Do It Yourself Musician #37 Tascam 122 MkIII Repair Part 3 SMD Capacitors

Поделиться
HTML-код
  • Опубликовано: 29 окт 2024
  • ХоббиХобби

Комментарии • 20

  • @garyjoseph9781
    @garyjoseph9781 3 года назад +1

    Excellent and helpful video. Easy to follow, comprehensive and to the point, thank you.

  • @davidnguyen5028
    @davidnguyen5028 Год назад +1

    Thank you so much for your video, I was able to get my deck fixed.

  • @wilbur1960
    @wilbur1960 8 месяцев назад

    Thanks for the tech session... about to play this game myself

  • @jked7463
    @jked7463 4 года назад +2

    Thx, learned alot. Look forward to hearing it.

  • @StillCloser
    @StillCloser 4 года назад +2

    I have two 122Mk2, I believe it has the same board, but I've replaced all the electrolytic by tantalum - They're small, don't dry or leak, are more stable with temperature, even lower ESR, the capacity remains the same for all frequencies... As long as we don't use the old formulation that was prone to short, I don't see why I'll have to go through the same ordeal 30 years afterwards...

  • @bobjerome5390
    @bobjerome5390 4 года назад +1

    hi have a tascam 238 i picked up of ebay on the 2 deck someone had tryed to re cap the pcb the caps were to heavy for the pad were the caps go
    the pcb IC'S were not working right as small as you can 4 mm x 6mm caps from RS 15 WATT SOLDER IRON works great
    in the end i had to pull out all the servo gear the repair to the servo motor pcb's was just to bad to fix i got the to deck working in the end

  • @evgkib1
    @evgkib1 3 года назад +1

    Hi, I just got the same deck and when I turn it on, the capstan motor seems like it's trying to reach the set speed but it can't and it's very noisy as well. Could it be the caps?

  • @tmbaz66
    @tmbaz66 5 лет назад +1

    Hi, I have a new special board, for model122mkiii , I installed it on a model 122 mkii but it's not working. Do you have a way to make it work? pls if you have any aidea

  • @henrymiller993
    @henrymiller993 4 года назад +1

    Hi man. Great videos! I have a 122mk3 that needs all the same stuff. Do you happen to have a BOM of the caps you bought from Mouser that you would share?
    Thanks!

    • @DoItYourselfMusician
      @DoItYourselfMusician  4 года назад +5

      Here are the parts I used. Mouser part numbers:
      667-EEE-HC1H1R0R
      661-BMVK250ADA3R3MD6
      667-EEE-HC1C100R
      667-EEE-HC1V4R7R

  • @leszekalbin4097
    @leszekalbin4097 2 года назад

    Super!🧐🤔👍🏻👍🏻👍🏻

  • @MEvansMusic
    @MEvansMusic 3 года назад

    is this similar workflow for the tascam 424 mk2?

  • @richierich9696
    @richierich9696 4 года назад

    Hi, I just purchased one . When I play the cassette it seems like it drags . The song plays slower than normal. Cap issue maybe??

    • @DoItYourselfMusician
      @DoItYourselfMusician  4 года назад

      Might just need alignment but it could be other things. Take it apart inspect, clean and lube the transport. See if that clears it up.

  • @jayn2022
    @jayn2022 3 года назад +1

    Just wondering what is the reason for changing the caps?

    • @DoItYourselfMusician
      @DoItYourselfMusician  3 года назад +1

      Those SMD caps from that era are known to fail. Probably not strictly necessary but I have seen units that had problems because of that.

  • @dankakalicha2969
    @dankakalicha2969 4 года назад +1

    I would have liked a video on the trimmers settings on the pcb because I touched them and disturbed ... You could do that to us in a 4th video ?

    • @DoItYourselfMusician
      @DoItYourselfMusician  4 года назад +1

      Yes I plan to do another video on the Tascam. I will try to address the trimmers.

    • @dankakalicha2969
      @dankakalicha2969 4 года назад

      @@DoItYourselfMusician
      Super !