black rust covers the steel, so it has a slight rust preventive effect.
My respect to you for the incredible work you do. Definitely worth a subscription. My question is did you really needed to hardened that key?! I don’t think that it will face some serious force. Looking for your upcoming epic videos
Thank you for watching. I bought this chuck second hand last month, but it didn't come with a chuck key. The surface is beautiful due to lathe processing, but it is a fairly old chuck. You can see it by looking closely at the chuck jaw.
Mi scusi. Da circa 2:40 in questo video, abbiamo toccato M12 su acciaio inossidabile. L'avanzamento del taglio del filo viene impostato e il mandrino viene ruotato manualmente per evitare che il passo si sposti. ruclips.net/video/7V5moM5JCnY/видео.html
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
技術も凄いけど、旋盤がいつも綺麗なのが素晴らしい！
دك
5Sの行き届いた職場ですね。
今日も一日、「「「ご安全に！」」」
0Somos tudo 912áá11ws823aeuaaeyaye6y6yyyüp66üwáwe330ù11wwww33e33puqwpypply67l1wpi.m07ylylypiu77uuuúiuuyu,jjhhhu77u7ppp0
@@mezianiibrahim3382 9
最初ハンドル部分の微妙なテーパで入らないじゃん！
って思ってたけど…
金属膨張を利用して止めるのか…
焼入れと焼きなましで強度を強めてるのもまたいいですね！
旋盤以外にも全てにおいて参考になります！笑笑
Every machinist has made a chuck key. Few have made it into a work of art! Congratulations on this.
Completely agree :-)
An accurate statement!
9:00 can you please tell me why he is doing that?
@@megu9030 Smooth finish.
@@JoseSilveira-newhandleforYT For a good surface, I would use a carbide insert and a high rpm. He got both so why dont use them?
I been subscribed to your channel for a few years. Love your videos. I have done lots of machining and fabrication myself for a living. I built have built magnesium guitars and many knives. I am mostly retired now doing little things to help others. I find your videos very relaxing . The music is perfect.
あなたは本当のマスターです。 丁重に。
素晴らしい！作業が丁寧でとても綺麗ですね。私も加工してますがとても勉強になります。
The machine and tools cleaness as well the work quality are admirable.
In addition to the fantastic skill displayed in these videos this must be the cleanest machine shop I have ever seen.
いつもすごい技術を見せてくださってありがとうございます
憧れます
前回の動画で作った道具も活躍してますね
黒いチャックハンドルもカッコいい～！
バイトでバリ取り
良いですね
目から鱗でした
Очень красиво! С такой подачей материала и проделанной работы, стоило ключ отполировать ))). Всё сделано на высшем уровне. Спасибо! 👍
Not only are your projects beautifully done but the video production also.
旋盤本体やチャック、片爪が綺麗だ。
旋盤って治具さえ考えりゃ色々使えるんやな。
mother machine
と言われるぐらいだからね
Красивым инструментом и работа в радость! Отлично сделано. И музыка не напрягает.
中でも差込角の製作法が参考になりました！
いつも興味深く拝見させてもらっています。
いい仕上がりですね！ぜひ自分も作ってみようと思います。
ヘール加工、今どきしたことがない人が増えてしまいました。
どころか、手研ぎのバイトを作れない人が増えて…
危機感を持っています。
Amazing surface quality on this ugly 45C!
Nice job!!!
Nicest chuck key on RUclips for sure, nicely done.
Beautiful work! The only thing i don’t understand how a machinist have clean smooth hands like yours?
Thank you for watching.
Thank you for your comment.
This is because the frequency of handling machines has decreased.
I used to be a machinist, but I quit seven years ago and now I mainly run a used car parts dealer.
I tell you again, this is an alien worker, because of his accuracy.And again, respect from Bucharest, Romania !
Krásná a odborná práce. Beautiful and professional work. 美しくプロフェッショナルな作品。
I knew I was going to enjoy this before I watched it. Thank you for sharing.
Großartige Arbeit! Und ausgeklugelte ideen! 👍
The tool used at 3:33 is that HSS? What is nome of that grind? Sorry for the silly questions I'm still learning
Thank you for watching.
This tool is hss.
We call it a hill finish tool.
It is used when sharpening the cutting edge as flat and sharp as possible to finish at low rotation.
Since the rotation speed is low, a mobile steady rest can be used to process even longer materials without vibration.
Greetings from Canada! Love your work. You continue to impress and captivate.
Very nice work on the blueing. Another interesting video, thank you
Beautiful job, but header somewhat misleading because those special holders need to be made and one require milling machine to do so. Therefore question is - if you have milling machine would it be easier to cut square directly on it?
Thank you for watching.
That's right. This holder was made with a milling machine.
It is easier to processwith a milling machine.
podrias enseñar a hacer porta insertos para torno, al menos los mas utilizados, es que los precios en mi país (Colombia) son muy elevados y en china son económicos pero el envio hace que sea un lujo adquirirlos, gracias, un saludo
Estoy igual
Very very nice tool you have made, the flat form tool just looks like its asking for trouble - although it did seem to work for you
Истинное наслаждение.
Благодарю.
I didnt know you could use seaweed as a buffing pad!?! Man, you are good!
Nice and clean work. Well done
Thanks for share your impressive work. Can you explain a little bit about bluing with white petrolatum?
Thank you for watching.
It is a scene where the color becomes darker by applying Vaseline, but this is not a chemical change due to the components of Vaseline, but simply because the surface gets wet.
Vaseline was applied to enhance the rust preventive effect.
Я ВСЕГДА изготавливал ключи к патрону из стали - 38ХС и Калил в масле . Такой ключ потом не отпускал , т.к. у этой стали коэффициент износоустойчивости - 286 кажется . Из этой стали делают пальцы соединения траков гусениц у танков .
Так вот за 38 лет , поменял всего 3 ключа !!
Ключи - вечные !!
КАРАМБА !!!
What's the tool at 9:20 being used for? It ruined the finish! Did it not?
And what's the purpose of the torching at 16:00?
Thank you for watching.
Since it is a high-speed steel finishing tool, it is not glossy, but it is smooth.
Tempering was performed with a torch to strengthen the hardened part.
@@SwaplampJapan
Thanks for reply.
Like your style man 👍 great job
組み上がって最後（何故炙る❔）……
なるほど ワセリンで化粧されたんやな。
使い古しの工具の イメチェンの参考に致します :D
3:32 Masters, what is that tool and why are you using it instead of a normal one?
Thank you for watching.
High-speed tool steel blade for finishing.
It is sharper than a normal cermet tip, so you can fine-tune the diameter.
9:00 The material is thin and long, and even if it vibrates with a normal insert, there is almost no vibration or bending with this blade, and it can be processed at low rotation and high speed feed.
@@SwaplampJapan just what I thought. Amazing vid man, your problem solving skills are commendable!
Love the black finish on the key. Do you not have a mill?
Hola, muchas felicidades, excelentes trabajos, soy admirador de tus proyectos,
Te tengo una pregunta,
Después de calentar el metal con el soplete, se pone negro, ya frío le pones el white petrolatum?
Y con eso ya no se oxida?
Eso es pavonarlo?
Gracias
Gracias por ver.
sí. Después de que se enfrió, apliqué vaselina.
El óxido es un poco menos probable que se oxide.
Este nivel de óxido negro delgado no tiene un efecto preventivo de óxido muy fuerte.
ハンドルなんか適当に穴開けて丸棒そのまま溶接すればええやん！って思って見てたけど、最後まで見て納得
Это перфекционизм за гранью разумного. Сразу видно, что человек не занят реальным производством. Качество качеством, а работать надо чуть быстрей одноногого инвалида. А уж японцы в производительности понимают.
При всём уважении к труду токаря, я бы не рекомендовал использование 45й стали, у уж закалка горелкой на воду просто жесть! Надо взять хорошую, среднелегированную сталь типа 38Х2Н2МЮА, которая в состоянии поставки проката обеспечит ключу необходимые мех.требования. Был случай, когда я буквально улетел в момент поломки ключа из 45й стали. После этого сделал ключ из вышеназванной стали, и работаю им более 25 лет, при этом нет ни малейших деформаций в сечении квадрата.
Совершенно верно можно улететь, я тоже себе сделал ключ из 45 Сали и закалил горелкой но вставил стержень из ст.3 .
Я просто сделал ключ из вт8. По краям ручки радиусна большего диаметра чем сама ручка. Ручка двигается влева вправо и поджимает её шарик с пружинкой, которые вставлины с торца ключа и зафиксированы болтиком с потаем. На ручке сделаны бороздки, где мне удобно, чтоб фиксировать положение ручки шариком.
А здесь видео не перфекцианизм, а просто видео, где хоть что нибудь, чтоб выложить видео. Человек не умеет работать, а только научился точить.
Я токорь СПУ, стаж 13 лет. Т. е. не диванный эксперт.
Челочек чем-то занят уже хорошо. Так держать автор.
excelente trabajo y dedicación.
saludos from Chile
What was the reason to use a flat turning tool ? I’ve never seen that before ?
Thank you for watching.
It's a finishing tool.
Since almost no force is applied in the direction in which the material bends, it is used for finishing thin and long objects.
👍Nice and clean job🙏anybody please tell me the name of holder in which job is tightened then in Chuck
Thank you for watching.
The holder grabbed by the chuck is the Nikken straight collet.
Uch kulachokli tokirlik patronni uchun kuluch yaxshimi yoki biroz uzun emasmi-?
Tomosha qilganingiz uchun rahmat.
Kechirasiz. Men Google Translate-dan foydalandim, lekin nima yozganingizni tushunmadim.
Exelente trabajo amigo se requiere mucha paciencia saludos de Torreón coahuila mexico 👍🏾👍🏾👍🏾
9:00 why is he doing that? I've been working on lathes for two years now, but I've never seen anything like it.
He is doing so many strange useless things that just make no sense
I think he's autofeed is broken so utilizing leadscrew is a very good idea
Thank you for watching.
Since this processing does not apply weight in the bending direction of the material, the diameter can be made even for thin and long objects.
Nice! Why do you use that wide parting-blade-looking tool for your finish cuts?
Thank you for watching.
This cutting tool is suitable for finishing as no load is applied in the bending direction of the material.
Great work sir!! Machinist "style" as it should be.
I have two questions if you do non mind answering:
1. how are your hands so clean?
2. what is the brand and model of the trigon carbide insert you use for final cut when facing?
Kind regards from Athens, Greece.
Thank you for watching.
1. I changed from a machine repair shop to a used car parts dealer 6 years ago, so I hardly touched the machine. Swap lamp is the shop name of a used car parts dealer.
2. The throw-away tip used for finishing is Sumitomo's T1500A.
This is machining "asian level". This is skill at the top.
Here is a very "ignorant" question. What is the purpose of using that flat tool at minute 9:00? You used it previous to this as well. Is that a finish tool? You have finished the piece with the previous tool! Why go through that extra step? I've worked many years on these machines and never had to do that when you can do the finish pass with the same tool.
Thanks for watching.
This blade has almost no load in the bending direction and can finish a smooth surface.
Use when the shaft is long or thin, or when precision is required. In Japan, anyone who uses a general-purpose lathe uses it, so I thought it was common.
It is called "Healthia Gebite" in Japanese.
Молодец, отличная работа!
With respect to the end, what to leave the black metal, serves with any type of steel? some recommendation to do it
and by the way very good video, look forward to more jobs like that
Thank you for watching.
Black metal is a by-product of tempering.
Even though it is thin, stable black rust covers the steel, so it has a slight rust preventive effect.
真剣バイトで面取りを
終える時、バイトは斜め
つまり面取り面に平行に
逃さないと、返りが出ま
せんかね？
私は特級技能士に、面取り
はヘールでやって斜めに引
けと言われました。
Great job! What rpm did you use for the finishing @ 9:00 min?
Thank you for watching.
It is 83 rpm.
The feed is 4mm / rev.
Awesome work sir... Thanks for sharing ❤️❤️❤️❤️❤️
awesome, awesome work 😁👌👍
Very Nice & clean work
Excellent work! It turned out so beautiful that it's a shame to use it - should be on display instead :-)
将日常变为艺术，很棒的视频。
Turn everyday into art, great video.
動画の制作が優れています。精選して作ったビデオに感謝します。機械加工技術に対してより一層の経験をさせていただきました。
政治的基準のせいで、中国大陸のインターネットは世界システムから独立しています。中国大陸のネットユーザーは多くの海外サイトを訪問することができません。
このビデオを中国大陸に持ち帰って、学校の学生の教材にしたいです。
视频制作优良，感谢师傅精选制作的录像，让我们对机械加工工艺有了更进一步的经验。
因政治标准的原因，中国大陆的互联网是独立于世界体系的，中国大陆网民无法访问多数国外网站。
我希望将这段录像，带回中国大陆，作为学校学生的教学材料。
感谢收看
该视频帖子旨在娱乐世界各地的人们。
未经允许，我们不允许您在任何国家/地区将其复制和用于商业目的，但可以将其复制并用于学校教育。
@@SwaplampJapan かしこまりました。返信ありがとうございます。
知晓了。十分感谢你的回信。
12:21 ¿esa cuchilla para que se usa?; lo veo, pero no sé como decirle. 😅
Gracias por ver.
Un cuchillo para biselar redondo.
続けて書き込み失礼いたします
手作りの バイトは特に懐かしいです
自動機の機械を使っていたので R のバイトとか商品の形に研いだバイト とかなつかしいです
NC で Rに 加工したら サイクルタイムがかかりすぎるし
45Cぐらいまでなら手作りバイトの方が私は好きです
My respect to you for the incredible work you do. Definitely worth a subscription. My question is did you really needed to hardened that key?! I don’t think that it will face some serious force.
Looking for your upcoming epic videos
Felicitaciones !
Yes because the lathe chuck is hard..
As always lovely and perfect job in any of it. Be blessed
旋盤+チャックハンドルといえば、高専時代につけたまま旋盤起動して吹っ飛ばした覚えがあるな、先輩は屋根に穴開けたって言ってたし。
Excellent job! Congrats.
Your videos are mesmerizing to watch my dude
Always love your videos
Aparte de ser muy hábil, pulcro y tener excelentes herramientas, ud es un artista, felicitaciones desde Colombia
Great work!
Great job
What model number of collect
When you spend all your money on a lathe, and literally can't afford any other equipment.
きれいな作業。先端焼き入れのとき、冷めるまでちょっと置いといてから水冷する理由はなんでしょうか？
ご視聴いただきありがとうございます。
S45Cの適正焼入温度範囲は820～870℃ですので、その程度に冷めるまで待っています。
動画なので正確な色味がわかりにくいのですが、加熱部の発光にオレンジの色味が残っている状態(900℃以上)で水冷すると、焼き割れといって亀裂が入ってしまい使い物にならなくなることがあります。
焼き割れ防止の為に少し冷ましてから水冷しました。
Perfect work! Excellent! 👍
Beautiful work.
Excelente trabalho. Saudações desde Portugal
Thermal coloring is awesome ,
That was beautifully made! 💪😀
How does the petroleum jelly color the metal?
Thanks for watching.
Even if you use other oils instead of white petrolatum, it will glow black.
Заготовка надеюсь из японской стали, или засилье китайского рынка коснулось и вас? И пруток изготовлен в Ухани?
What kind of cutting fluid are you using?
Thank you for watching.
I'm using Castrol's Variocut C210
とても美しい😊
Tôi rất thích xem cách làm việc của người nhật đặc biệt là môi trường làm việc rất sạch sẽ.
Que líquido usa para templar el material?
Gracias por ver.
Usé agua del grifo.
ワセリンを塗ったらもっと色が濃くなったんですが、ワセリンで金属の着色ができるんですかね？ それとも防錆のため？
ご視聴いただきありがとうございます。
青焼きした部分に防錆の為に塗り込みました。
着色したようにも見えますが、ワセリンにそのような作用はなく濡れた事で光の乱反射が減って色が濃く見えています。
他の油でも同様の現象が起こりますが扱い易いので私はワセリンを使用しています。
@@SwaplampJapan
ご回答ありがとうございます。色々参考になります。
謝謝敎學。希望看你的車刀磨削敎學！(こんにちは、回転テーブルカッターの研削についてのビデオを作ることができますか？)
感謝收看
請稍等，因為需要進行準備才能製作易於觀看的視頻。
而且我的切削工具的磨削技能很低，所以不要指望它。
@@SwaplampJapan 好的。期待中！謝謝！
Why was a flat cutter used for grooving? what's the idea?
What's happened to the old key?😁
Thank you for watching.
I bought this chuck second hand last month, but it didn't come with a chuck key.
The surface is beautiful due to lathe processing, but it is a fairly old chuck.
You can see it by looking closely at the chuck jaw.
@@SwaplampJapan i live in Italy but i like the japanese atmosphere, Japanese quality.. nice channel, friend.
Thank you. I am very happy.
I like Italian design and food.
friend.
@@SwaplampJapanwhen you feel like it, feel free to visit me on my channel, bye bro
perfect work !
Hai dei video sull esecuzione di una maschiatura al tornio ?
Grazie per aver guardato. Non ho pubblicato un video di intercettazione.
@@SwaplampJapan in futuro..?speriamo..
Mi scusi.
Da circa 2:40 in questo video, abbiamo toccato M12 su acciaio inossidabile.
L'avanzamento del taglio del filo viene impostato e il mandrino viene ruotato manualmente per evitare che il passo si sposti.
ruclips.net/video/7V5moM5JCnY/видео.html
メカニックについてはよくわかりませんが、上手くやっていると思います
Excellent impression
Such an effectively technical performance!
Great Work, very impressiv.
I enjoyed watching.