Top 3 brilliant metal turning ideas you've never seen before
HTML-код
- Опубликовано: 10 сен 2024
- Top 3 brilliant metal turning ideas you've never seen before !!!
==================================
Good afternoon, friends!!!
My name is Sergey, I am the author of Cool Ideas DIY channel. On this channel I present everything that I made with my own hands at home. Creative ideas, useful tips, homemade tools and inventions. Welcome to my channel - Cool Ideas DIY!
✅Enjoy watching! Don't forget to subscribe, like, and turn on the bell🔔
==================================
🔥Homemade
🔥DIY
🔥Creative ideas
🔥Make in home
🔥Life hacks
🔥Crafts
🔥Inventions and tools
🔥Usefull and Helpful ideas
🔥Tips and tricks
🔥Welding
🔥Turning work on a lathe
🔥Metal workshop ideas
🔥Making tools from metal
🔥Unique tools that you must have
🔥Waste metal craft ideas
==================================
#Cool #Craft #Diy #Homemade #Welding #Amazing #Ideas
💗Thanks for watching, LIKE, Subscribe & Share!
Good videos. You have a nice workshop, good machines and always very clean. Thank you.
Thank you my friend and welcome🙏
Why do all these guys take a piece out of the mill vise and put it in a shop vise to tap a hole? Makes no sense to me. But hey! I’m just a 72 yr. Old machinist with over 50 years experience. 😊 I can’t believe he put that rusty tapered shank in that nice tailstock spindle. That’s a drill chuck not a mill chuck. 😮
Because he is a hacker not a machinist.
Most people these days do NOT understand machining processes. They are mostly hacks.
Did you see the drill wobble at 0:50 ? and he continues on as if it's normal and then at the END he uses a center drill .🤣
Good grief the centre drill is the starting drill not the champher on the wobbly hole after the fact.😵💫🇦🇺🐈⬛😎
I am a similar vintage machinist as you, and also can't believe.....................literally every tool is used incorrectly in these "brilliant ideas"! When I was an apprentice, I would have gotten a size 10 in the ass for all of these practices. Shame that he is teaching others his skill set...............
You don't like using a center drill before you drill a hole, do you. ??
My god, that runout on the drilling was historic!
Still no soft jaws for your engineers vyce I see😢. Shame too always be damaging machined surfaces in this way!
Welcome my friend!
That magnet isn't true, and neither is the piece you put in the chuck. It's wobbling when you start the lathe. Also, that hole in the magnet tool being off center is hella annoying.
The magnet was lower than the rim. I hope.
Been doing this for decades, don't need a "special tool ", just the tail stock and a taper sleeve
Spotless lathe?. Probably spends more time cleaning than turning.
Don't be negative mate , give the guy a go .
@@mikemoore5929 Not commenting on the work, just how clean.
Confucius say: "Beware of man who give himself thumbs up."
Welcome!
🤡👍
👏👏👏
A pleasure to watch!
Simple and doable ideas for many enthusiasts.
Congratulations for your videos: really useful and interesting. For a novice like me it would be useful to know the spindle speeds set for the different types of machining. Thank you
Happy the ones that are thinking they are the only one that knows.
Until they find out otherwise.
Hola amigo , te felicito por esta genial idea y te doy las gracias por compartirla , tienes todo mi respeto , un saludo desde Islas Canarias !!!!! , también quiero felicitarte por la limpieza y las maquinas que tienes .
Thank you very much my friend and welcome👍🤝🙏
Good ideas.
Wow!!!
Welcome my friend!
Me encanta el taller, todo ordenado y limpio
And no work gets done.
WOw, amAzING, you invented a fly cutter. Better patent your idea b4 someone steals it.
you cant hold a endmill in tre point chuck ,, Three point chucks are actually bad at holding workpieces. 4-6 point is better, especially if you take large chips
Welcome my friend!
NAGYON JÓ VAGY FIÚ! GRATULÁLOK!!!
Thank you and welcome!
Show de dicas parceiro
very nice and very sympathetic.
Thank you very much bro🙂
I like watching your videos but i have just watched you make this last tool ,and when it is finished you use it, but we cant see what you are doing. we want to see. need to see everything as we are learning from you. great work, great videos,great workshop.but show all. Thanks
Good video my friend❤❤❤
Thanks, bro😉
Super 🎉 gratulálok!
Thank you and welcome!
that first one with the magnet will only work if the face of the part in the chuck is already perpendicular to the spindle bore otherwise when attracted to the magnet in the tail stock it will cock at an angle.
Super!
Thanks🙂
I don't know about brilliant but there is a glow.
Nice workshop, but nothing new or special being made here.
👍🏻
Why did you indicator not move when you removed it from the part?? old trick of setting the indicator at the end of travel. just show the actual face runout.
Autodidacte en usinage, j'ai réalisé ces pièces il y a 20 ans .
matkap motorunu bağlarken aparatı pensli yap.civatalar matkap motoruna zarar verir
I don't even have a lathe and haven't run one for 30+ years so honest question why would you not want the hole you're flung to be concentric with the outside diameter?
👍👍👍
Thank you very much!
Esse rasgo da pra fazer na fresadora
Infinite thumbs up
Welcome my friend!
You're a champion with commen sense
Ah good 5:58 you remembered
Is this serious?...😮
önce punta matkabı ile del sonra diger matkapla delersin sıralama yanlış.
parlak tornalarken seramik uç la yüksek devirde tornala
Nice work. Your boring bar holder. Did you make or buy. If you made it, make a video of you making one for ME.
Thank you very much!
Has the vice ever been used or the lathe? Plus drill not centred properly just as easy to put the work in the chuck not too tight and run the lathe in reverse then run the tool up against the work to straighten up sorry to be picky
Welcome!
☝👌👍👍🤝🤝😎
Thanks, bro!
Centrado te salio el agujero
Thuro check Kiya daily gej tuch nahi kiya
No good idea
BRAWO...
If you can’t talk l can’t watch
Welcome🙂
I wish I could keep my lathe as clean as yours!
A clean lathe is not a useful lathe.
I can see why you don’t work in a real machine shop because doing shit like that would get you fired in a heartbeat lmao
I think I lost 20-30 IQ points watching you make that “fly” cutter.
49 years of cnc and manual machining here…..I know a little😁
@@cliffmorrison7074 It's embarrassing to watch, especially with all of the "great job" comments. No wonder American manufacturing is in the shitter...To be fair, the dude has more skill than a novice but nowhere near enough to be confidently posting videos for the whole world to view.
super cool,super cool,super super super cool
Thank you my friend!
I think you meant to say "super novice"...If you think this is cool, you've probably never worked as a machinist or engineer.
@@skaelring-xj3gq why?
@@atomscombining9054 Exactly: why?
@@atomscombining9054 Your enthusiasm is admirable but this is textbook poor machining practice.