Thank you for this video. I not only was able to add myself, but I was also able to add an object. The left side had me drop an item off on a table so both of me were in the same video but at the end of this fusion clip, it was just me on the right with the object on the left side. I learned the importance of razoring clips so only what you need is in the fusion clips. Turned out well and I couldn't have done it without your video. Thank you
Thanks for yet another amazing tutorial !!! Especially that bit with softening the edge, for my project ( I was filming outside) lighting had changed slightly so I applied colour corrector node (reduced gain a bit) all looks great !!!
This way makes a lot more sense! I was pretty much trying to do all this in the inspector and i would have a long ugly line every single time. Thanks for this Tutorial!
I know this is an old video but I'm commenting anyway. THANKS for making it! Just what I was looking for. I have been "cropping" the top video layer to reveal the bottom (showing the clone) but your method makes much more sense. (more options and better rendering etc) Cheers from Canada!
definitly underrated channel this. I know why i hesitated to click on this (glad i did but still) the thumbnail looked a bit too shadowy to be appealing. might be something to work on, everything else was awesome!
@@ThatModernDude Dont worry about it! I have made a lot worse xD Oh, something else about thumbnails that I just now notice. When its shrunk down to normal thumbnail size its pretty much impossible to read the text. (Also something I struggle with :p) Have a good day:)
Thanks for this. The only thing I couldn't figure out was how to zoom in while in the media 2 box to check my work. I know it's probably something obvious (which is why you didn't mention how to do it), but I couldn't figure that out. Brilliant video and very helpful!
Note to self: - @3:12 So the video on top goes into the upper node (foreground which is also on top) because it takes is displayed over the bottom image
Idk this tutorial looks a lot more harder and more advanced than other tutorials. Just over lap the footage and move the crop left or right and soft edges. No need to go to fushion tab.
hi! i have a question regarding your video on how to cut to music. I did everything like you explained with the adjustment layers and stuff, but I did it with my headphones and now the cuts are at the right place when I listen to it with headphones, but when I watch it without headphones, just with my MacBook speakers, the cuts don't match the beats. do you know why that is and/ or how to fix it?
![HOW TO CLONE OUT ANYTHING IN FUSION [FREE VERSION TOO!]- DaVinci Resolve Paint Out Tutorial](http://i.ytimg.com/vi/lGq3KVWbDZ8/mqdefault.jpg)
Make sure that when you are filming you DO NOT overlap your footage! That will be covered in the more advanced tutorial!
where is the more advanced tutorial?
@@EngineNoise305 Ditto
THIS CHANNEL IS SO UNDERRATED, HOW DOES IT ONLY HAVE 18K SUBS?!
🙏 must be the accent
I agree, some people say that about my channel too... :(
Simple. Efficient. Excellent video! Thanks so much!
Other youtubers would have take 20 to 30 minutes for this... 🤣🤣 You're just a awesome man. ❤️
Thank you so much, I'm on a deadline for Uni and literally have 15 minutes left, you just saved my life ❤
That tip about timing them up in the edit page by turning down the blend is such a genius idea
As a user of free Davinci 19 version and no access to magic mask, this is so exciting for me. Thank you!
You uploaded this video 2 years ago, it help me today, well, in South African times.😂😂😂 Thank you.🙏🙏🙏
Wow! I didn’t realize how easy it was to do this! Thanks for showing me how to do this!
Thank you for this video. I not only was able to add myself, but I was also able to add an object. The left side had me drop an item off on a table so both of me were in the same video but at the end of this fusion clip, it was just me on the right with the object on the left side. I learned the importance of razoring clips so only what you need is in the fusion clips. Turned out well and I couldn't have done it without your video. Thank you
Thanks for yet another amazing tutorial !!! Especially that bit with softening the edge, for my project ( I was filming outside) lighting had changed slightly so I applied colour corrector node (reduced gain a bit) all looks great !!!
Glad the tutorial helped! The colour corrector node will always help even more like you said!
This way makes a lot more sense! I was pretty much trying to do all this in the inspector and i would have a long ugly line every single time. Thanks for this Tutorial!
Thank you very much I can't tell you how important it is for me. I hope you achieve whatever you are aiming.
Man! You just saved me HOURS! Thank you!! You have a new subsciber.
Fantastic! Welcome aboard
I know this is an old video but I'm commenting anyway. THANKS for making it! Just what I was looking for. I have been "cropping" the top video layer to reveal the bottom (showing the clone) but your method makes much more sense. (more options and better rendering etc) Cheers from Canada!
Awesome! Straight to the point. Well done 👍🏻
Thank you for making this tutorial. I learned a new thing today.
Yay!
THANKS MATE . THIS VIDEO HELP ME WITH MY FINAL PROJECT
No problem 👍
I would love to see the advanced version!
definitly underrated channel this.
I know why i hesitated to click on this (glad i did but still)
the thumbnail looked a bit too shadowy to be appealing. might be something to work on, everything else was awesome!
Thanks for the feedback!! And the kind comments! Thumbnails are my weakness for sure, among others
@@ThatModernDude Dont worry about it! I have made a lot worse xD
Oh, something else about thumbnails that I just now notice. When its shrunk down to normal thumbnail size its pretty much impossible to read the text. (Also something I struggle with :p)
Have a good day:)
yes please make it more a more complicated scene , love the vid btw
Cheers! Really well explained and easy to grasp!!🙏🏾👌🏾
Thanks for this. The only thing I couldn't figure out was how to zoom in while in the media 2 box to check my work. I know it's probably something obvious (which is why you didn't mention how to do it), but I couldn't figure that out. Brilliant video and very helpful!
Great tutorial! Works as explained. 🙏
it was very usefull thankx alot
Glad it helped
Did you ever make that video of interacting? I’ve yet to find one talkin to yourself. I tried myself. Super hard lol
no not yet. I can do one soon!
Hi, great video! I would very much like to see another tutorial on how to interact with yourself (cloning)
best and simple tutorial!
Thank you. That was fun. You are cool dude.
Awesome tutorial would love to see that advanced one!
Very helpful. Thanks
This was great. Do you have a video on slight alignment issue during this task? if not.....
Brilliant tutorial!!
Note to self:
- @3:12 So the video on top goes into the upper node (foreground which is also on top) because it takes is displayed over the bottom image
Idk this tutorial looks a lot more harder and more advanced than other tutorials. Just over lap the footage and move the crop left or right and soft edges. No need to go to fushion tab.
It is good practise to accomplish all VFX in fusion tab
bruh momento thanks !!
LEGEND!!
Thanks bro really helped out
Awesome thank you!
Thank you, man.
Great! Nice and simple! Thanks! Would love to see advanced version.
thanx bro its help me so much
Good content man⚽
Nice video so helpful ❤️❤️
Nice explanation ❤
Thanks Man!
Helpful, thx!
awesome. thank you
You're welcome!
Thank you sir!!!
Thanks for that. Nice and simple. Would be interested in advanced also.
Thanks! Glad it helped! It’s on its way!
Thanks for this!
thankyou sir ✌✌
thanks!
thank you!
is there a faster auto way of doing this?
maybe tracking only pixel movement?
ive got 20 ppl i want to composite
I Would Like For You To Show Us How To Create A Video Of us Talking To Ourselves
thanks bro!
is there a way to offset the second version of the footage? like move it up a little.
😊 thx 👍
Why is nobody commenting that you can do this in 10 seconds using the crop tool?
Can we get the advanced version
Will this work with davinci 17?
Question, can you or is there a way to do this with more than two clips?
Yeah definitely. It’s all in the filming
That's... a bit unnecessarily complex, but ok. I used Vegas for a long time and there you can do this with, like, five clicks. But anyway, thanks.
Im getting two small glitches in the exported file. anyway to fix this problem?
NVM. I simply put a cut right where the glitch was and it went away
hi! i have a question regarding your video on how to cut to music. I did everything like you explained with the adjustment layers and stuff, but I did it with my headphones and now the cuts are at the right place when I listen to it with headphones, but when I watch it without headphones, just with my MacBook speakers, the cuts don't match the beats. do you know why that is and/ or how to fix it?
I would render the video and then check the results
Does this work the same for davinci 17?
Sure does!
Is it the free version?
Yep!
🌹🌹🌹
👌🔥🔥
🙏
Great video! Have a look at our account and sub if you like the content 👍
thank you so much
No problem!