Just received mine and water mist doest not coming out at all. i thought they sent a faulty product.thank you for the video. just fix the rubber sealent . i take it out and put it back properly and firmly. now its working fantastic. thank you
@@alex.k5057 Good day to you, my nano spray gun dropped on the ground can't functioning now 😭 The air the light is okay, but the motor can't suck the liquid out🤧
Please check you press that hose got leaking at front? Has water come out means water line hose is ok. Mist doesn’t come out mostly is air hose line not enough air come out with water hose.
Hi I Hope you can answer my question mine only squirt water after i turn it off. When i turn in on no water si coming out then if I turn it off water starts to come out. Thanks
@@yinpengsoh152 these hacks should do the job. as it doesn't maintain high pressure but enough to provide suction effect. 1. 3 sec glue the crack 2. white tape n cable tie the bottle neck. 3. hot glue / 2 tonne glue to permanently secure the crack. let it dry before attach it to the spray gun. goodluck
hello @alex.k! just got my k5 nano and no motor sound also.. but blue light lighting up. Any idea how to fix this? thanks! i tried charging it and same.
@@alex.k5057 Sounds so complicated to fix it. The blue light issue found out upon receiving it. Will be returning to seller. Appreciate your quick response ya. Thank you.
mine come with missing tube. i tried unused tube i found on my house but the circle things at the end of the tube, i not sure what it is. my spray machine not working
Means the air return back to bottle, maybe your bottle got crack or rubble seal not install properly? Or maybe front side head block the. The air return back to bottle got bubbles?
Hi sir... Mine is motor cannot stop running even turn off.... When on mode,all ok but when turn off motor still running but light already turn off.... Can u help sir??
Hi Alex, good day to you. I have checked and found that mine one is the hose keep dropping so only air coming out. After installing it probably still drop again for many times. May I know how to tighten it to avoid it drop again? Thank you!
@@alex.k5057 the hose that connects the bottle of the hand sanitizer liquid. It keep dropping after 1 round of spray. Not sure how to tighten it although I have tried cable tight and rubber band.
@@wongpakchen6191 you can use some knife cut out abit at the plastic place, make it become got some rough line. But you need slow slow cut, don’t make the connect tube brake or broken. U understand?
@@alex.k5057 good morning Alex. You meant after cut a little bit short of the hose and to make the rough line is inside the hose correct? The rough line to make it not so easily to slip and slide down from the connection tube correct?
K5 problem is the Hose Tip is Too Short, hence, the pipe will easily come out from the tip, you need to use a sand paper or tweezer to scratch little on the tip & then apply super glue & fix back the pipe & wait dry for one day, then, will be ok. Manufacturing Defects 😓😓😓
It is model K5? Or other products? Some of spray gun spray out many water. If K5, maybe got block at air hose or front side? Please try press the air hose let water refresh inside hose and head hole.
@@alex.k5057 is K5 model, will try press the air hose let water refresh inside hose and head hole ~ do u know is there any fake K5 or no? If yes, do you know how to check original or not?
@@bojio4569 At market too many fake K5. I think maybe original 1 is the words "Nano Spray Machine K5" is Print in body and no the sticker 1. My 1 I think is Fake. Because is sticker 1. I still finding original 1.
@@alex.k5057 i din try out press the air hose let water refresh inside hose and head hole, i go and replace another gun from the shop. Now the new gun want to turn on , need to press and hold the power button 2 seconds only can turn on. The words "Nano Spray Machine K5" is printed in body.
Just received mine and water mist doest not coming out at all. i thought they sent a faulty product.thank you for the video. just fix the rubber sealent . i take it out and put it back properly and firmly. now its working fantastic. thank you
Welcome. You need to becaful. The rubber sealant easy broken. I am trying find other rubber sealant to replace it.
Mine doesn't have
@alex.k5057 hello i just wanna ask if you had found replacement for the bottle sealant because i lost mine
I have this problem with my spray gun sanitiser will try your method and let you know
Terima kasih banyak-banyak, sangat2 berkesan, memang bergunalah video ni, thank you so much, syukrann2
Sama-sama☺️
Mine not working water didn't come out through. Much same as yours. Gun are difference comparison. I will try fix up the press pipe later.
Its working now found out that the connector is detached that is why its not working. Thank you!
It works! Thanks a lot!
thanks...your video help me a lot
Its works.. Thank you for good information..
Good. Thank you it works
Thank you so much,it worked,and the water came out more faster before this
Welcome
@@alex.k5057 Good day to you, my nano spray gun dropped on the ground can't functioning now 😭 The air the light is okay, but the motor can't suck the liquid out🤧
@@jadetan1973 please check your bottle got crack?
@@alex.k5057 Yes is crack, I tried your way to fixed it, can't functioning at all 🥺😭
@@jadetan1973 maybe you can try use glue to glue the crack place?
Recommended! It works for me, thanks!
Is works again. Thank you so much 😊
Thank you much,the technique also worked for me.
Hi Alex, I'm finding for Nozzle replazament, cause this device has broken in a home accident. Do you know somthing about that?
Sorry, this Nozzle dont have sale spare parts.
Mine got no sound and no water coming out. Is the motor spoilt in this case ? Seller said press 2-3 minutes also still the same.
Have light?
Yes got nano light
Just newly bought from shopee.
@@rosalindlee8806 should be motor problem, contact shopee warranty
@@alex.k5057 ok thank you
I need help why is my K5 spraying like a water gun but not a mist?
please check the air hose
I squeezed the hose like you did but the water still come out weak.. what should I do?
Check the bottle have close properly and the bottle upper rubber is good condition?
So we put plain water?
when u test is better you use plain water
Thanks dear 😊
Hi Alex, water came out only when I press the hose. If I don't press the hose, mist doesn't come out at all. Any way to fix it? Tq
Please check you press that hose got leaking at front?
Has water come out means water line hose is ok.
Mist doesn’t come out mostly is air hose line not enough air come out with water hose.
Hi I Hope you can answer my question mine only squirt water after i turn it off. When i turn in on no water si coming out then if I turn it off water starts to come out. Thanks
Please try it like my video. Flashing it 1st.
Sometime my 1 also like this problem.
Thank you 🙏🏼
I mean what kind of tools(or number of theirs any number) you used to unscrew..
Just a normal screwdriver (+)
@@alex.k5057 OK but it seems too tiny holes. Thank you
I need help for my hydrafacial
Yes?
yall can also check the bottle cap. mine got crack. seal the crack to maintain the pressure inside the bottle.
Please advise how to seal the crack ?
@@yinpengsoh152 these hacks should do the job. as it doesn't maintain high pressure but enough to provide suction effect.
1. 3 sec glue the crack
2. white tape n cable tie the bottle neck.
3. hot glue / 2 tonne glue to permanently secure the crack. let it dry before attach it to the spray gun. goodluck
@@ahmadsyahmi351 sorry, please advise how to glue
@@yinpengsoh152 you mix both hardener n resin together. plast it to the crack. then using a cable tie to tightenen it.
let it fullydry then try attach to the spraygun
Our bottle sealant is broken where can we buy a replacement?
Sorry. I also have finding any spare parts. This don’t have any spare parts sale. You just can modify it with other sealant.
Alternative bottle that are suitable?
You can try other bottle
Hey my nozzle is lose is hay the problem cus I press it and it spray but when I don’t it don’t spray
bottle loss pressure?
@@alex.k5057 idk bro but it’s so cheap made the red and black broke so I bought other but not a nano
Thx mine spray now
Use a properly charger & liquid.. Can make your equipment lasting.
I not sure. Still study it.
Ano ginamit nyo po pangtanggak ng screws
Sorry, can u write in english? 😊
hello @alex.k! just got my k5 nano and no motor sound also.. but blue light lighting up. Any idea how to fix this? thanks! i tried charging it and same.
You can try check the wire from board to motor?
Same problem with mine...
Same
Hello mine is working but its spray is like water gun.i expect it to be like nano mist spray what will i do?
You may try to press hose like me. Some times the air hose stucked, then water hose will come out more water.
Hi may I know need how long to fully charge. Mine is K6X
i use not fast charging about 2 hours
@@alex.k5057 for K6X the light will become green if fully charge?
@@teohyj1795 mine is K5, the light will become green if fully charge
@@alex.k5057 ohh I see
Can you use it on paper?
cant
what to do if its not spraying like mist but the fluid just comes out in a straight line? its not spraying correctly
Not correctly. Spray out straight line will be more water.
mine do not make any sound. i think the motor is problem, can u help me sir. THANK YOU!
i just buy this thing and never use it
May I know the purple light is ok when turn on?
hello @alex.k! just got my k5 nano and no motor sound also.. but blue light lighting up. Any idea how to fix this? thanks!
@@choosehandy657 please check wire to your motor and your motor 1st
My spray gun is without blue light, can this be fix? Thank you.
Maybe led light burn out? Or board problem? Fix it you need to replace parts with soldering tools.
@@alex.k5057 Sounds so complicated to fix it. The blue light issue found out upon receiving it. Will be returning to seller. Appreciate your quick response ya. Thank you.
Hi Alex what to do if the water is noy going up?
Please check your bottle and hose 1st
Hello, I've pressed the hose and water came out but the spray is still not working, or can i send you the video of my spray gun problem to you?
Did you check your bottle rubber sealant? How u send to me the video?
@@alex.k5057 Hello what will I do if the rubber sealant is broken/ loose
@@darylllopez3339 try to modify some rubber become that sealant. Because it did not sale spare parts
Much appreciated for the tutorial video
Olá tudo bem? Meu Nano Spray está saindo muita água, um jato muito forte (depois que tirei a borracha e coloquei de novo)
hi alex , my k6X mist is not fine(more like water droplet) any way to fix ?
Please check your air hose is ok? (Means I comment to press that hose)
@@alex.k5057 ok will try later thanks
What's the charge's color when charging or when fully charged ?
When charging is RED, Full Charging is Green
Hi, is it working when it is charging?just red color but when I press the bottom its not working..tnx
@@elenakabugatan4402 my 1 when charging red colour still can working
Is this steam
No steam sir
mine come with missing tube. i tried unused tube i found on my house but the circle things at the end of the tube, i not sure what it is. my spray machine not working
Please check your motor working or not 1st?
Then check all tube connect?
Then check bottle got crack?
Then check bottle upper rubber seal is ok?
Hi, mine was blowing bubbles inside the bottle and not spraying
Means the air return back to bottle, maybe your bottle got crack or rubble seal not install properly? Or maybe front side head block the. The air return back to bottle got bubbles?
Hi sir... Mine is motor cannot stop running even turn off.... When on mode,all ok but when turn off motor still running but light already turn off.... Can u help sir??
Control board problem? Got contact your seller?
Control board problem tu
Is the UV light replaceable? If it is, how do you replace it?
I think can replace it. I havent do it before. Because I don’t have soldering tools.
How do you adjust the size of the mist spray?
This model can’t adjust
sir, where to buy sprinkler for k5 nano spray? mine got broken😒
Please contact your seller
Hi Alex, good day to you. I have checked and found that mine one is the hose keep dropping so only air coming out. After installing it probably still drop again for many times. May I know how to tighten it to avoid it drop again? Thank you!
You means the hose inside the bottle always drop?
@@alex.k5057 Yes. When connected it and spray 1 round then it drop again.
@@alex.k5057 the hose that connects the bottle of the hand sanitizer liquid. It keep dropping after 1 round of spray. Not sure how to tighten it although I have tried cable tight and rubber band.
@@wongpakchen6191 you can use some knife cut out abit at the plastic place, make it become got some rough line. But you need slow slow cut, don’t make the connect tube brake or broken. U understand?
@@alex.k5057 good morning Alex. You meant after cut a little bit short of the hose and to make the rough line is inside the hose correct? The rough line to make it not so easily to slip and slide down from the connection tube correct?
Te pasa que no absorbe el agua?
Al contrario la expulsa y hace burbujas
My unit doesn’t work. Tried charging it for half day, still no light, no nothing.
when charging got red light? if got red light, mostly is battery problem. if not light motherboard problem.
I applied all the solutions but still not spraying but only air comes out
Please check hose at bottle side has come out?
Mine is really loud when using and no water at all just air, tried all of your techniques but didnt work at all 😫😫
Please check bottle oil seal?
Yes i did, but it still doesn't work, i did everything in your video, its not even sucking water in the bottle not a little bit
@@chaisoe like this final is contact your seller
Same mine, not even sucking water
Solution is coming out from the nozzle instead of fog . How to fix it?
Sorry I don’t understand
after charging the device, it cannot power on anymore. any idea?
This you need contact your seller. Mostly is board problem or battery problem.
When you continue charging. Got charge light on?
@@alex.k5057 hi, I got the same problem.i charge the machine it direct show green light.however after unplug cannot function
@@tehzibin1368 motherboard problem I think.
at first it was red lighr, but then after a few second it already turns green.
@@rusaimiamira4962 please contact your seller or make warranty. Don’t always try charging. Later battery burn off.
Nano machine not hot water ??
no hot water
Why my k5 was leaking out from the hose head, then keep leaking when spray
The hose got crack?
K5 problem is the Hose Tip is Too Short, hence, the pipe will easily come out from the tip, you need to use a sand paper or tweezer to scratch little on the tip & then apply super glue & fix back the pipe & wait dry for one day, then, will be ok.
Manufacturing Defects 😓😓😓
my gun spray out like water instead of nano , is this can be fix?
It is model K5? Or other products? Some of spray gun spray out many water. If K5, maybe got block at air hose or front side? Please try press the air hose let water refresh inside hose and head hole.
@@alex.k5057 is K5 model, will try press the air hose let water refresh inside hose and head hole ~ do u know is there any fake K5 or no? If yes, do you know how to check original or not?
@@bojio4569 At market too many fake K5. I think maybe original 1 is the words "Nano Spray Machine K5" is Print in body and no the sticker 1. My 1 I think is Fake. Because is sticker 1. I still finding original 1.
@@alex.k5057 i din try out press the air hose let water refresh inside hose and head hole, i go and replace another gun from the shop.
Now the new gun want to turn on , need to press and hold the power button 2 seconds only can turn on. The words "Nano Spray Machine K5" is printed in body.
@@bojio4569 woh! Like this maybe is original? Where u buy ? Can let me know? And how much is it?
i just discovered that mine doesn't have water sealant:(
Try find O-ring at hardware shop?
the machine quite
I'm scared that I might destroy it haha
Just buy come back no working
Lousy product
Many problem right