S&W 686 Level 2 trigger job (Part 2 Re-contour the trigger)

I'm Scott owner of Van Dorsten Custom Firearms and professional gunsmith. Join me for tips, tricks, And product reviews in the gunsmithing industry.
Smith & Wesson Revolvers
Level 1 Trigger/Action Job
The Level 1 trigger/Action job will give you a smooth, clean and light double action pull with a crisp 2lb single action pull. I start by polishing all interior components and then I hand stone the sear for that crisp single action pull. During this time I replace the hammer and rebound springs to reduce trigger pull weight and install an extra length firing pin for consistent never fail primer strike.
Price $95.00 labor. Parts $45.00
Level 2 Trigger/Action Job
The level 2 trigger/action job gives you all the features of the level 1 plus I hand fit a new cylinder stop and hand that are CNC machined from solid tool steel replacing the cast or MIM factory parts. Then I tune the cylinder making sure the crane is properly aligned, reducing end shake and install a crane detent lock for added support. Next I polish the chambers for smoother extraction and bevel the chamber mouths for faster loading. Last I re-contour the trigger so that it is smoother and more comfortable on the finger. And bob the hammer if desired.
Price $275.00 labor. Parts $100.00
Level 2 Extreme Trigger/Action Job
The level 2 extreme trigger/action job has all the features of the level 1 and 2 action jobs plus I replace and hand fit a new trigger and hammer that are CNC machined from solid tool steel replacing the factory cast or MIM parts. Giving you a solid no fail action that will last generations.
Price $350.00 Labor. Parts $375.00
Ruger revolvers parts and prices are different please ask. Parts prices are subject to change.
Van Dorsten Custom Firearms
Temporarily closed to relocate to Sheridan WY
[e-mail]
www.facebook.c...

[@johnreacher3756]

This is to state something that is almost too obvious, but is never actually stated.
When you are pressing a trigger (especially in double action) you are compressing springs and moving parts in the gun's action.
You can reduce your effort to move the trigger by replacing your current springs with weaker springs (that do not require as much force to compress).
When a part moves in contact with another part, there is friction. It takes force to overcome that friction. That force comes either from the finger moving the trigger or from a compressed spring getting uncompressed.
If you do not reduce the frictional forces, then the weaker springs may not exert enough force to move the part back into place (e.g., trigger reset). The result is that the gun may not work. The polishing of parts is important. Replacing springs is only half the job.
This is a well executed video showing you what you need to do. If you don't want to do everything Scott demonstrates, then read what he does for a level 1 trigger job and do just that.

[@Captkman]

I brought my S&W PPK/S to a gunsmith here in CT for a trigger job. Yay springs were changed, but a lot of parts were polished too. Very nice for my old disabled hands. While he had it I had him checker the front and back strap again, old hands. Glad I did. Made a nice gun even better for me.

[@bradslone8511]

I'm going to be doing a gunsmithing course three SDI. I'm sure you've heard of it before it's an online gunsmithing course and I can also get a degree in firearms technology. I've always wanted to be a gunsmith I find it relaxing to work on guns that are either broken and need fixed or they are already guns and I try making them better.

[@donnstambaugh1506]

Thanks

[@precisionmarksman5084]

Could you perform an extreme trigger 2 , on an X frame 4" 500 magnum? I do a lot of Double Action shooting with mild loads, and the S&W revolvers, even out of the custom shop, don't compare with the revolvers I had in the 70s and early 80s. That smooth D/A pull is just not the same. I think the crane detent would not be needed, due to the one they now install, but a real steel trigger, hammer, hand smooth as silk would be greatly appreciated!

[@vdcfirearms3609]

I believe that I can let do some checking on the parts and get back to you. And yes you don't need the crane lock. Send me a private message.

[@boostimalaka1]

@@vdcfirearms3609 Are you familiar with working on Colt Python Revolvers. I heard that the Python required maintenance over Five Thousand rounds. The hand was usually replaced or repaired.

[@dougharlow6037]

I have a question? Does't someone have a after market CNC rounded trigger? They have them for shotguns. Very informational video. Thanks

[@scottw550]

Yup

[@TheBigpappa160]

I just subscribed to your you tube channel! I just order a SW Model 60 and hoping to lighten up the double action trigger pull, seeing that this will be my carry gun. What is the normal weight pull on a the double action revolver right out of the box. I've hear anywhere from 10 lbs to 12lbs? Hope to learn some tricks! What's a good gun smithing books to get?

[@vdcfirearms3609]

Thanks for subscribing glad you enjoy the video. The pull weight on the J frames are about 12lb up to 14lb. The best book I could recommend for understanding the Smith revolvers is the Jerry Kuhnhausen’s book on the Smith Revolver www.brownells.com/manufacturers/HERITAGE%2bGUN%2bBOOKS/index.htm

[@taylorman1949]

do you grind off the edge on the back of the trigger too? it always pinches the meat of my finger at the end of a double action pull.

[@scottw550]

Yup