I was impressed with your slotting machine. Looks like a lot of work but you seem to be very fast at what you do. I had my boss come and ask me if I could make a internal Hex in the end of a shaft to accept a 1/2 inch allen wrench. I did what he requested on the lathe. Took me about 1 1/2 hrs. I didn't make a machine or get a motor to do the job. I just took a tool bit and ground it a little wider than the lands on a 1/2 inch allen wrench. Sharpened the end and the rest was H.P.F.M.
You are indeed an "EXTREMEST"! Living up to your name. I have absolutely zero lathe/milling knowledge but I loved this sort of thing while I was in high school. Unfortunately Africa being what it is, realising your dream is for the few privileged ones. Anyways, if you should by any chance stray into Johannesburg please let me know. I will happily pay for your hotel bills as long as I can, show you around and ask you about those crazy skills you have and perhaps persuade you to consider me for your "spanner boy" even if I am now 56. Thank you for everything you do and share.
Perhaps, like a shaper, a clapper mount for the cutting tool would prevent dragging the bit on the back stroke, particularly on steel stock. Did the barrel warp after welding on the mount for the tool post. Nice workmanship!
Interesting build. But to be honest I can see some problems on the horizon to. I can't imagine that the tool post is going to withstand much in the way of roughing out in the way that a shaper would. Lots of leverage going on to those four tool post screws.
Wow! What a show! I'm a machinist myself and I think there's some room for accuracy improvement. Probably caused by the equipment you own. But, sir, hats of for your video! Damn this is swift, smooth and looks so easy! I hope the young folks get motivated and start machining too. I'm curious to know how much time it cost to make this video. Thank you and all the best, Job
@@leaningr Self explanatory if you are familiar with machining and welding operations. I had to watch to the end to understand what was being slotted and how the components would accomplish the task.
The level of entitlement/self-agrandizing of some ppl. A guy makes an epic build/video with endless creativity and years of skill that you watch for free but because it's not exactly as desired you a) Wont even tap a thumbs up button b) Think the world revolves around you to the point that you think a Like is worth more than his effort/that your decision to Like has even the slightest impact on his choice of info presentation or that he would even read your comment let alone make a decision based on it. In fact he would prob be less inclined to do what you want because of your self-obsessed bullsh3t
have seen the idea before and thinking on mounting sumting like it vertically on my milling machine , that and a divider should allow me to make splined hubs
To be sure. But for custom sized slots, perhaps internal slots which don't go end to end, this is a well thought out tool. I started on shapers and slotters and could have used one of these as well.😊
He already has three... the lathes !! 😏 (I've mounted parts to be bored on the lathe saddle and ran a boring bar between centres for smaller work) I presume you mean the portable line-borers that are tack welded onto heavy machinery for repair... yeah, that would be a nice project !.. 😉 😎👍☘️🍺
All that skill but in the tool room I worked in you would have been terminated for not using the lathe safely by leaving the chuck key in the chuck when leaving to use the mill. In vocational school people was getting 0 for the day for leaving to chuck key in the lathe chuck. Practice safety !!
I'm not sure which is more impressive - the build, or the video production! I wish I was as skilled in either of them!
Practice practice practice
An outstanding and exceptionally impressive construction and video! All I can say is WOW!
I was impressed with your slotting machine. Looks like a lot of work but you seem to be very fast at what you do. I had my boss come and ask me if I could make a internal Hex in the end of a shaft to accept a 1/2 inch allen wrench. I did what he requested on the lathe. Took me about 1 1/2 hrs. I didn't make a machine or get a motor to do the job. I just took a tool bit and ground it a little wider than the lands on a 1/2 inch allen wrench. Sharpened the end and the rest was H.P.F.M.
You are indeed an "EXTREMEST"! Living up to your name. I have absolutely zero lathe/milling knowledge but I loved this sort of thing while I was in high school. Unfortunately Africa being what it is, realising your dream is for the few privileged ones. Anyways, if you should by any chance stray into Johannesburg please let me know. I will happily pay for your hotel bills as long as I can, show you around and ask you about those crazy skills you have and perhaps persuade you to consider me for your "spanner boy" even if I am now 56. Thank you for everything you do and share.
Very smart solution. I'm impressed...
I always imagine myself working like this, but then reality strikes and takes over.
Perhaps, like a shaper, a clapper mount for the cutting tool would prevent dragging the bit on the back stroke, particularly on steel stock. Did the barrel warp after welding on the mount for the tool post. Nice workmanship!
A clapper would really make sense for some larger work.
Interesting build. But to be honest I can see some problems on the horizon to. I can't imagine that the tool post is going to withstand much in the way of roughing out in the way that a shaper would. Lots of leverage going on to those four tool post screws.
Una solución precisa y maravillosa solo acta para verdaderos profesionales.
With a bit more work to the lathe by adding a ClickSprings style indexer mechanism, you could cut splines.
Nicely done, as always.
Wonderful key cutter in action :)
ultimate brilliance of your craftsmanship. I learn a lot from your videos. Thank you!
Great video and a great tool that we don't see homemade very often. We shared this video on our homemade tools forum last week 😎
Wow! What a show! I'm a machinist myself and I think there's some room for accuracy improvement. Probably caused by the equipment you own. But, sir, hats of for your video! Damn this is swift, smooth and looks so easy! I hope the young folks get motivated and start machining too. I'm curious to know how much time it cost to make this video. Thank you and all the best, Job
Probably months considering all the planned out camera angles. Too, they only show a fraction of what footage was actually shot.
ٍ
Bir sevdadır Kara Deniz yine formdasin klip güzel olmuş yüreğine sağlık yine formunun zirvesinde yine formdasin
C'est beau! C'est très beau! A ton of skills and an awesome entertaining moment. Thank you Sir!
Meraviglioso video e un grande lavoro complimentissimi
The day you will talk and explain things, I will gladly give you a thumbs up!
For a good connoisseur, the images are more than enough.
Explain what? Pretty much self explanatory.
You should start by cleaning the machines, that's where you can learn the most.
@@leaningr Self explanatory if you are familiar with machining and welding operations. I had to watch to the end to understand what was being slotted and how the components would accomplish the task.
The level of entitlement/self-agrandizing of some ppl. A guy makes an epic build/video with endless creativity and years of skill that you watch for free but because it's not exactly as desired you a) Wont even tap a thumbs up button b) Think the world revolves around you to the point that you think a Like is worth more than his effort/that your decision to Like has even the slightest impact on his choice of info presentation or that he would even read your comment let alone make a decision based on it. In fact he would prob be less inclined to do what you want because of your self-obsessed bullsh3t
have seen the idea before and thinking on mounting sumting like it vertically on my milling machine , that and a divider should allow me to make splined hubs
Watching your videos makes me feel like I should have become a machinist instead of a mechanic. Seems so satisfying...
Profi!! Respect! Good lack!
And this year's award for 'Gilding the Lily' goes to . . . . . .
Friendly reminder to never leave the chuck key in the chuck.
Светлая голова и золотые руки!
The Slotter that wanted to Shape or was it the Shaper who wanted to Slot? Nice build!
Very good machining. I do some but I am amature comparing to you I would not take this project on my own I would buy set of die and broch instead LOL
Outstanding job!
Glad you like it!
Очень качественное видео 👍подписался
nice machining
Комментарий в поддержку канала и ролика, а также труда мастера.
Thanks for the show mate 🍻 🇦🇺
You are the Master! Great Video! Greetings from Finland, we have 10cm / 4" Snow on ground! ❄️❄️❄️
Amazing job my friend congratulations
車床高手高高手
Toolmaking at it´s very finest....excellent job.
Parabéns campeão 🇧🇷
22:43 everything reminds me of her... :D
Nice Work and great editing from start to finish!
Excellent job 👍❤
Great project, well videoed.
Nice, great idea
Very good mister good job well done
Wow.. i should have learned to weld and use a lathe... Very nice work M.I.E...
What's next?
Perfect 👏👏👏👏👏👏👍👍👍👍👍👍💪💪💪💪💪💪
Esse cara é um monstro 🤖🤖🤖
great video ideas and edits
Jakiej mocy jest motoreduktor i ile obrotów ?
Bravo, very interesting and well done video
أللهم صلى وسلم وبارك على نبينا وحبيبنا محمد صلى الله عليه وسلم ❤❤❤
Very nice! 👏👏
How do you lock the lathe chuck?
Good vid!
Wow Good good job.tq, 👍
what music is used as background, esp around min 10.?
+ uma ferramenta top ❤❤❤
good music is playing. What's the name?
Thanku sir very nice. ❤
That is great project❤
دمت گرم دا اش❤
Muito bom gratidao
My wife has one of these but she has different tooling on the end of hers.
😂😂
My mind is going to dirty places watching this machine perform it's intended purpose. 😅
Using CF when milling a slot but not threading. Those threading inserts I know for a fact aren't cheap!
Для того чтобы делать шпоночные пазы можно было купить пошивочный инструмент! Я об этом не знал своё время и купил целый 3 тонный станок (((
Super 👍
that's badazz!!
@11:30 brotato music?!
"Slotting Machine" Is that what we call a broaching machine?
Geniiiiiiiisssssssssssss!!!!!!!!
Bravissimo
Did he just did i have 3 lathes flex?
I have three lathes, you don't?
Nice tool, but the same end result can be made with a broach and an arbor press. Much less complicated.
To be sure. But for custom sized slots, perhaps internal slots which don't go end to end, this is a well thought out tool. I started on shapers and slotters and could have used one of these as well.😊
es un genio
i've seen these kind of machines somewhere.. it think it was po.... something :S
Why not a shaper tho?
Ебатель 3000. Супер!
Make your own line boring machine
He already has three... the lathes !! 😏
(I've mounted parts to be bored on the lathe saddle and ran a boring bar between centres for smaller work)
I presume you mean the portable line-borers that are tack welded onto heavy machinery for repair... yeah, that would be a nice project !.. 😉
😎👍☘️🍺
Exelent
Ок
23:28 "shorts"😂
Put a dovetail on the base to adjust depth of cut...😂
Top😮😮
👍
🎉🎉🎉🎉🎉😊😊que trabalho maravilhoso vc está de parabéns 1000 é minha nota um abraço 🫂🫂
Top.
👍👍👍👍👍👍👍👍
А где блмщики!? Хоть кто-то подобное знает видео?
Next, make a slot machine instead!
Белые создают... :)))))
Heavy duty Onlyfans streamers' partner
But yeah, can work also as slotting machine
The Ultimate Sebian Machine 😂
man lässt den schlüssel nicht im futter stecken
На токарний довбальну приспособу ,це повний ідіотізм,вмить в подшипнику шпінделя зробить зазор,потом вообще нічого не виточиш
Keyway broach????
Bad ass❤
Слишком сложно
Something something CNC
All that skill but in the tool room I worked in you would have been terminated for not using the lathe safely by leaving the chuck key in the chuck when leaving to use the mill. In vocational school people was getting 0 for the day for leaving to chuck key in the lathe chuck.
Practice safety !!
ничего интересново
❤
😊
💞💞💞