Yeah - if I put it in full power - I can get a few seconds of it running before the battery safety system disables the battery. lol it’s ALOT of power draw
Probably best to keep the max width modulation to 50%. That’s fine it just makes it last longer between charges, and gives you a safety margin for the PWM motor
I got a larger motor which required me to drill a larger hole in the gear it came with so it would fit on my motor. I only run it at 70% power at most because the battery shuts down due to a built in safety mechanism if I give it too much power!
Here is the motors I had to replace because the OG ones got burned out with the PWM. amzn.to/4ar2QFk To attach the gear from the old to the new one, you need to drill out a bigger hole in the gear. Big pain unless you have a drill press. Good luck!
I was thinking the same thing.... I didn't order anything on Amazon I took an old drill and took it apart, identified the wires for the battery connector and removed them from the mini "computer board" and marked the handle past where the piece is and cut it.... Put the mechanism back in the part I cut off and connected to the wires for the old battery connector that I clipped....... And a 4ah 18v in high cooks this car..... I came looking to see how much faster it would be if I used my 40v chainsaw battery and after seeing it I'm like " fk that she's already spinning wheels in turns that looks slower" I wonder why it's that way if you're adding almost 3x the volts?
@@TNTBA haha it’s all good man, I appreciate the reply and I’m sorry for being such a dick. I was just suuuuper annoyed at the music because I did actually enjoy your vid and wanna make something special like that for my kid
I would Definitely like to know how you did this and need instructions
Soon ™ haha
Arthur is cool
Helmets!!!!!!
Parts list ?
Any more info on how to do this ??? Parts list ans walk thu video !!!
Have you had issues with this setup kicking the battery into safety mode and shutting down power completely until reset?
I'm having the same issue
I am as well. The only way I was able to fix that was to add the speed controller and I can't increase the speed more than about 70%.
Yeah - if I put it in full power - I can get a few seconds of it running before the battery safety system disables the battery. lol it’s ALOT of power draw
Probably best to keep the max width modulation to 50%. That’s fine it just makes it last longer between charges, and gives you a safety margin for the PWM motor
Hooked my kid's up to a 40v stock and smoked the motor (knew i would). Parts list? LoL
I got a larger motor which required me to drill a larger hole in the gear it came with so it would fit on my motor. I only run it at 70% power at most because the battery shuts down due to a built in safety mechanism if I give it too much power!
@@TNTBAtry it with a Flex tools 24v battery. The 10ah ones put out over 2500 watts. 🫣
I should re do this video with a how-to guide, huh?
@@TNTBAlet's go 😁
Can I get a link where to buy that same PWM?
Thanx!
Sorry for the late reply: amzn.to/3wtVFyz is the PWM
Here is the motors I had to replace because the OG ones got burned out with the PWM. amzn.to/4ar2QFk
To attach the gear from the old to the new one, you need to drill out a bigger hole in the gear. Big pain unless you have a drill press. Good luck!
tutorial on installing sound engine boss
semi battery next
I don’t think that will affect speed. Only longevity
@@TNTBA we shall see
@@scifiguy4132it will be slower 24v vs 40v and they weigh 10x more than the 40v
My 18 volt will smoke that
I was thinking the same thing.... I didn't order anything on Amazon I took an old drill and took it apart, identified the wires for the battery connector and removed them from the mini "computer board" and marked the handle past where the piece is and cut it.... Put the mechanism back in the part I cut off and connected to the wires for the old battery connector that I clipped....... And a 4ah 18v in high cooks this car..... I came looking to see how much faster it would be if I used my 40v chainsaw battery and after seeing it I'm like " fk that she's already spinning wheels in turns that looks slower"
I wonder why it's that way if you're adding almost 3x the volts?
Tried doing this and skipped a few steps and blew up the control module 🤣
I bet this is cool, I’ll never know though because you have music that makes me feel like I have schizophrenia, playing way too loud over everything.
@@muchachogrande2019 it was my first few videos. 🥴
@@TNTBA haha it’s all good man, I appreciate the reply and I’m sorry for being such a dick. I was just suuuuper annoyed at the music because I did actually enjoy your vid and wanna make something special like that for my kid
Kill the background music
I’ve had issues with music on my videos. Need to work on it! 😅😅