Thank you for the video! Got my wiper motor and linkage fixed properly Easy step by step. Just had to watch how you did it and all worked out in the end
Perfect video. Awesome job explaining how to remove the wipers from the studs! You did such an awesome job, I think I did it right the first time! Thank you!!!!!!!
Thank you so much for this video just changes mine. Easy to follow video, only problem mine was frozen half way up, wouldn't come out without removing wiper motor nut to drre up arm. But this video nailed it.
Thanks for these! Always well put together and super helpful. Wipers now work again, but on any of the delays, they move up about 4", stop, hold there for around the delay time its on, before then completing the cycle. Any thoughts? Low and high work fine.
Followed every step exactly but my wipers won’t go back down properly and for some reason my wipers run 3 times every time I start my truck. Any advice would be great
Do the 2013 silverados have a pulse board? ive replaced the motor and the switch in the cab for the wipers and they still freeze or only move one speed
+Silvester Cruz The pulse board is in the motor assembly for these trucks. We currently do not carry a replacement motor for this vehicle at this time!
I replaced my wiper motor and linkage, the motor completes a cycle then moves a little bit more. I don’t remember that happening with my old motor, is that normal for new motors, or is something wrong?
+grasser 82 We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
+Oscar Romero Thanks for watching! There could be multiple reasons why you're having this particular problem. We suggest taking your vehicle to a nearby reputable shop to identify the cause. Once you know the cause, we'll be happy to see if we carry the parts and how-to videos needed for your repair.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
Very good presentation
Thank you for the video! Got my wiper motor and linkage fixed properly
Easy step by step. Just had to watch how you did it and all worked out in the end
I just replaced the entire assembly with help from your video. It was great.
I've done this job 3 or 4 times and have found that removing the hood is incredibly helpful, may help to have two people to put it all back together.
Perfect video. Awesome job explaining how to remove the wipers from the studs! You did such an awesome job, I think I did it right the first time! Thank you!!!!!!!
Best tutorial video I've seen yet. Very helpful thank you
Thank You for this video, I fixed my wipers and saved a ton of money.
+Railyard Productions Thanks for checking us out! 1AAuto.com
Thank you so much for this video just changes mine. Easy to follow video, only problem mine was frozen half way up, wouldn't come out without removing wiper motor nut to drre up arm. But this video nailed it.
Thanks. I never expected it to be that involed😮
Followed every step and it was a breeze, thank you for this
Thanks for these! Always well put together and super helpful. Wipers now work again, but on any of the delays, they move up about 4", stop, hold there for around the delay time its on, before then completing the cycle. Any thoughts? Low and high work fine.
Thank you …. You saved me a one hour charge at the dealership.
Thanks for the video. Are there washers on motor shaft that need to be installed onto a new motor?
Thanks for this…. I’m heading out to change mine now
Very important to mark linkage position like he said.
This helped me get it done. Thanks!!
Only hiccup was my wipers died half way the windshield so getting the linkage out was a bitchhhhhh
Thanks this video is excellent leaves no doubt how to replace wiper motor.
+John Bishop Thanks for checking us out. Shop for high quality auto parts on 1AAuto.com:
1aau.to/m/Shop-1AAuto-c
What if the wiper motor blew in the up position? Do you still put mechanism in the same spot?
Followed every step exactly but my wipers won’t go back down properly and for some reason my wipers run 3 times every time I start my truck. Any advice would be great
I installed new motor and its stuck in the up position is there a way to relearn it?
I have a 2008 tahoe,wipers only work one speed.Does 2008 tahoe have a pulse board? I can’t find the info I’m looking for
So I started this project and didn’t make a mark. Came and found your video. What do I do now?
Life saver!!
My linkage won’t move but motor is good. If I turn on the wipers, linkage jerks once but won’t move anymore. Any ideas what I could be?
Do the 2013 silverados have a pulse board? ive replaced the motor and the switch in the cab for the wipers and they still freeze or only move one speed
+Phil Perrella Thanks for watching! The 2013 Silverado has the "pulse board" built into the multifunction switch, so it just has the motor.
@@1AAuto thanks! any ideas on why id still be having issues if both motor and switch were replaced, and wipers still only function at slow speed
How do you know if it is the motor or the pulse module? Also, is there a link for the pulse module part?
+Silvester Cruz The pulse board is in the motor assembly for these trucks. We currently do not carry a replacement motor for this vehicle at this time!
I replaced my wiper motor and linkage, the motor completes a cycle then moves a little bit more.
I don’t remember that happening with my old motor, is that normal for new motors, or is something wrong?
Wiper motor went out in the middle of the storms rolling through AL.... This hour drive home is taking a bit long!
GOD BLESS YOU
My motor sounded stripped you could help it and it would go and stop in the same place bought another one and it does the same thing?!
+grasser 82 We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
Did you find the problem?
Is this what I need to change if my dont turn on?
+Oscar Romero Thanks for watching! There could be multiple reasons why you're having this particular problem. We suggest taking your vehicle to a nearby reputable shop to identify the cause. Once you know the cause, we'll be happy to see if we carry the parts and how-to videos needed for your repair.
Nice ground wire 😅probably why didn’t work
This is fucking brutal I do all my own work abd can't get the fucking assembly out it's been an hour and a half