Husqvarna RZ-series Zero Turn Mowers: Maintenance
HTML-код
- Опубликовано: 24 июл 2024
- Part 4 of 4. Learn how to maintain your Husqvarna RZ-series zero turn mower. Topics include lubrication, deck leveling, blade replacement, changing the oil, air filter replacement and cleaning.
Авто/Мото
I expect this mower will last several seasons with decent care. ruclips.net/user/postUgkx1VWTrayKBdCKAjzAcZ_Eg4dhHTae3LkN also recommend Also, I ran across the problem with it not starting the 2nd time I used it. There is a safety switch which is pushed in by the chute or mulching piece being attached to the deck. I took the cover off and it wouldn't start. Put it back on, no problem. It takes only a minute with 2 easily accessible wingnuts and no tools. This mower starts up first crank each time and it is a joy to use. It also mows in reverse by putting the key to the reverse area after starting and pushing in the triangular button. It will stay in reverse mode until you turn it off. All in all, for my homeowner needs, I really like this mower-and at 70 bucks a cut here in Miami, it's already more than 1/3 paid for itself in a month.
*My yard consists of roughly 3.5 acres of "mowable" area with several small hills **Bestfor.Garden** also recommend and valleys and tree-beds scattered throughout. Not only did the mower do a great job, but at the end of cutting the entire lawn, I STILL had 35% left on the battery.*
Lots of great advice. I hate mowing (2 yards) but ready to get our mower serviced and ready to mow. Thanks for the helpful information!
Time stamps
0:13 Tire pressure
0:22 Anti-scalp rollers
0:51 Deck belt
2:36 Cutting blades
3:38 Adjusting the mower deck
5:30 Caster wheels
5:49 Air filter
6:52 Greasing caster wheels and deck spindles
7:27 Changing engine oil
8:57 Cleaning
Great info! Wish I had seen this video before I bought my zero turn. #Z248F #Husqvarna #zeroTurn
Thank you for this video! I needed all of this for my mower.
Replace pump pulley and fan?
Good video I used it as reference when leveling my deck and servicing my mower. Very informative and easily explained. My mower is once again running top knotch and cutting leveler than ever, Thanks Husqvarna I wish customer service was a little better but all in all good products. I have Husqvarna weed eater, chainsaws, edgers, blowers, push mowers etc. happy customer with quality. Thanks David P.S fix customer service and u got it
need video or help on how to get air filter cover off seems to be stuck no matter where I turn the release knobs
How does one pull the flywheel on a 19hp Briggs&Stratton on a Husqvarna Z4824 Zero-turn mower?
This is not the deck belt configuration I need. Do you have a photograph or video of deck belt replacement for the RZ3016?
When describing the adjustment to the "lift link" adjustments are listed a turn clockwise to lift and counter-clockwise to lower. I am confused by this because the lift link is perpendicular to the ground. To make this adjustment am I looking at the "clock" from above or below the adjustment link. My instinct tells me to adjust from right to left to raise. Is that correct?
To whom it may concern,
Me and my family are Husquvarna loyalists. We are committed to all things be of good quality with equally good customer service.
That said, we were in need of a lawn mower built to take the rigors of the home and farm. We choose the Husquvarna MZ61 Zero Turn lawn mower. Costing us $6,190.43; clearly a serious investment. The dealership, Speed’s, in Defiance, Ohio, explained we should order in the fall of 2022 to receive by February 2023 (give or take). I have come to find out that I am not the only customer to have this experience. Two other customers waited, respectfully, one 8 months and a second 1 year both for chainsaws.
We took out a loan, began paying and as of now, Sunday, April 23, 2023, we have no lawn mower. Grass knee high we have had to resort to spending money to repair a broken down Craftmans riding lawnmower which quite frankly struggles; we dare not push it beyond the front yard for fear it will stop altogether.
We have been in constant communication with our dealership, Speed’s. They have been very nice, explaining the days and times in which they communicated with Husquvarna. They too are at their wits in. Communication with Husquvarna is limited with little to no clear indication as to when it will be delivered. ETA’s come and go with regularity as though time and the product is of no concern. Contact with Husquvarna is nearly impossible, something I certainty never experience before but has become a main staple in how it conducts business. So-called email or online chat for customers is a complete waste of time. It’s a joke. The customer is directed to use these forms of communications only to be cut off. Start a new and it cuts the customer off again. This is not how an established company should operate and expect to stay in business.
Husquvarna is making their delearships look bad. Husquvarna has expended the dealerships and customers good will and patience beyond their limits. Anger has replaced disappointment.
What is Husquvarna as a company if those dealership and customers cannot contact it by phone, then who or what are they? Husquvarna was once a hands-on easy accessible friendly company. It has become a shell of its former self. Now unreliable ghosting those who support its very existence.
Needless to say, I have a commitment to purchase, took out a loan for which I am paying, acres that cannot be mowed, a dealership who is stressed and in fear of losing business and anger building up with no recourse.
The pandemic is over. Life as we knew it is returning… has returned. The rhetoric in which companies are using part shortages is no longer excusable. Shortage of employees is no longer acceptable.
It’s time Husquvarna step up to its commitments. I certainly did. The dealership did.
SPEED’S AND OR I NEED A FIRM DATE OF ARRIVAL BY WEDNESDAY APRIL 26, 2023! Otherwise, I will have no choice but to contact The Ohio Attorney General, The Ohio Department of Commerce, Better Business Bureau and my attorney.
Husquvarna in my opinion is deliberately hurting consumers and dealerships, who have served their communities; seriously jeopardizing dealerships good name and reputations. It’s wrong.
Sincerely angry and disappointed, Glenn West. Oakwood, Ohio.
Any aftermarket mini fender attachments for keeping the front tires from kicking grass on the deck? These things are horrible at doing that had one catch fire my father in law made some out of golf cart front mud flaps
how to check level of oil in husqvarna z246 hydro pump?
how do you change Change hydraulic pump oil and filter on Husqvarna RZ 3016 mower?
Thank you for the video.... I can see I have been doing all wrong. Time to make a change..Appreicate it.
What Would Make Just One Wheel Pull & Not The Other I Have Put On New Belt & Idler Z254 Husqvarna
What size oil filter and spark plug used on husqvarna rz46215 46 inch 2014 21.5 hp zero Turn
broke the right side handle were it connects to cast connection. cast snapped. how do i replace.
I have an MZ61 zero turn mower. The expansion tank of the transmission fluid is empty. Do I need to fill it with 20W50 motor oil to the COLD LEVEL line?
Does anyone know what the highest deck position is on the RZ5424. My mower deck doesn't adjust to 4.5 inches like I've read.
is there a video showing how to replace a RZ 3016 clutch cable
10w30 or 30SAE I use SAE 30 everytime but I live in the south.
And if u have the KOhler 23hp it takes 48 ounces about 1 1/2 quarts. DONT overfill
I'm wondering if anybody has a RZ 54 24 could you please look under the seat and tell me what size those two fuses should be.
I thought you clean the grass off ideally after each use. The video says not to clean while hot. The mower is going to hot after use. So are you saying let it cool off then wash?
The one video I really need to see and it won't play. All the three other videos will play except this one! has this been removed??
Is there a video showing how to adjust parking brake?
we use 30 or 10w30 about a quart in halve
Anyone eles have camshaft issues with this model my motor is locking up when I try to start it
thank you sir
sounds like u have a hydraulic problem if its under the 3 year factory warranty I would go to my local Husqvarna dealership. If not make sure your drive belt is in place correctly your belt could be to lose or either came off
how to adjust brakes on a husqvarna zero turn
Is there a video on how to replace the battery?
AJ Jiménez I
For the love of all that's good what belt do I use?
check your old belt for a measurement or product number
Instructions for type of oil, etc are in the manual for the engine, not the mower itself.
I read it takes 15w50 mobile1
they don't have a video showing how to change battery on a RZ4623??
LIft seat, remove hold downs, remove cables (positive first usually), then remove battery.
almost impossible to do with the deck in the way. I cannot start the nuts back on the hold down not enough room with the deck in the way.
Hi Kohler motors use 10W30 oil. Regards, Power Equipment Discounters.
actually mine uses straight 30
love this video but i would like to now where to get the tool to check the hight
www.google.com/search?q=mower+blade+height+tool&tbm=shop
Hi, will the mower come with the height adjustment tool?
Thank you so much. This save me about $300.00 a pop, when I take it to the dealer, who I love dearly. Just changed my blades by watching this video. Again...THANK YOU!
In this video in the section on removing the blades, the presenter is turning the socket wrench clockwise, not counterclockwise--as he wrongly says. This is a grievous error. Even the owner's manual for the RZ series that I have has this same screwed up (pun intended) error.
It depends from which side of the fastener that you're looking. Typically when instructions say to turn a fastener CW or CCW, it's referring to the wrench's vantage point, and it kind of assumes that you're looking at the fastener from the ratchet side. Perhaps he could've been more clear about it, but from conventional technical instructions, what he says to do is correct. One way to avoid confusion in the future is: for standard right-hand threaded fasteners, open your right hand and point your thumb in the direction you want the the fastener to go with respect to its mate and then curl your other fingers in toward your palm, as if to make a fist. The direction your fingers curl is the direction to turn the fastener.
@@mrau92me depends on build when Chrysler made some of their cars the lugs spun the opposite way to remove them and people kept breaking lugs trying to get the tires off the car
@@RepublicOfTheWolfPackXanthera You didn't read my comment closely enough. Upfront, I stated "for standard right-hand threaded fasteners..." If Chrysler put left-hand threaded studs on their cars at some point, then my comment does not apply to that case. However, in the case of left-handed fasteners, you'd use my same instructions, except replace "right hand" with "left hand" and it applies.
wheres video for removing the battery hold down?
Thanks!
What kind of oil does this motor use ?
10W30
my steering sticks wont move the mower. they suddenly stopped working. My blades work fine but the mower will not move. Whats the problem?
Only my right stick is working how do I fix this
having a similar issue - one thing I noticed is that if you hit a bump, you can actually engaged the freewheel on the transmission disengaging your transmission. Look if that is the case by completely setting your mower in transport mode and then disengaging the transmission bypass. They're located at the back end on the bottom of your mower...good luck! think I need to purge mine and hopefully solve my own issue!
well 5 years ago you probably figured it out but its the drive belt. one side slips more for a bit then both sides slip and you have barely any forward momentum. New belt and make sure the tensioner is free.
When they assemble these things the hinge point of the idler pulley on the ground drive gets over tightened. The pulley gets bumped, won't go back, and you get steering trouble or it plain won't go. Belt slips. Where you need to look is under the seat. There's a spring that tightens the pulley. Loosen the bolts a bit, oil it, and it's good to go. Found this out the hard way. Thought it needed new belt.
Under lubrication, where are the grease points? Incomplete. moving on....
Can't get battery out of RZ 3016
Same here. It really sucks.
Have fun. It's a bitch. Took me 25 minutes.
Is this narrated by Mike Rowe?
No
Yes
maybe
Had to get the water out your gas tank on a Z254F
running to slow\
hahahaha he said dipstick instead of dipshit
This is worthless. How about going through the ENTIRE process before moving on to the next!?