Trabalhar com torno desse porte, sem equipamento de proteção e com essa placa de mandril gigante girando a centímetros do corpo. Tem que contar a sorte pra voltar inteiro pra casa. Qualquer desequilíbrio ele poderá ser literalmente ralado nessa placa giratória. É triste ver no mundo industrias ainda totalmente alienadas com segurança.
getting bored ? What a funny replay. Perhaps you are young (< 40 years old ?) and, as young people you are always in a hurry ? Joking aside, I think that it is interresting to watch the video at the normal speed, because this job is complicated and we need to know how long it takes to place the piece and to do the job. Speeding the video is interresting when you do the same job many times, for example piercing 10 holes, you can speeding up the video for the nine last holes.
@@Tornaustası-q7c Hi, does your company use in production a deep hole drilling machines (yatay derin delme) ? What is your company name, does it has a website? My name is Yuriy, I am a used metalworking machinery dealer
No gloves no safety shoes I can’t really tell if he’s got safety glasses on but I just hope he washes his hands real good before he goes home and touches mama
Taking into account this video is accelerated, this guy took about 15 minutes to get the job centered - something I routinely do on my cousin's big lathe in less than 30 seconds. Guy left the chuck wrength in situ. That would get you sacked in most places. Its all too easy to forget, start the lathe, and someone gets killed.
Das mit dem Schlüssel stimmt, hat in meiner Ausbildung auch ,,Mecker" gegeben. Die 15 min. finde ich aber angesichts der Werkstückgrösse ok. In 30 sechs. glaub ich nicht.
@@Tornaustası-q7c 30 seconds is entirely normal. Size of job doesn't matter that much. if it took a couple of minutes it might be acceptable. But to take over a quarter of an hour - that's ridiculous. Turn the lathe over once to get two orthogonal offsets - that's a few seconds. Mentally calculate how many turns to wind in or wind out each of the four chuck screws = one second. Wind the chuck screws, loosen what needs loosening first, in accordance with calculations - a few seconds. Check and repeat - 2 or 3 cycles is usually enough. Time is money.
TEN PRZEDMIOT NIE WAŻY 700 TON - NAWET GDYBY TO BYŁ CAŁY WAŁEK TEJ WIELKOŚCI :) ODCHODZĄC NAWET NA CHWILKĘ OD MASZYNY, NIE ZOSTAWIA SIĘ KLUCZA W UCHWYCIE.
It doesn't look safe walking on a oiled machine slide way is what I meant ? I thought the machine may have a walkway ? Great machining content though !!
this man didn't wearing safety glass
Première fois que je voie un tour aussi énorme, et une sacré pièce à usiné 🇨🇵🇨🇵👍
@JeanmarcAndré-f9s This is our job 👍🇹🇷
Nice
From whence dost this eminate?
@@deuteronimus750 Where do you mean?
Nu era mai simplu să pui un capac in locul plansaibei?
why he didn't wear safety glasses
Trabalhar com torno desse porte, sem equipamento de proteção e com essa placa de mandril gigante girando a centímetros do corpo. Tem que contar a sorte pra voltar inteiro pra casa. Qualquer desequilíbrio ele poderá ser literalmente ralado nessa placa giratória. É triste ver no mundo industrias ainda totalmente alienadas com segurança.
👍
Implantar uma nr 😂
@@parnieski I don't understand what you mean.
Гарний токарний. Один недолік - в мій гараж не поміщається...
😄 👍
Расширяй.😂
Is emniyeti buralara pek ugramiyor galiba.....
Uğruyor da kullanan yok
He has not safety equipment in use. That is very risky.
Every part of the machine we operate is a risk, but you are right, thank you.
You mean 700lbs
250 bar 700 tons
700 ton press
That's a BIG LATHE!!!😮
Yes 👍💪
Dommage que la video soit en accéléré; ça gâche tout
Yes, it's true, but I sped it up a bit so that we can watch it without getting bored
getting bored ? What a funny replay.
Perhaps you are young (< 40 years old ?) and, as young people you are always in a hurry ?
Joking aside, I think that it is interresting to watch the video at the normal speed, because this job is complicated and we need to know how long it takes to place the piece and to do the job.
Speeding the video is interresting when you do the same job many times, for example piercing 10 holes, you can speeding up the video for the nine last holes.
What make is the LATHE ?
Skoda
@@Tornaustası-q7c Thank you
Many years working a Big CRAVEN@@Tornaustası-q7c
One helluva lathe.. astounding
@@Tornaustası-q7c Hi, does your company use in production a deep hole drilling machines (yatay derin delme) ? What is your company name, does it has a website? My name is Yuriy, I am a used metalworking machinery dealer
Can I get that at Lowes? No safety gear!
👍
It doesnt matter,,,🤣
на наших заводах всё было, но всё уничтожено.
Why was it destroyed?
👍👍👍
👍👍👍👌👌👌
Torno pequeno
@@gualtierogagliardi376 We're managing 😀
👍👍
@@hydraulicpower81 teşekkürler usta
Это какая страна .
How
this basic rule
Puri vidio me es anadi par saiting hi nahi ho pa rahi
Sorry, I didn't understand.
Nem se fosse de Chumbo pesaria isso
😄
700 tons equals 2 fully loaded B777 with max fuel load .
I don't quite understand what you mean.
Ой, і погано ж це скінчится одного разу... Усі ці покатуньки на супорті, усі ці рядна та ключі на люнетах...
@@MsDamigella I hope there will always be good things
@Tornaustası-q7c I hope so.
No gloves no safety shoes I can’t really tell if he’s got safety glasses on but I just hope he washes his hands real good before he goes home and touches mama
You are right, we have shortcomings.
He's wearing steel capped boots. Although I can´t see what they will be good for when that big cylinder comes crashing down on him.
Se vede că nu ști ce înseamnă să ai contact cu meseria. Strungul e ca o femeie, pe femeie o mângâi cu mănuși?
Safety Last!
Yes, unfortunately.
DOBRZE TO WYGLA,DA ALE GZIE. JAK TEN PRACOWNIK JEST UBRANY GDZIE JES UBRANIE OCHRONNE I KASK NA GLOWIE WIDAC ZE TO INDIE
😊😊😊😊😊❤hayırlı işler
Sağolun teşekkürler
I doubt that it weighed 700 tons maybe 7
700 tons hydraulic press cylinder
Actually I had work with this machine, 11 years ago.
Nice machine 💪
お仕事ご苦労様です。安全帽子～ヘルメットをかぶって作業してください。😊
please Thank you for thinking of us.
occhiali e guanti
this is wrong way
watching a jack ass set up
I don't understand ?
Taking into account this video is accelerated, this guy took about 15 minutes to get the job centered - something I routinely do on my cousin's big lathe in less than 30 seconds.
Guy left the chuck wrength in situ. That would get you sacked in most places. Its all too easy to forget, start the lathe, and someone gets killed.
Thanks for the reminder
Not to mention no eye protection anywhere in sight. (Pardon the pun)
Das mit dem Schlüssel stimmt, hat in meiner Ausbildung auch ,,Mecker" gegeben.
Die 15 min. finde ich aber angesichts der Werkstückgrösse ok. In 30 sechs. glaub ich nicht.
I mean, I didn't have a thought that I would reset the part in a few seconds, but I think it's normal. I thank you very much
@@Tornaustası-q7c 30 seconds is entirely normal. Size of job doesn't matter that much. if it took a couple of minutes it might be acceptable. But to take over a quarter of an hour - that's ridiculous.
Turn the lathe over once to get two orthogonal offsets - that's a few seconds.
Mentally calculate how many turns to wind in or wind out each of the four chuck screws = one second.
Wind the chuck screws, loosen what needs loosening first, in accordance with calculations - a few seconds.
Check and repeat - 2 or 3 cycles is usually enough.
Time is money.
All that and I didn’t see anything actually being machined.
Wooow mantap
thank you
I like the work because Is my work
We do our job with love
円筒旋盤の心を出すのが大変ですね。
Thank you for your understanding
Made in TÜRKİYE...
TEN PRZEDMIOT NIE WAŻY 700 TON - NAWET GDYBY TO BYŁ CAŁY WAŁEK TEJ WIELKOŚCI :)
ODCHODZĄC NAWET NA CHWILKĘ OD MASZYNY, NIE ZOSTAWIA SIĘ KLUCZA W UCHWYCIE.
not too bright? 🙄 that is the capacity of the cylinder they are making
yes, that's right 👍
Don't like the walking directly on the lathe bed , poor design ?
I didn't understand exactly what you mean?
It doesn't look safe walking on a oiled machine slide way is what I meant ?
I thought the machine may have a walkway ?
Great machining content though !!
unfortunately not
Il n'y est pas piqué par un lièvre ,est ce un vrai tourneur ?
It is fine. No harm. That's the least of the dangers
ovo se zove patnja gde je ovde sigurnos za ove radnike
👍