How to Install Sheet Laminate on a Countertop
HTML-код
- Опубликовано: 4 авг 2020
- Laminate countertops are a great affordable option for your kitchen but often the laminate color starts to fade or the pattern/style gets outdated. If your countertops are still in good condition a great alternative to removing and replacing the countertops is to glue down a new sheet of laminate. This is also a great option when you have a countertop such as I did where the dimensions are custom and the lead time to get a replacement could be around 2 weeks. I will walk you through all steps of this project which will help you make sure your first time gluing down new laminate is a successful project.
Tools Used
1) Makita Cordless Router: amzn.to/2BS7h1O
2) Flush Trim Router Bit: amzn.to/2Xmar5C
3) Makita Cordless Circular Saw: amzn.to/2EI3fKt
4) Diable 60 Tooth Blade (6.5 inch): amzn.to/3fpRmp4
5) Hand File Set: amzn.to/3gqIwcb
6) Micro Side Cutters: amzn.to/2PwNJn7
7) Foam Roller and Tray: amzn.to/31gAT1F
8) Contact Cement: amzn.to/3k2aHk1
9) Floor Roller: amzn.to/3eWESsy
Tools Every Weekend Warrior Needs
Makita Corless Drill Combo Kit: amzn.to/2Jsw78j
Dewalt Drill Bit Set: amzn.to/2w0xAA4
Dewalt Screwdriver Bit Set: amzn.to/2UqTvK9
Craftsman Screwdriver Set: amzn.to/3bAsNEG
Eklind Allen Wrench Set: amzn.to/2wKDu8M
Pliers (4-Piece Set): amzn.to/2JlYUM7
Stanley Utility Knife: amzn.to/2Us2pqG
Stanley Tape Measure: amzn.to/2WPzr5K
Studbuddy Stud Finder: amzn.to/33SaZC4
Johnson Torpedo Level: amzn.to/3dzx5Ot
Stanley Hammer:amzn.to/39tudPL
Buck Bros Wood Chisel Set: amzn.to/2QTebYO
Klein Voltage Tester: amzn.to/2XMa1I2
Wire Strippers: amzn.to/2NHHKuS
Little Giant Ladder: amzn.to/2UrFmfG
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. 
Хобби
Not to bad but you did some flaws, you never file your edge band on a angle before your top piece goes on. After installing edge band and routing excess off keep your file flat on counter going in one direction towards the edge band and never pull file backwards while on edging, or you can chip outer edge. Keeping file flat makes a good sharp edge to glue your top piece to. When glueing the top edge band always put a thin layer of contact cement top of edge band, then when that dries come back and roll the whole area with a roller and cement, this gives a little extra glue between both surfaces. I always used Lacquer thinner for cleaning, or you can use paint thinner just takes longer. I am a professional Laminate installer and did this work for 45 years. By the way I use end nippers for removing laminate near the wall or a file.
Hey Barry, really great feedback and I appreciate you sharing your knowledge. Cheers 🍻
No problem.
@@barryinn1778 Yes Barry, thank you for your professional comments. One question I have is should one lightly sand the surface if going over the old laminate? When I watch you tube video's, I watch them and immediately cruise the comment section as there is usually a professional that comments on what was could be done better in the video if a professional did the job.
@@61spindrift should I sand surface first
What do you do with a laminate counter that water got underneath the seams and raised the particle board underneath. I want to put new laminate on top.
First helpful video I’ve come across for this type of install! Thank you for your clear instructions, lack of ramblings, and great video skills! I have way less anxiety about this now 🙏🏼
I thought i would have to get a whole new heavy counter. I never thought of just putting a sheet over old counter that was still in good condition, just out of style in color. Thank You for the video
Hey Sandy, that was the exact position I was in and super happy with the results. Best of luck on your project and let me know if you have any questions along the way.
Sandy, did you try it?
P
Yeah I got some old countertops in red Formica, thought about ripping it off but I could just do this. Most of it is still in good shape.
@@EverydayHomeRepairshow did it hold up 4 years later???
Thanks so much. Your video is right in tune with the project that I'm doing right now. I am building a tiny home in a Ram ProMaster. And I'm at the project of building a countertop for my kitchen cabinet. I appreciate you spending the time to develop this video and edit it and publish it for us to view. I will be sharing my video on Van life and Beyond. Your countertop build has been instrumental in my van build and I really really appreciate it.
best part of the video... that great idea using the old counter top base as a work surface! tilted angle lifts up long and short edges for saw cuts - BRILLIANT :)
OH my word! excellent video! I'm in the process of removing the tile from our kitchen counters and installing laminate sheeting. so excited to get started.
Thank you so much for the super informative and helpful video. We're in an unexpected kitchen remodel and are put at ease after watching this!
I'm updating a 1972 home and thought lamenting is affordable but I love the new designs and colors. Perfect direction. Thanks
You are so welcome!
Thank you. I know now I don't want to do this because I would suck at it, I thought it would be easier and you just saved me time ,money and my sanity.
Answered a lot of questions, personally. Thanks for a great, informative instruction on how to do this.
Thank you for taking the time to demonstrate how to install laminate on top of laminate great job
Good video, clear and informative, well done. When Im cutting laminate worktops with a power saw, I lay the worktop upside down to cut it. It eliminates any chance of chipping the edges and produces a nice smooth cut. Also, if using a jigsaw, the same method of cutting applies, as a normal jigsaw blade cuts on the upward stroke. Blades are available to cut on the down stroke, which would allow you to cut with the surface facing upwards.
Perfect. Just what I needed for my install. Direct andTo the point. Thank you
I bow down to you amazing free hand saw skills..
that’s some Jordan level talent
I did my Bathroom countertop and I loved it so much I'm doing the kitchen countertop too!
Thank you for this basic learning technique. Your teaching experiencing was easy to understand and you were patient. Even us "Women" can do this basic counter top addition to our surfaces.
'THANK YOU AGAIN!!!!!!"
It came out really nice, Thanks for your video.
Love this!! I’ll be referring to this once I start my kitchen!
This is great. Much easier than I thought because I thought I'd have to remove the old laminate. My only problem is needing to remove the sink and range top. I "think" I can just pry them up a little and start the bonding from underneath the sink/range edges. It gets very expensive to have a plumber and/or electrician come to remove these things and return to put them back.
Thanks.
Really helped with my bathroom vanity top replacement.
Bought some of your items and all I can say is Thank you very much for such a great video.
Thank you for this. I want to add a few thoughts/suggestions that I've seen from official installation videos for Formica.
1. If you are going over existing laminate you need to scuff it with sandpaper, thoroughly clean it with something like alcohol, and use a tack cloth to make sure nothing is left on the surface.
2. When adhering the laminate you should always start from the middle to make sure you don't get any bubbles. That way the air will be pushed out from the middle to the edges where the air can escape.
I'm going to have to do a project like this and I am nervous about it. All of my cassette and VHS tapes have crooked labels because I'm not good at lining things up. LOL. I will remove the countertop and take it down to my workshop before adhering the laminate though, so I won't have to deal with walls. The vinyl snips are a very good idea. Thank you for that. I will only have one front edge with walls on 3 sides so I'm lucky in that respect.
The links you included are very helpful.
Wait wait wait....you labeling VHS and cassettes in 2023?!?!
@@user-by9xn3ro2q LOL. No. But I did years ago. My skills with stickers/tape are still the same though. I get it stuck to itself or to me more than to where I want to get it stuck.
How did it go? Ever complete your project?
@@BrockHerrin Not yet, got a loooong list of things and other stuff keeps breaking or needing repair or medical issues come up. Hoping to get it done sometime next year. Almost finished renovating my own bathroom. Had to tear out rotten coverings on the wall, termite damaged tongue & groove board, put in studs because they weren't done right, add shims, install a new surround, new shower controls, new pex, new valve, and new showerhead. Next project will likely be the laundry room.
wow phenomenal video!!!! So clear & thorough in explaining the steps. Thank you!!!
very simple tutorial and seems easy to follow. thank you for all the angles and detailed explanation!
Could you inform me what's the type of glue plz? and glue brand name plz?
You did amazing. I’m really thinking of doing this is our home because ours is breaking apart and have looked for days for a video on this.. thank you so so much. It’s going to help me so much as it already has!!
Best of luck on your project!
Nice job and EXCELLENT detailed camera-work in this video.
great video. I use a dremel to cut end instead of side cutters. works great
This was a fantastic video!
Very thorough and I love the tool list.
Thank You Very Much!
Thanks for the kind words Jay, glad you got value out of the video.
I like it.
I much cost?
Back when waterbeds were the _in thing to have_ I made the frame from 2 x 6's. Even 55 years ago, you could get laminate relatively easy. The Weldwood contact cement was also available then too. The process was very easy to work with. If I remember right, I think the router bit was a 45* angle, adjusted properly for a smooth top, side, bottom edge. Even did the plywood pedestal the same way. It was a cheap way to make it look very nice. So, laminate has been around a *long* time and still has some nice uses for current day projects. Cordless router would have been nice, but my trusty Craftsman electric did a good job. It did pick up a little of the glue, so would have to clean the bit every now and then. There are sooo many patterns available now, moreso than years ago and it's even cheaper. Look it up and see all the patterns and colors nowdays.
I am to happy with the finish results 🥰
My sister and I just installed sheet laminate in the kitchen. Looks amazing!!!! Thanks to you!!!!
Awesome 👍👍
Is this laminate heat resistant? In other words, if a hot pan was accidentally placed on it, would it affect the surface?
Thank you. I appreciate your thorough instruction.
Finally getting into posting thank you messages on videos rather than adding to “liked” videos and saving for later projects, using likes as a “go back to” function. Super helpful in my build. Thank you.
Nice job! Just What I Needed For My Next Project.👍
Renovating an old house. My BFF told me Formica laminate sheets were crazy hard to install, suggesting I just go ahead and get a full countertop to set in. She said it would end up being cheaper. ....I think not. I can do this!
Exactly what I needed, thanks for the lesson!
No Problem, best of luck on the project!
Thank you! great help for the counter I am about to redo.
Awesome video. Thank you for being SO thorough with instructions and details. This will definitely help me to replace my old countertop. I will let you know how it turns out. Many thanks for your help.
Hi Maryann, thanks for the kind words and keep me posted on the progress or if you have any questions along the way. 👍
I am getting ready to replace ours thank you for your video is very helpful enough room to try to do it myself HD the router is very important for that
So glad my counters are rounded at the edges! I'm going to see if I can order this in marble, have it delivered, and try to get a good price for install. If they try to charge a fortune for such easy work, I'll do it myself - thanks to this amazing video!
Update?
Thank you so much for this great tutorial. You rock man !!!
Awesome, now I'm ready to take on my counter tops!
I took your advice on the Snips side Cutters. Those came in clutch.
Very informative. Lots of good tips.
Thank you. Short and clear that's what I'm exactly here for.
You're welcome!
💥Great video, thanks. Just a note to your viewing audience 7:52 you went in the wrong direction with the router. They spin clockwise looking down in it so you want to push that side of the bit into the work not along with it. At 4:02 you went the right way. 🤟🏼
He didn't discuss which way to run the router, unfortunately. At the 4:02 mark, he's going the "normal" way where the router spins out and away as he moves along. However the opposite direction referred to as "climb cutting" can be done and often is done intentionally to reduce the chances of the router damaging the edge. You have to be more careful because the rotation pulls the router in the direction you're moving. I use climb cutting to avoid tear out on highly figured wood. And I would probably choose that here for the same reason.
Great vid.....I can't wait to get started!
Thank you very much for the video. It's very helpful.
No problem, best of luck on the project!
Thank You. That gives me confidence
perfect video!
thanks for your time making this tutorial vid
Great video. I am about to change my desk top and this made it sound easy enough for me to try alone! Thanks!!!!
Nice! Best of luck on your project 👍
That's why I'm here too... my desk is WAY too 70's
Thank you! This vid really helps!
ive built 6 houses had no idea i could just cover over top the laminate ?? funny part is i have assisted the cabinet guy with new construction in homes i built 15 yrs ago . .Im retired now and was thinking of redoing my kitchen laminate my self . your video gave me the confidence to do this .
I am going to try. You make it so easy. Thank for sharing!!!
Take your time and that router is a must! Best of luck 👍
Awesome video man. You've inspired confidence in me.
Nice, best of luck on the project. I was happy with the results for this project 👍
Tiny bead of paint matched caulk along the walls to prevent pooled liquids from seeping, dripping, or wicking into the walls is a nice finished touch (especially with the wall being undercut for fitment).
Not sure if it would work in this instance, but for that small amount of extra laminate, perhaps using a heat gun or even a hair dryer may have been able to soften up the glue allowing you to just get a very flat blade under it in order to peel it off. I have used a heat gun on laminate in my kitchen and it only took a couple of minutes to soften up the glue sufficiently in order to remove it.
looks great thanks for the tutorial!
Thank you so much for this video!! I’m adding a new counter to my island and this was so helpful and I feel much better about doing it.
Would it be the same process to add the laminate directly to the wood?
Looks great - nice explanation!
Thanks, glad the video helped 👍
Awesome tutorial thanks!!
Great informative video
Thanks!
Thank you so much for this video
Very helpful. Thank you!
Useful video, thanks 👍
Well done! Great job!
Awesome video. Thank you!
Thanks for your video. You the man
great detail! I wish every DIY video was done this way! good grocery list too! problem is finding the laminant. I keep searching and getting crappy "sticky paper" results. I want REAL laminant sheets to cover bare plywood! mine is moldy and had to rip out the old laminante and belt sand the counter plyiwood off!
So helpful! Thank you!
Very helpful. Thanks.
This is exactly what I needed to see. I'm following this process exactly, except I'll take my counter top off so I can reach all sides, and my front edge is curved so I will need to clamp it somehow.
Nice, best of luck on the project and let me know how it turns out.
Thanks for posting about Breonna 9:52!
Looks nice,thank you.
Thanks Susy!
great install!
Thank you. Great video
I was about to go this route, but then I found precut laminate countertops for cheaper than the melamine by itself!
this is GREAT!
Great vid. Well done.
Great job!!!!
Thx Ronald!
Good vid. A Dremel with a rotary sanding bit or a reciprocating multi-tool with a cutting blade will also do the job of those snips.
Nice, I will try that on the next one. Appreciate the feedback.
Wow you did a great job wow
Great video! Very helpful. Not sure it was discussed but how do you fix chipped corner from router?
Thank you for share this information
You bet 👍
good tutorial and links.
Great video thank you! and best t shirt btw ;)
Wow, great job
Thanks!
Awesome dude!
Great video. I've been wanting to add a formica sheet on top of the formica counter top, but wasn't so sure it would work. But now i know. Question: where did you purchase the laminant formica sheet. Thank you.
❤i like, it was very simple ❤
Great job
Thank you so much
Well done !!
Great Job. TY for the Tutorial. My husband removed our laminate & I'm wondering if you can use a wood product instead of tile to adhere the laminate sheeting to?
Good technique.
Awesome video!
Thanks!
Have you ever placed this over a tile countertop? Or have a recommendation to prep a tile surface to do this?
Wonderful idea and great video. We have old laminate kitchen counters, so we'd place it in top of that. Is sheet laminate heat resistant, just in case a hot pan is sat on it?? Also, is sheet laminate something available at places like Home Depot, Lowes, etc?
Looks nice
Thanks Susanne!
Great info! We need to replace our kitchen counters, and they're laminate. I have a rounded edge on my counters. Could I do this project on rounded edges?