I am not a machinist, and I do not have access to machinery. Would you consider conducting a simple experiment? I wish to know the machining time difference between using a parting tool to remove gross dimensions versus conventional lathe work. With a piece of material approximately 50 mm in diameter reduce it to 25 mm over 150 mm length using the parting tool and record the time to machine. Then, could you repeat the process using conventional lathe work? I believe the parting tool will be much faster, but I have no way of verifying. I appreciate your consideration.
Watch the video and stop being so precious-on every occasion that the workpiece was held in the bench vice the work was protected by a rag. I think there were 4 occasions. Obviously you're not going to do that in a machine vice.
прекрасные самоделки и наблюдать одно удовольствие! спасибо!
Lindas ferramentas!você é sempre bem-vindo na minha casa!parabéns!
Thank you and welcome my friend!
Bravissimo super 👍
Thank you very much for watching and welcome!
Muy bueno. Gracias y Felicidades...
Thank you, bro🙂
❤MASHA.ALLAH.GOOD.WORK❤
Thank you and welcome my friend!
Enough said 😁
🙂
Very good video👍🔥🔥🔥
Thank you, bro!
From Greece.....👍👍👍
👍👍👍👍👍
Thank you and welcome!
👏👏👏👍
Thanks
Felicitari pentru proiectele tale si mai ales pentru atelierul frumos si dotat pe care il ai !
Thank you, bro
Great, thanks for sharing❤
Tus videos son geniales da gusto verlos y verte trabajar. Por las herramientas tan bonitas y prácticas que haces 💪💪💪💪💪👍👍👍👍👍
Thank you very much for watching and welcome my friend!
🎉🎉🎉
Hello my friend, welcome to my channel!
Audio and solid production. good♬
👍👍
Thank you so much!
What lathe is that ?
Machine made in China METAL MASTER X40100
If only I could use my Lethe properly and put threads on a bar, instead of using a die, love your work and I am learning slowly.
Thank you very much for watching and welcome my friend!
Great video. What grade of steel do you use for these projects?
Hello! Love your videos! Amazing stuff!! Whats in the little bottle @25:25 (ish)?
I am not a machinist, and I do not have access to machinery. Would you consider conducting a simple experiment? I wish to know the machining time difference between using a parting tool to remove gross dimensions versus conventional lathe work. With a piece of material approximately 50 mm in diameter reduce it to 25 mm over 150 mm length using the parting tool and record the time to machine. Then, could you repeat the process using conventional lathe work? I believe the parting tool will be much faster, but I have no way of verifying. I appreciate your consideration.
Welcome!
By the way I do always wave back. Sad.
Welcome!
Always disappointed how you never use soft jaws to protect your work from damage in your bench vice !😢
Welcome!
Watch the video and stop being so precious-on every occasion that the workpiece was held in the bench vice the work was protected by a rag. I think there were 4 occasions. Obviously you're not going to do that in a machine vice.
👍👍👍👍👍👍👍