## Need FPV Help Download AskFPV Android: play.google.com/store/apps/de... IOS: apps.apple.com/us/app/id15338... ## FPV Social Media Platform 1. Grow your FPV Following 2. Want to Buy Used FPV Equipment 3. Want Sell FPV Equipment & Services 4. Want to Win Free FPV Gear Checkout FPV Social Network Site: fpvconnect.app
When I go to "Receiver", nothing happens. I switched the channel map, but still nothing. It was flying fine a couple days ago, and I crashed it into the grass (from about 5 feet up). Didn't think it was a big deal, but it hasn't armed since. Any idea what I should try??
Hi Sam I have a Ragging Droner 6s and I just replaced the motors and I can't get it to arm now. I didn't know how to check to see why it wouldn't work. Thanks again for the information on the CLI status, now I have a chance to get it working. Thanks again for the help
My understanding is 'paralyze' is used in a race environment to completely disable a downed quad from the radio, making it safe for anyone to pickup. You need to unplug the battery to reset it.
Hey DroneMesh i watched your video and i have a problem with my hglrc Arrow3 4s where i updated the Firmware and now when i type into the CLI tab diff all bf kicks me out. When i flashed my board i got a "Programming successful" alert and i did back up my old fw but now i dont have any of my settings like Angle, acro and tbe arm switch is not working. I typed in "status" in the cli and i got back this: Gyros detected: OSD:None Arming disabled flags:NOGYROS, 4XLOSS, BOOTGRACE, CLI MSP. I tried reloading my old fw but had no luck. Im new to this stuff but i did 1 successful firmware upgrade with no troubles What do you think is going on and what should i do?
Bootgrace is important. Thats the code im getting after rotating my fc and remapping my motors. I know the beeper was on c15 which motor 1 was on but motor 1 is now motor 3. Maybe thats it. Also when i go to motors tab only motor 1 and 2 show up highlighted and motor 3 and 4 show no direction and buttons are not clickable. Please please help
In betaflight after setting the arming in mode when I switch to arm I get a red square which says arming is disabled all other functions are okay. Cannot get the motors to turn on
@@DroneMesh I've had a few flight controllers where the osd doesn't work and it's difficult for me to determine if it's the vtx, the FC layout, betaflight, etc.
Post this on AskFPV with the FC's your having an issue with and the community will answer you in no time. ASKFPV is available in the description under the video. I will look into it and see what kind of video I need to make.
First arm after flash / set uo throttle full for few seconds then down for few seconds thats calibrated then will arm. Visual warnings flash in osd. Thats it. Its not an error.this is the one that catches my mates out rpm throttle calibrate
Every time i flash 4.2 wont arm until throttle up full(while disarmed). Wait throttle down then arms. Thats all i am saying. Historically dshot doesn’t require calibration but it seems to ask this way. Thats if of course youve covered all other pit falls that you seem to of covered pretty well. The weird thing you havent seen before could well be this feature.
Many people reported rpm lock out on boot then get round it by unplug and so on. If you get rpm lock out try full throttle wait for visual beeper to flash in osd then throttle down then it arms without unplug lipo. After this it seems to go away. Well for me anyway. Lol.
Bro GPS rescue was enabled but I took it off and it armed I got into the air but crashed but now I can't get it to arm at all....can I just set the quad to default help me lol
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
## Need FPV Help Download AskFPV
Android: play.google.com/store/apps/de...
IOS: apps.apple.com/us/app/id15338...
## FPV Social Media Platform
1. Grow your FPV Following
2. Want to Buy Used FPV Equipment
3. Want Sell FPV Equipment & Services
4. Want to Win Free FPV Gear
Checkout FPV Social Network Site:
fpvconnect.app
This is Best video about "won't arm" on RUclips! thanks
When I go to "Receiver", nothing happens. I switched the channel map, but still nothing. It was flying fine a couple days ago, and I crashed it into the grass (from about 5 feet up). Didn't think it was a big deal, but it hasn't armed since. Any idea what I should try??
Hi Sam I have a Ragging Droner 6s and I just replaced the motors and I can't get it to arm now. I didn't know how to check to see why it wouldn't work. Thanks again for the information on the CLI status, now I have a chance to get it working. Thanks again for the help
My understanding is 'paralyze' is used in a race environment to completely disable a downed quad from the radio, making it safe for anyone to pickup. You need to unplug the battery to reset it.
Great video, Sam! Thanks a lot! 😊
Stay safe there with your family! 🖖😊
Thanks for sharing. I got the fault on CLI status, "Arming disable flags: BADRX CLI MSP ARMSWITCH" The drone won't arm, Can you help please?
Same here
@@chrismagallanes8858 I chose a different channel for arming and that fixed it.
@@محب-ح4ي what about for the throttle
Hi, just a quick question. When using Throttle down, and yaw right to arm your drone, how long does it stay armed before disarming?
We use a switch no one does that anymore
Cheers, I'll use a switch!
Hey DroneMesh i watched your video and i have a problem with my hglrc Arrow3 4s where i updated the Firmware and now when i type into the CLI tab diff all bf kicks me out. When i flashed my board i got a "Programming successful" alert and i did back up my old fw but now i dont have any of my settings like Angle, acro and tbe arm switch is not working. I typed in "status" in the cli and i got back this:
Gyros detected:
OSD:None
Arming disabled flags:NOGYROS, 4XLOSS, BOOTGRACE, CLI MSP.
I tried reloading my old fw but had no luck. Im new to this stuff but i did 1 successful firmware upgrade with no troubles
What do you think is going on and what should i do?
Bootgrace is important. Thats the code im getting after rotating my fc and remapping my motors. I know the beeper was on c15 which motor 1 was on but motor 1 is now motor 3. Maybe thats it. Also when i go to motors tab only motor 1 and 2 show up highlighted and motor 3 and 4 show no direction and buttons are not clickable. Please please help
how do i tell what UART im supposed to use
So I have badrx clients and map armswitch
In betaflight after setting the arming in mode when I switch to arm I get a red square which says arming is disabled
all other functions are okay. Cannot get the motors to turn on
I have the same issue , please assist me
Same issue, what do I do? Please help
I have throttle cLi flag,
And when i arm it shows arm disable, please reply me
Dear sir I need your help
Can you do one trouble shooting osd?
What problem exactly?
@@DroneMesh I've had a few flight controllers where the osd doesn't work and it's difficult for me to determine if it's the vtx, the FC layout, betaflight, etc.
Post this on AskFPV with the FC's your having an issue with and the community will answer you in no time. ASKFPV is available in the description under the video. I will look into it and see what kind of video I need to make.
@@DroneMesh oh yeah, ok thank you
@@DroneMesh I'm kind of leary of the permissions but I'll look at it
First arm after flash / set uo throttle full for few seconds then down for few seconds thats calibrated then will arm. Visual warnings flash in osd. Thats it. Its not an error.this is the one that catches my mates out rpm throttle calibrate
What your saying is for PWM calibration.
Every time i flash 4.2 wont arm until throttle up full(while disarmed).
Wait throttle down then arms. Thats all i am saying. Historically dshot doesn’t require calibration but it seems to ask this way. Thats if of course youve covered all other pit falls that you seem to of covered pretty well. The weird thing you havent seen before could well be this feature.
@@noisy_boi_fpv_3920 I will look into it
Many people reported rpm lock out on boot then get round it by unplug and so on. If you get rpm lock out try full throttle wait for visual beeper to flash in osd then throttle down then it arms without unplug lipo. After this it seems to go away. Well for me anyway. Lol.
Bro GPS rescue was enabled but I took it off and it armed I got into the air but crashed but now I can't get it to arm at all....can I just set the quad to default help me lol
Flash ur fc again
Thanks for this. Will check it out!
thank you very much for this useful sharing, may all the best for you
Thank you doktor
@@DroneMesh thanks to you, i'll keep learning from your vids
Aetr 🤦🏻♂️😆 tried everything then realized my throttle was roll 👌🏻👍🏻👌🏻
great info!
Best.. run down
Nice video
Thanks 😎👍
Save save save save lol what’s up brother