Badass simple combo! I have p heads and a edelbrock intake and a f cam. Was thinking of doing the on3 kit or spray. That combo is just so simple and works
Running my Miata on a explorer swap with a wct5, tbird 8.8 rear end, and a holley sniper. Semi gutted car thats e85 ready Id love to see if I could crack low 10s on my mickeys. I know what I gotta get this winter lol
I have a sportsmans 347 stroker block just 2 bolt mains with gt40p heads and a Holley super sniper with the on3 kit with the 76mm upgrade. Lifted a head on 16lbs of boost. Just installed head studs and I’m ready to rip my 10 sec pass too. Much love
@@Neomustangs thank you sir. I always want to comment on every video. Can't keep sayin the same sh*at all the time. Figured bench talk is always good in the hotrod world. I've been beating on these things for over 20 years now. I can't praise the expo 5.0 enough.
Keep up the great work brother, I like seeing you do short reviews of other cars and combinations, I also have a 5.0 out of an 89 mustang with gt40p heads and a B303 cam and 70mm turbo . it's all going in a 2000 ranger, I haven't quite gotten it all installed yet,hopefully soon.
what up ashtabula! i got my on3 kit this week. going on my 93 calypso notch with a 331 stroker, edelbrock heads, edelbrock intake, fcam. ive been watching a lot of your videos. looking forward to more! say hi to the plats bro's!
Hell ya! You are that guy out there helping others achieve goals. Fucking awesome 👌 positive people keeping the car community alive and healthy. Too many toxic ass hats out there sometimes.
Great video again I'm getting more and more excited about my explorer head intake upgrade already have the e303 in it making noise but with other mods it'll be fun.
I have a 85 foxbody gt that I want to turbocharge. I also have a 91 gt with full bolt on stock bottom end and a on3 turbo kit runs great I love this shit lol I love you content as well buddy keep it up.
that is such a cool ride!!! I’m glad he hit 10’s. I’m really on the fence about going with an On3 kit or a full top end build. Going for a fun street car to play with after work and on the weekends. I got about 5k to spend including labor. Any recommendations? thanks in advance and I love the channel!!! Just subscribed=)
Great job again. I have a on3 kit sitting next to my 90 lx. Your videos are making me think I should install it. But not sure who can tune it. Who do you use?
I also enjoy watching somebody squeeze every last bit of performance out a basic combo including a lot of stock parts. Some people will practically shun your ass for saying you like 2.3 turbos also but I do like to watch the shit get beat out of them also. I love all the fox's, even the lowly SVO 😒
I’ve been thinking about on3 the only thing not sure about is MAF, most videos I see is no MAF but they show a kit with MAF, not sure what to do? Any help would be nice thinks
I’m running a 302 block with gt40 lll bar heads Edelbrock intake manifold BCam Would ON3 be a nice upgrade? If so where can i find a kit. Please advise Thanks!
I have a 95 cobra that I would like to boost I also have a 01 explorer engine so my ? Is. does either engine have forged pistons or do they have hyper pistons and how do they hold up to boost
Last time out I peddled it to an 10.87 with a t5 but I have a mostly removed interior but I'm running 10psi our next drag even here isn't until Dec 4th so I got to wait to make more passes. I have some crappy videos on my channel.
I also run a stock Explorer engine with an ON3 kit. Good supporting mods (Fuel system, Holley EFI & WMI). On 11 lbs she makes 555hp to the tires. 👍
Bout where he is I’d think now
What fuel?
91 octane with the water/meth kit
I have a 94 with gt 40 p heads any one know how that fit whould be on the p head ? Sounds like you guys are doing well with the Fox.
That's a fun and reasonable street car right there. Most fun I ever had in a fox was in a similar combo.
Yes siR!
MAAAAAAN that little hatch was getting down!
Yes sir !!
Beautiful car. Love the Motorsport mudflaps even. And damn…. From low 11’s to 10.76 just with the right tires… yee haw.
More in it too!
Badass simple combo! I have p heads and a edelbrock intake and a f cam. Was thinking of doing the on3 kit or spray. That combo is just so simple and works
Yes it does
I got goosebumps waiting and watching it take off!!!
Hell ya!
Awesome video Neo… Love that combo where you can rip off very respectable times & cruise with your friends & family on the streets 👍🏻
Yes sir !
Running my Miata on a explorer swap with a wct5, tbird 8.8 rear end, and a holley sniper. Semi gutted car thats e85 ready Id love to see if I could crack low 10s on my mickeys. I know what I gotta get this winter lol
I have a sportsmans 347 stroker block just 2 bolt mains with gt40p heads and a Holley super sniper with the on3 kit with the 76mm upgrade. Lifted a head on 16lbs of boost. Just installed head studs and I’m ready to rip my 10 sec pass too. Much love
Send it!
Stock bottom end, gt40p head, ARP bolts, 70mm on 3 kit. And other supporting mods.. being tuned by akron horse power.
nice
Iove to see them stock ford mud flaps on any stang perforably a vert , thats different cause I ain't never seen a mut
Racing at track with flaps 👌...
Cheap power to go fast with an On3 for sure
Wonder what his fuel system is looking like
Love all the stock bottom end stuff you putt out
Ty !
Fixing to build stock bottom end 5.0 gt40 topend ported with vortech v3
Cool
Wish I could of just kept my setup up stupid simple like you say!!
Yes sir !
I'm guessing springs and rollor rockers on heads at least.
Love it. 3:10
Badass sir. Got my Mac valve all hooked up. @80 duty cycle I'm making 10psi with a 4.5 gate spring. Little ranger rips 265/55r17's
Nice man !
@@Neomustangs thank you sir. I always want to comment on every video. Can't keep sayin the same sh*at all the time. Figured bench talk is always good in the hotrod world. I've been beating on these things for over 20 years now. I can't praise the expo 5.0 enough.
Yes sir !
Shoot.. the best bang for your buck in my day on a fox was to 351w roller block swap it.. with a good set of Windsor Sr heads..f cam..
Ya I remember. That changed with cheap turbo kits around 2007
I got same set up love it explore gt 40 heads and intake my put together turbo kit on megsquirt ecu
Simple and effective.
That is a good looking car I like his wheels.
Yep the Jegs ones
Like the short reviews too.
Ty
Good shit ..makes me hate my decision even more
Yes sir !
As always thank you for the great content!!!
My pleasure!
Love the stock bottom end stuff with some select bolt on's!👈🔥💯
Right !! Me too
Still uses A9L too... At a time factory ECUs are being vacated, nice!
Yes sir !
Hell yeah that's cool. I like the short to the point videos.
Thx
Nice video Dan!!
Great video.....can't wait to build my next fox with probably on3 kit an a 351w roller I got....your channel got me on it to do one
Nice !
Hell Yeah
Yep !
Keep up the great work brother, I like seeing you do short reviews of other cars and combinations, I also have a 5.0 out of an 89 mustang with gt40p heads and a B303 cam and 70mm turbo . it's all going in a 2000 ranger, I haven't quite gotten it all installed yet,hopefully soon.
Nice thx man !
@@Neomustangs nice video been subbed and watching ur channel for a but. Is he running a 15lb spring or a controller. And what gas??? 93?
@@Neomustangs what slick and size???
Love your videos, keep up the great content Dan. You, Brew2l and Foxcast rule RUclips!
Thanks for the kind words man!
Hell yeah!!
Ye sir !
Man great video, simple easy proven. Keep them coming
More to come!
what up ashtabula! i got my on3 kit this week. going on my 93 calypso notch with a 331 stroker, edelbrock heads, edelbrock intake, fcam. ive been watching a lot of your videos. looking forward to more! say hi to the plats bro's!
Sounds great!
Hell ya! You are that guy out there helping others achieve goals. Fucking awesome 👌 positive people keeping the car community alive and healthy. Too many toxic ass hats out there sometimes.
Thanks man!
Great video again I'm getting more and more excited about my explorer head intake upgrade already have the e303 in it making noise but with other mods it'll be fun.
That is awesome!
Love it. Wonder if i could run that setup on a stock explorer make a little turbo sleeper awd beast lol.
Yes sir
The combo just works lol
You know lol
Damm I can’t wait to work on my tin can notch gunna throw a DSS built shortblock and get the on3 kit and let her eat
Yes sir !
Love this stuff! Definitely looking to do a similar setup just to tool around town and have fun!
Nice man !
Love any content that you post keep it up brother!!👊🏻
Thanks! Will do!
Damnnnnnn 🔥🔥🔥
zooom!
Stock block 🔥, mines a 89 block stock crank 306 runs 6’s in the 1/8
Cool
How's this combo with a C4 transmission??? I know stick is way more fun. THANKS 👍
Mid low 10s
@@Neomustangs what stall torque converter and rear end gears? Again thanks man!👊👍👍
Damn!!! 🇺🇸💪🏼
Yes!
That's sick love it
Thx!
I have a 85 foxbody gt that I want to turbocharge. I also have a 91 gt with full bolt on stock bottom end and a on3 turbo kit runs great I love this shit lol I love you content as well buddy keep it up.
Awesome video love seeing vids like this. What size slick y’all run on that car
26” and thx !
that is such a cool ride!!! I’m glad he hit 10’s. I’m really on the fence about going with an On3 kit or a full top end build. Going for a fun street car to play with after work and on the weekends. I got about 5k to spend including labor. Any recommendations? thanks in advance and I love the channel!!! Just subscribed=)
Honestly they both will work great. Tune is a key part of that
Enjoyed it man 👊
Just a short video!
@@Neomustangs yep short and sweet. I like em like that. If it's past 10 minutes I probably won't watch unless I'm really interested.
oooo man i missed the 9.80 pass
How was the main part of the video lol!
Great job again. I have a on3 kit sitting next to my 90 lx. Your videos are making me think I should install it. But not sure who can tune it. Who do you use?
You should! I tune myself with Dave here in NE Ohio. Your close bring it here. Make sure the cars right!
Do you know what injectors and fuel pump he is running. Love your channel.
42s and wired 340
I love it!!
Yes sir !
I also enjoy watching somebody squeeze every last bit of performance out a basic combo including a lot of stock parts. Some people will practically shun your ass for saying you like 2.3 turbos also but I do like to watch the shit get beat out of them also. I love all the fox's, even the lowly SVO 😒
Well said!
@@Neomustangs what about you... can you dig on some 2.3 turbos?
Was the fox running e85 or pump 93?
Pump 93
I’ve been thinking about on3 the only thing not sure about is MAF, most videos I see is no MAF but they show a kit with MAF, not sure what to do? Any help would be nice thinks
MAF if you tune A9L and quarterhorse. No MAF if you run terminator X
hell yeah, that car has mid 10's no problem!
Easy
I’m running a 302 block with gt40 lll bar heads
Edelbrock intake manifold BCam
Would ON3 be a nice upgrade?
If so where can i find a kit.
Please advise
Thanks!
Yes it would. Don’t forget tune !
Where can I find On3 turbo
On their website ?
Good vid
Ty !
Hey Dan, do you run a CD ignition box such as MSD on your turbo cars? If so did you see any power gain or need it to take care of a miss? thanks
It would help yes. No CD tho
@@Neomustangs ok thanks for the response. I'd say you made really solid power with basically stock ignition.
@@Neomustangs ok thanks for the response. I'd say you made really solid power with basically stock ignition.
How much power is he making neo?
I think he said somewhere around 500?
Do I need to do anything to the stock to tune it ? Anyone know who can tune one in socal area?
The tuner will have. A chip
I have a 95 cobra that I would like to boost I also have a 01 explorer engine so my ? Is. does either engine have forged pistons or do they have hyper pistons and how do they hold up to boost
Hypers are known to not be as good as forged factory however its all in the tune. IMO
IMO? And thanks for the info
@@joshuaarthur213 in my opinion it’s all in the tune. iMO
@@Neomustangs idk if I want to keep it stock bottom end or not idk if I keep over thinking it or not lol
What kind of power does Randy’s car make on that setup and on what psi? Wondering bc I have a similar combo I’m putting together.
No idea. He just turned it up last year drives on 15/16 pounds lol
Ya Neomustangs
Tight stock fan an 5Oh Efi..
Awesome. How much boost?
16 pounds
@@Neomustangs yea that’s a decent amount of boost haha
What size turbo do you have on your car
76/75
What rear gear is in the LX?
355i do believe
Like this video
thx!
Glad to see my old turbo kit still putting power down! Good pass randy!
Never counted out !
T5 trans? 10.7x is nothing to sneeze at.
Nah he had a tremec. 10 spline tho.. so
@@Neomustangs boooo 😁
Last time out I peddled it to an 10.87 with a t5 but I have a mostly removed interior but I'm running 10psi our next drag even here isn't until Dec 4th so I got to wait to make more passes. I have some crappy videos on my channel.