My GAAAAAWD guy…. Maybe repeat your thoughts a few more times lol 😝 I used Teflon tape on the adapter retaining nuts ( same kit for Tenacity DB pro ) Holding strong so far- several ripit sessions on 2S …. Thanks for your efforts!
@@rcguygarage I'll eventually try that on my maxx once I switch out my servo (going to 2085x). Not going to lie that Big Rock looks fun as hell, thing is a little beastie beast. With water in that receiver box it sure did have a mind of his own there for a bit haha.
As a newcomer to the rc hobby its sort of confusing when you see "waterproof" on the box when its clearly not the case. Would you say they are more water resistant than actually water proof?
I bought these hex adapters and they’re binding! You have any issues with that during your install. My metal bearring hubs wouldn’t work. Switched to stock beating hubs front and rear and they’re still binding. Not as bad but I don’t like the way it feels.
Cheap China junk one that worked better but then realized trying to put 17 mm hex wheels on the big rock was an absolute waste of time and thought because then it overdrives everything about the truck
@@chrismagallanes8858 unknown as I have no idea exactly what you bought I just know what I did and then like I said realized that it was a big waste of time going with 17 mm for that particular truck because it overdrives everything about it It wasn't worth it It took the fun away
🚘🚘. Great addition,,,I did the same thing only with hot racing 17mm extenders,,,,,,,I also installed the hot racing steering rack,,,it really tightened up the steering,makes it real solid.....😀😀😀. Also the hot racing nut has much more thread,,going into the hex....😊 you can tighten a lot more because there is no collar on the the insert.....
LMAO haha that run away truck reminds me of good old days with nitro trucks. Throttle linkage broke apart on my Savage X SS and had to drive it full throttle with only steering until it ran out of gas - luckily I was in a field and could drive it in circles. Cheers brother!
@@kevinwilliams2720 yeah the only thing is that ended up not being it it was water got inside the receiver and pinned throttle wide open several times It turned out to be a great video for some fun content though 😂🤣
@@rcguygarage yeah im still watching and saw that part now. Wasnt sure if yoy had checked throttle. Thanks for the reply. I been watching a lot of arrma 3s upgrade videos. Debating making the changes slowly on granite
@@kevinwilliams2720 have you seen my Granite videos? I'm not trying to get watch time but I got to tell you the granite surprised the heck out of me the last few times that I had that thing out I totally thrashed it It is Band-Aided together and just keeps taking the abuse the abuse and abuse
Also got all three trucks in last month In a half big rock oldest then kraton and u just got typhon but small issue that I don't feel I should need to fix so sending back in fir new one
1st off. thanks for all your great vids, very educational especially for me, being that this Big Rock is the 1st RC-anything that I have ever owned. 2nd, since I already received my order from m2c (but haven't installed them yet) can you tell me where I can get that barrel nut and washers that you used? Thanks
@@rcguygarage so I checked my records, I placed the order on Mar.31, 2021, would you know it those were the redesigned ones? Thanks so much for your help.
@@rcguygarage It's a year later and I am looking at these. You are saying Mitch made them longer. I measured batch you got about 12.2mm so how much longer is the new center screw? Thx
@@rcguygarage Diff question. I do not have a GoPro but a cell phone. Do you have a link to something I can attach to my Spektrum DX5C radio for my cellphone to record RC bashes? Thx Sir
Maybe not the same reason, but I had my GoPro on with all the connections active (Voice activation, Connected to phone, connected to remote). All the sudden my Maxx wouldn't listen to me at all. It would go stop or not move at all. Eventually I turned off the GoPro and all returned to normal. Maybe coincidence, but I am cautious about what I got turned on with my GoPro now.
Your neighbors got a jammer out there messing with you!!! Batteries for transmitter? All serious though that could be very bad if you were out in public. Not good!! I received my M2C racing hex adapters yesterday. I need to figure out wheels. I was leaning towards the Kaiju tire but I think they're 2 big for daily bashing. They do look forward awesome and sound great as pizza cutters!!!! Nice rip!!!
@@Addicted_2RC Guy before you make your decision there is a video that scheduled to be released tomorrow at 6:00 a.m. for those kaiju tires and wheels meaning wrapping it in the backyard track had a little bit of snow but that last night we had a massive amount of snow so I'll be ripping the kaiju again today on like much deeper snow
@@rcguygarage That's a good truck, waiting for a good sale or roller, I'll metal diff it for 4s, Typhon 17mm axles and hex's, lower it also. I did a REDCAT Blackout 17mm wheels street car 49mph, DUKONO pro 17mm with Radix wheels 50mph.
knowing that nothing broke when that thing got away from you like crazy style climping trees lol that should prove the big rock is durable :) wow! fun video you did awsome guy how you handled that lI I would of let it just destroy it self
Man guy I was scared for you when that happened wow trouble with the bigrock crazy luckily my bigrock still seems great I have the hot racing pivot balls on the way and only other problem was the rear input gear stripped like 7 bucks back to ripping happily only thing I got my parts from amain and they came in perfect shape just takes a really long time to get my orderes there in Cali I'm OK ohio takes forever I just ordered a axial wraith from them almost 2 weeks to get it what the heck
Wow no nail magnet for a contractor. To find those parts.unless aluminum. Ps if you have a ham or cb overpowered in your area it will mess with your remote. I watch running near highway or antenna high off ground.
I'd recommend the tires I put on my mini maxx the proline lp trenchers 3.8.. there awesome tires for the maxx. Ive been hooked on proline tires ever since I have the 3.8 badlands on my kraton and the 4.3 badlands on my xmaxx. Sorry to hear you have had so much bad luck with your xmaxx. I had a esc issue with my maxx out of the box had to wait 2 weeks for a new esc. And my rear shock leaked on my xmaxx out the box. Keep up the great videos and hope you read this comment..
@@rcguygarage I ended up having to call horizon about that stl3 remote it was trash I bought a dx5c and bound it to the dsmr receiver that's in it and it worked fine after that but horizon was gonna replace the remote I told them to just send me an extra receiver since I bought the dx5c and they did but that remote is truly trash
@@rcguygarage I got the hatchet's for my typhon and the six pack buggy tires and the buggy tires are super sticky and I got proline sandpaw paddles and it's a beast with them on but it likes to snap driveshafts with them if ur not careful lol
"Hey bro.." "whats up brother?" "Man I lost something." "What ya lose man?" "Brah I lost umm well I lost uhh... Deez Nutz!!? Gotemm" 😂.. jk dude love the videos deff learn alot from ya brother
Why you comparing the Xmaxx to this little truck? I have the Granite BLX v3 and it's a great little truck, but my X-Maxx trucks are way bigger and more FUN and just as durable. And I send my rigs way higher than what I've seen you do
My 3s typoon did a runaway it went stupid crazy wide open cartwheels it did all kinds of stupid stuff it hit wheel of a car it's over I called horizon they said it was interference but I live in country nothing around so I got to send the typoon to horizon they going to go through it see what happed
DO NOT SELF RIGHT!!! I have been busting driveshafts and I'm almost certain it's because I keep self righting lol!! It's not good for the plastic driveshafts.
@@rcguygarage HR makes a bellcrank and pivot ball set. I'm going to get the pivot ball set at some point, after it breaks. I hit a huge rock! That's what knocked mine really loose. But it had some slop to begin with. I think it helps as far as bashing though.
That self righting thing your doing will ruin your diffs in no time. & ??? No need to lock tight with mine. You really need to contact me.I got something for you.
I also had the kaiju idea thinking i was original but its like a lot of us thought it and the rest agreed . When i went to purchase they were none! I rethinks this. Look it up yourself i think its the most savage you can make *rocky look and they do well on anything but tarmac . Duratrax c2 STAKKER MT in the rear ... duratrax c2 FAZE MT on the front ... **Rocky has evoloved into MEAN BEAN!! for real in rocks or gravel DO NOT stand anywhere near him hell kick you on the face *** with rocks! this is a legit warning it can and will cause damage to other things if handled improper!!
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
M2c is like diamonds to me! I can’t help but stare at my Kraton when I’m in the Rc room!
Some good stuff
M2C for the win all day!
My GAAAAAWD guy….
Maybe repeat your thoughts a few more times lol 😝
I used Teflon tape on the adapter retaining nuts ( same kit for Tenacity DB pro )
Holding strong so far- several ripit sessions on 2S ….
Thanks for your efforts!
I agree the barrel nuts could be longer but the thread lock does need time to dry. Here's to hoping mine stay on today!!
I put them wheels on mine last spring when i got the big rock. They look awesome and sound it too lol
Cool thanks I got the Granite yesterday its so tuff..
Cant you use that loctite water proof silicon sealant on that receiver box to completely water seal it?
Maybe but still should have checked
@@rcguygarage I'll eventually try that on my maxx once I switch out my servo (going to 2085x). Not going to lie that Big Rock looks fun as hell, thing is a little beastie beast. With water in that receiver box it sure did have a mind of his own there for a bit haha.
As a newcomer to the rc hobby its sort of confusing when you see "waterproof" on the box when its clearly not the case. Would you say they are more water resistant than actually water proof?
I bought these hex adapters and they’re binding! You have any issues with that during your install. My metal bearring hubs wouldn’t work. Switched to stock beating hubs front and rear and they’re still binding. Not as bad but I don’t like the way it feels.
Unfortunately I ended up dumping these pieces of junk 👍💯
@@rcguygarage which ones did you buy after?
Cheap China junk one that worked better but then realized trying to put 17 mm hex wheels on the big rock was an absolute waste of time and thought because then it overdrives everything about the truck
@@rcguygarage ah I bought some 17mm ones but the pin is bigger so the 12mm and the 14mm doesn't use the same pin?
@@chrismagallanes8858 unknown as I have no idea exactly what you bought I just know what I did and then like I said realized that it was a big waste of time going with 17 mm for that particular truck because it overdrives everything about it It wasn't worth it It took the fun away
Yard is looking great for the rcs
It's going to get better
That was insane!
Do the HR hubs stick out to far and leave you with less threads?
No, bearings and pin locations retain factory position.
🚘🚘. Great addition,,,I did the same thing only with hot racing 17mm extenders,,,,,,,I also installed the hot racing steering rack,,,it really tightened up the steering,makes it real solid.....😀😀😀. Also the hot racing nut has much more thread,,going into the hex....😊 you can tighten a lot more because there is no collar on the the insert.....
LINK?????
LMAO haha that run away truck reminds me of good old days with nitro trucks. Throttle linkage broke apart on my Savage X SS and had to drive it full throttle with only steering until it ran out of gas - luckily I was in a field and could drive it in circles. Cheers brother!
TOTALLY!!! YES
@@rcguygarage the slt3 controller has a throttle adjustment that needs turned down. Also recalibrate throttle end points
@@kevinwilliams2720 yeah the only thing is that ended up not being it it was water got inside the receiver and pinned throttle wide open several times It turned out to be a great video for some fun content though 😂🤣
@@rcguygarage yeah im still watching and saw that part now. Wasnt sure if yoy had checked throttle. Thanks for the reply. I been watching a lot of arrma 3s upgrade videos. Debating making the changes slowly on granite
@@kevinwilliams2720 have you seen my Granite videos? I'm not trying to get watch time but I got to tell you the granite surprised the heck out of me the last few times that I had that thing out I totally thrashed it It is Band-Aided together and just keeps taking the abuse the abuse and abuse
Oh no that's not good😂 Loving the frequent uploads🤟
great video glad to see the motor didnt cog much man dont understand what was with the throttle going with no stopping it
Wet receiver
I love my big rock what was the problem with remote
Did you receive a Spektrum STX2 with your big Rock or are you one of the fortunate people that got the STX3 ???
@@joeyfesta2042 stx3 also stx3 with kratom 6s and typhon 3s
Also got all three trucks in last month In a half big rock oldest then kraton and u just got typhon but small issue that I don't feel I should need to fix so sending back in fir new one
Damn I was looking for it after you hit the tree
So swag dude ty man
I saw the barrel nut fall out the second to last time you hit the tree
1st off. thanks for all your great vids, very educational especially for me, being that this Big Rock is the 1st RC-anything that I have ever owned. 2nd, since I already received my order from m2c (but haven't installed them yet) can you tell me where I can get that barrel nut and washers that you used? Thanks
If you have the REDESIGNED m2c 17s you will not need them🤪after a little chat with Mitch from m2c he made the change👍💯👊
@@rcguygarage so I checked my records, I placed the order on Mar.31, 2021, would you know it those were the redesigned ones? Thanks so much for your help.
@@rcguygarage It's a year later and I am looking at these. You are saying Mitch made them longer. I measured batch you got about 12.2mm so how much longer is the new center screw? Thx
@@ParcoUpchurch sorry I don't know exact but he added a couple more threads and that's all it needed with loctite
@@rcguygarage Diff question. I do not have a GoPro but a cell phone. Do you have a link to something I can attach to my Spektrum DX5C radio for my cellphone to record RC bashes? Thx Sir
Are the hot racing ones as good?
Not sure I might have to check them out
I just grabbed some the annoying thing is I live in UK and it's not easy getting upgrades I order most things from the states
Maybe not the same reason, but I had my GoPro on with all the connections active (Voice activation, Connected to phone, connected to remote). All the sudden my Maxx wouldn't listen to me at all. It would go stop or not move at all. Eventually I turned off the GoPro and all returned to normal. Maybe coincidence, but I am cautious about what I got turned on with my GoPro now.
I always had issues with GoPros on my Traxxas UDR and signal glitches
Was the receiver wire cut in this video? That's crazy to take off like that
I don't believe so.
Damnit! I ordered these hub adapters before seeing this! I hope It's not too late to cancel.
They do work. Patience with the loctite would help but I'd still like to see a longer barrel nut
Maybe the axle sticks out further without hot raceing stuff
No
What is the vehicle under your Limitless I think it is. The Armma on top shelf like an F1 type car one shelf down the white on black Fox vehicle
Losi Db Pro
Your neighbors got a jammer out there messing with you!!! Batteries for transmitter? All serious though that could be very bad if you were out in public. Not good!! I received my M2C racing hex adapters yesterday. I need to figure out wheels. I was leaning towards the Kaiju tire but I think they're 2 big for daily bashing. They do look forward awesome and sound great as pizza cutters!!!! Nice rip!!!
GUY THEY ARE PERFECT FOR ME!!!!!!
THEY RIP!!!!!!! yes there's a little body conflict BUT I could care less about that.
@@rcguygarage Kaiju tires it is then. Time to search for them. 👍👍👍👍
@@Addicted_2RC Guy before you make your decision there is a video that scheduled to be released tomorrow at 6:00 a.m. for those kaiju tires and wheels meaning wrapping it in the backyard track had a little bit of snow but that last night we had a massive amount of snow so I'll be ripping the kaiju again today on like much deeper snow
Great vid , I was worried for you when you got your hands near the tyres at full throttle 😱
What’s with the 12 adverts 😫
RUclips filling up the ad content BUT it's what PAYS the channel🤔😜🤪
@@rcguygarage ahh OK fair do’s , but that was deffo more than normally 🤷♂️
Right RUclips wants MORE MONEY
Do you know if they will work on the typhon 6s? I know they said 3s, just asking. Do you know if they make them for the 6s? Thanks
hi nice welche reifen sind das finde die nicht lg
You should have done the Typhon axle thing instead LOL!
I should have done LOTS of other things instead😂🤣
@@rcguygarage That's a good truck, waiting for a good sale or roller, I'll metal diff it for 4s, Typhon 17mm axles and hex's, lower it also. I did a REDCAT
Blackout 17mm wheels street car 49mph, DUKONO pro 17mm with Radix wheels 50mph.
knowing that nothing broke when that thing got away from you like crazy style climping trees lol that should prove the big rock is durable :) wow! fun video you did awsome guy how you handled that
lI I would of let it just destroy it self
Why did you not use his coupon
No coupons for RC GUY GARAGE!!!! He's a hack he doesn't get those.
Looks like it needs to be longer and definitely let the lock tight dry 😂😂😂
YEP!!! Could be the "KEY" but yes on longer barrel nut
Is that 3.8 tires on that truck?
You would think they would make them longer and also bigger but to lock wheel nut
Little longer yes
Are those 6061 or 7075 ???
And yours have no offset. 🤔
Do those make your stance any wider ???
Man guy I was scared for you when that happened wow trouble with the bigrock crazy luckily my bigrock still seems great I have the hot racing pivot balls on the way and only other problem was the rear input gear stripped like 7 bucks back to ripping happily only thing I got my parts from amain and they came in perfect shape just takes a really long time to get my orderes there in Cali I'm OK ohio takes forever I just ordered a axial wraith from them almost 2 weeks to get it what the heck
Hey man, I like your RUclips channel. 👍 👌 👍
Haha nice video man! I wanna put m2c adapter on my granite Durability of tire is good ?
I have removed the adapters
@@rcguygarage ohh ok
This is a calamity channel...
YEP! Takes all kinds thanks
Wow no nail magnet for a contractor. To find those parts.unless aluminum. Ps if you have a ham or cb overpowered in your area it will mess with your remote. I watch running near highway or antenna high off ground.
Those tools are with the guys in their truck not with the boss hoss I just keep a pen for writing checks
Wife - "why in the hell did you buy a metal detector" Me - "watch me work"
GUY I WAS LITERALLY LOOKING AT THEM WHEN I WENT IN🤣😜🤪🤣😜🤪
BINGO-hairdryer time😂🤣-let them dry a week after that bath
🤔😜🤪NOPE
This made Trash bag feel a little better I’m sure lol 😂
Sorry guy but bout time that poor big rock bit back with the way you’ve been treating it lately 😂😂
I'd recommend the tires I put on my mini maxx the proline lp trenchers 3.8.. there awesome tires for the maxx. Ive been hooked on proline tires ever since I have the 3.8 badlands on my kraton and the 4.3 badlands on my xmaxx. Sorry to hear you have had so much bad luck with your xmaxx. I had a esc issue with my maxx out of the box had to wait 2 weeks for a new esc. And my rear shock leaked on my xmaxx out the box. Keep up the great videos and hope you read this comment..
Those tires sound great.
They RIP for sure
@@rcguygarage I ended up having to call horizon about that stl3 remote it was trash I bought a dx5c and bound it to the dsmr receiver that's in it and it worked fine after that but horizon was gonna replace the remote I told them to just send me an extra receiver since I bought the dx5c and they did but that remote is truly trash
Oh thanks for that I haven't laughed that hard in a long time
Hi could the +5mm mean that you need to have a +5mm Axel if there is such a thing for the nut to have more bit on the threads
HA HA!! KAIJU TIRES ON A BIG ROCK GOOD ONE!!!
KAIJU EVERYTHING
M2c hex 🤔🤔😳😳
Nice one ☺️ " tuff cookie 🍪
Ain't the bolt that goes in end saposed to lock wheel nut
No
Shoot that was happing to my buddy as well with his remote control
As a mechanic you should have know to let the lock tight cure . Probably would not happen guy😎
Nope🤔😜🤪 Ima go against the grain kind of guy always have been. BUT this is ONLY my opinion on what I see. Barrel nut needs to be longer.
I got their new invoice, not long ago, it wasn't that nice of an invoice. That's better, as far as small details, I think.
Yes
2.8 duratrax six-pack be perfect there a little smaller than the redcats
YES!!!!!!!
@@rcguygarage I got the hatchet's for my typhon and the six pack buggy tires and the buggy tires are super sticky and I got proline sandpaw paddles and it's a beast with them on but it likes to snap driveshafts with them if ur not careful lol
So many wtf moments in this video
YEP just grab some popcorn SIT BACK and WATCH THE SHOW 🤣😂🤣😂
That truck is. Possessed lol
I was looking for Indian burial artifacts
@@rcguygarage haha 😄
"Hey bro.." "whats up brother?" "Man I lost something." "What ya lose man?" "Brah I lost umm well I lost uhh... Deez Nutz!!? Gotemm" 😂.. jk dude love the videos deff learn alot from ya brother
Why you comparing the Xmaxx to this little truck? I have the Granite BLX v3 and it's a great little truck, but my X-Maxx trucks are way bigger and more FUN and just as durable. And I send my rigs way higher than what I've seen you do
🤣🤪🤣🤪right👍
@@rcguygarage It's just my opinion bud. Thanks for the video.
@@joseCalderon1976 it's all just fun and good times. That's all I'm here for as I'm sure you are too👍
Saposed to turn car off first then radio
Right either or
What's so funny
LIFE
My 3s typoon did a runaway it went stupid crazy wide open cartwheels it did all kinds of stupid stuff it hit wheel of a car it's over I called horizon they said it was interference but I live in country nothing around so I got to send the typoon to horizon they going to go through it see what happed
%10 off any savings helps
M2CCOUPON for M2C gets 10% off
Llo tengo ese problema también
I no this is old video. I use hubs off my revo 3.3 they fit n work perfect
I try and let that locktight dry
DO NOT SELF RIGHT!!! I have been busting driveshafts and I'm almost certain it's because I keep self righting lol!! It's not good for the plastic driveshafts.
You should catch up with the videos😉
@@rcguygarage I hardly have time to watch haha! I'll usually just catch whatever im searching for or whats recommended at the time 😂
Well thank you for at LEAST taking the time to comment TWICE👍💯👊
@@rcguygarage Hey im subscribed now. You're welcome 😜
Why doesn’t anyone just put a damn lock nut with the rubber on the inside on it on the outside
Yeah! ..... What did he say?
Junk bellcrank and pivot balls...mine is the same.
Hot Racing little bit different but the issue was the FULL THROTTLE tree hits. I adjusted toe now it's GREAT
@@rcguygarage HR makes a bellcrank and pivot ball set. I'm going to get the pivot ball set at some point, after it breaks. I hit a huge rock! That's what knocked mine really loose. But it had some slop to begin with. I think it helps as far as bashing though.
Look like wheels to thick but barley on
Your bill read taxes excluded I wonder way???🤔
RUclipsr discount🤣😜
That self righting thing your doing will ruin your diffs in no time. & ???
No need to lock tight with mine. You really need to contact me.I got something for you.
Right!!! Plastic gears don't like abuse BUT that's why my channel is here. If you do THIS to this, THIS will be the result 🤣🤪🤣🤪
I also had the kaiju idea thinking i was original but its like a lot of us thought it and the rest agreed . When i went to purchase they were none! I rethinks this. Look it up yourself i think its the most savage you can make *rocky look and they do well on anything but tarmac . Duratrax c2 STAKKER MT in the rear ... duratrax c2 FAZE MT on the front ... **Rocky has evoloved into MEAN BEAN!! for real in rocks or gravel DO NOT stand anywhere near him hell kick you on the face *** with rocks! this is a legit warning it can and will cause damage to other things if handled improper!!
3 times lol
Who are you to dog on m2c lol
Oh just your hacker back yard mechanic who knows a thing or two cause he's seen a thing or two👍💯👊
Hahahaha
Metal detector