Installing 3rd function SCV control valve in a John Deere 4 series. Grapple controls
HTML-код
- Опубликовано: 21 янв 2023
- I install 3rd function SCV grapple controls in my John Deere 4066R and show the process. Sadly my machine didn't come with these controls from factory, so I bought the kit and installed it myself.
3rd SCV control kit as seen in the video: www.greenpartstore.com/John-D...
Our new merchandise: the-kelleys-country-life.mysh...
Our Patreon / tkcl
New podcast channel: / @kelleysoffscript
Our Facebook / the-kelleys-country-li...
Our RUclips channel / thekelleyscountrylife
Our merchandise, thanks for the support! www.bonfire.com/the-kelleys-m...
This is our Amazon store with affiliate links to the products we use on the channel. It doesn't cost you anymore and it helps support the channel, THANKS!
www.amazon.com/shop/thekelley...
View out other channel for outdoor related content such as fishing, boating and hunting! / @tkoutdoors
For business inquires please contact us at kelleyscountry@gmail.com
The Kelley's Country Life LLC accepts no responsibility for you trying anything you see on our show.
All links provided above may be affiliate links which earn us a small commission but don't cost you any extra.
Our address
6244 East Caps
PO Box 22
Lamont, FL 32336
Your description is very detailed. So easy to understand and follow.
Thank you
As always you did an awesome job with the grapple function install, the grapple modification and the video. You do a phenomenal job at everything that you do. That thing is going to get tons of use.
Thank you very much
Congratulations
Great job on the install. I've installed a ton of those kits on John Deere 4r series tractors. I can honestly say I don't think I could have done a better job. The kit does also work on open station 4r tractors as well.
Great to know
I have a 2006 4320 John Deere open cab do you know if they make a kit for that? I would like to put one on there but I don't want to use the aftermarket one.
Great job on the install! Grapples are a great tool, and investment for sure. You probably already know this, but your particular grapple is a rake grapple. Open completely, and dump or roll bucket cylinders all the way down, allowing the top portion of grapple to contact ground, then back up raking as you reverse. Really does a super job cleaning trash/ debris/ small limbs. 👍
Congrats!!! So glad you FINALLY got your grapple. I know you're going to enjoy using it.
Yes I am, it's so handy.
Sweet grapple. Nice instructional video. Hopefully it will help others out with an install. Thank you
Thank you for watching
That grapple will be amazing for your property. I am happy for you guys. 🤠
Thank you
Congrats Andrew! Looks great!
Thank you
Hi Andrew, man you can do anything and explain things very well. The Grapple looks fantastic and boy can it do the work, fantastic job. 👍👍❤️❤️. 🇨🇦
Thank you
Great video, Andrew. I'm sure it's gonna help some JD folks hook theirs up! That grapple is like another set of hands. Can't believe how wide the grip is. Your tractors become a whole nother machine! Awesome!
This thing is going to be amazing when it comes time to drop all the limbs I have.
Great job Andrew. I had my 3rd function installed before I picked it up at the dealership, but sure helps to know how to do it for future use. Good luck with the grapple.
Thank you for watching
That's awesome 👍
Hi, Andrew! The voiceover works well for me. Excellent instructional video. See you at 5:00.
Thank you for the feedback
Great job!! Now I know who to call when I get ready to bleed the hydraulic steering system on my boat!
That's actually a very easy process
@@TKCL I’ve done the “quick fix” several times, rolling the steering wheel as far to the left and right, and adding steering fluid. I’ve got a leaky seal, so I’ve got to to the full change out after I replace it
Yep that's for sure.
Good work Andrew. I did mine just the opposite, ran to the rear and made hoes to go to the quick connects in the middle.
One point is that there are o-ring seals for the solenoid valve where it is mounted to the loader valve. Yours appear to have remained in the loader valve so that is the seal. Sometimes they stick to the cap you removed. New seals are not part of the kit for some reason but the kit doesn't tell you to check them either.
Good to know, thanks.
I'm enjoying the voice over videos, I pay closer attention......squirrel!
Lol... Thanks for the feedback
I think this tool is about to become the most used piece that you own. I bet it lives on the tractor most of the time.
Probably correct along side my forks.
Great video, interesting... 🙂
Thank you for watching
Good morning!
Morning!
If you add top and tilt the deere kit is the best.
Well congrats sir now you can do alot more with that grapple, that thing is going to make some jobs so much easier now that you don't have to get out and load it in the bucket and have you given any thought adding some wheel weight's to help and not have anything hooked up to the back when you took the tire off and said it was full of water i said oh i know that pain removing and installing OTR tires is one part of my job and i also deal with earth mover tires as well. Great job sir can't wait to see you really give it a workout.
I'll probably just always hook something up on the year. I'm working on a ballast box now.
It’s a good thing you know how to work on a John Deere tractor! It looks like you almost had to rebuild the tractor to get the new part put in!
Lol no it wasn't that difficult at all.
did a very good job. now you can do some grappling. be bless and love and safe. it look like that Ruger may sure you was doing the job correct.
He sure was!
My husband loves his. He scoops flat then clamps down.
They are huge helpers
i call it jaws!
Well done Andrew.
You probably handled some tubing that my Brother in-law and or his Son made. They work at Co. Here in Central Wis that Forms boat Loads of Complicated Tubing bends for JD. and Others to boot. Lot of military Equipment too.
Mike M.
Nice
Well, you really should have a How To channel, it would be a hit! Now strait ahead to the grapple fun time:)))
I kind of do 😉
We are back in the firewood business
Yes we are, got a lot to go pick up.
Holy moly 😮 that grapple is huge..... Not only that your going to be able to clean up a lot of things. I wonder if it will pick up round hay bales 🤔🤔🤔.
My forks accept hay spears and weigh a lot less.
That would be perfect for storm cleanup!
Yes it will be
@@TKCL there was a tornado that hit yesterday evening about 14 miles from where I live. A small tractor with a way to handle brush is perfect for that application. Don’t tear up the yards like a skid steer or other heavy equipment.
Get you some of that thick spiral plastic hose wrap....it's good for soft hoses to keep from rubbing
Good idea!
You made that install look like you were a Deere mechanic and did it all the time. Now you'll be setting up your cut logs so you can pick them up easier...I won't be surprised if you do a video on just that - how best to use the grapple... :)
After I play with it I'm sure there will be some stuff to share.
Check out Outback Wrap. If you want more hose protection.
Already ordered some spiral wrap 😉
I can imagine having something that big on the front of your tractor takes a little bit of practice time to get good at. Give it a little while. I'm sure you'll master it.
For sure, plus a whole new set of controls to master.
Thank you so much Andrew for making this video. You did a excellent job of explaining it. I have a John Deere 4320 open station I wonder if the kit would work on mine? Have the hydrostatic transmission but I don't think I have the power beyond I have have the rear function hooked up to a tilt cylinder. For the 3 point hitch. But I don't know if I can hook up a grapple I want that grapple you got. I don't know if it's too big for my tractor though thank you so much for explaining I'll watch the entire video and it was amazing man thank you
The open station kits are different, you'd have to contact John Deere service department for the quote. May in suggest Summit Hydraulics. They specialize in open station kits and are about half the money of a John deere kit.
Oh Happy Days
Yes!
God bless you Andrew you make everything look easy 😂. The grappler looks like something out of Road Warrior 🪖. Very happy for you.
Lol yeah Mad Max grapple!
Looks like its workin good. A lot of movement in them hydro lines up front when your activating the hyrdo. Perhaps a few of those spiral wraps they sell and see if you cant tie some to the grapple a bit to avoid all that slop. They are cheap on Amazon and have seen them used by several other channels (out of the Woods) to help dampen movement of hoses. All that movement will absolutely wreck those crimped fittings prematurely.
Ordered spiral wrap last week 😉
@@TKCL GG
What would you call it if you had to grab a stack of apple tree sticks and branches..... An Apple Grapple....LOL 🙂
Your in business now.
Oh yeah!
Good job Andrew, I have an open station 4066R with a 440R MSL loader coming. The grapple I am contemplating is 1000 lbs with 47” bottom rake. I was concerned about so much weight out front of the loader pins as I’ll only have 1400 lbs of lift capacity left. So, I was wonder what the weight of your grapple is?
You said the wiring for the valve is factory pre-wired. Is it clearly labeled or identifiable? Enjoyed your video. Very informative! Finally found both kits and about to install.
I honestly can't remember the label. I do remember it was the only one that would fit. A very straight forward process. I'm about to be adding 4th and 5th scvs.
I see lots of firewood being processed in the future 😁💪🏽 with the grapple
Yes sir!
when i get my money rite i'm goin to get a deere 5075e with the 520m loader and the grapple thats made in perry fla
I know the folks at Lynn's Industrial Welding, AKA Rake Master. Great grapples and people.
Hey Andrew, thanks for your videos, I find them very helpful and entertaining. I recently purchased a JD 4066m heavy duty. I've been a New Holland (tc45da) guy for many years but have been noticing how many folks like their JD so I made the switch. I'm a landscaper for new construction so I do a lot of loader work and wanted to get your option about something. I consider myself to be very efficient with the loader but noticed that the JD loader doesn't move but one direction at a time. If you are raising the bucket with a load of dirt or stone and you want to also dump as you are raising you don't that ability, is this the case with your 4066R? Is this common with John Deere? With my New Holland I could be moving the tractor forward of reverse while raising and dumping all at the same time. I didn't even consider that this would not be a industry standard. Thanks for your thoughts! Michael
Not the case for me, I have the non self leveling 440r loader and can manipulate the dump, curl directions anyway I want while lifting or lowering. Do you have the self leveling loader?
That’s awesome. It’s weird it’s so big it makes your tractor look tiny. Lol.
Tractor is kind of small
@@TKCL lol. It’s not that small, but the huge grappler definitely gives it a different optical perspective. I’m glad it works, it looks pretty cool.
Andrew, I have an open station 4066R coming and the grapple I am contemplating is 1000 lbs. How much does yours weigh. I’ve skimmed through videos and comments trying to determine that.
Wow that's extremely heavy, I'm guessing mine is 800lbs, but that's a guess. Personally I'd be installing a 500lb range grapple to get your lifting capacity back.
I had thought the same and actually had an Artillian Grapple-Rake-Grapple set up ordered and just about shipped and they called me back and said the 4 series 4066R was too much tractor for their grapple and after much discussion we agreed to mutually cancel the order. The one I’m looking at is the 72” EZ Grapple from CLFab out of Iowa. I’m thinking that if I do purchase it I should get it as a skid steer attachment, then buy the adapter to JDQA and that way “if” it is just too much or I am disappointed in performance then I could be able to sell it to a skid steer owner. If I have them put the JDQA mount on it then it is relegated to only a compact tractor. I’m not sure if 5 series tractors have the JDQA set up. If not then that means the largest 4 series tractor can’t handle it then I have the worlds most expensive paper weight.
I’ll be installing this same kit. Any idea what size the nut was that you had to use vice grips on? I’ll be picking up a 32mm after watching this.
It's huge no idea to be honest. My set goes up to 32mm and it was a lot larger.
You need to set that pole up and put a camera on top for a 360 view of the property.
I've got something way better coming 😉
It's a "Deerosaurus"... 🙂
where did u get the gripple at sir
This explains it best ruclips.net/video/DZzn1ILw5uI/видео.html
More practice you'll get it
Yep, takes time to master.
Started to install my JD kit and found the port taken by “Hitch Assist”. Hard line in kit will only fit the port you installed it in.
Remove/cap Hitch Assist? Move Hitch Assist to middle port? “T” hitch assist and install JD 3rd function kit as built?
That I am not sure about, mine did not have it. No doubt they make an adapter for this.
Happen to know if you can run the Lane Shark cutter with this setup? I have looked high and low but can’t find anything showing the 4066r hooked to a lane shark. Lane Shark sells the WR Long kit for this tractor but don’t want to give up my factory joystick for that grapple switch that I plan to get. Any help would be GREATLY APPRECIATED!
You can't because I looked at that myself. You need a specific setup that dumps directly back to the sump. Apparently you run into hydraulic overheating issues if you run it like this. The best way to run one of those is with a power pack on the rear pto, but it gets very expensive that way.
@@TKCL thanks for the input. That helps a little. I know lane shark has the WR Long kit for my tractor but I don’t want all that add-on stuff. Wanted to stay as factory as I could.
@@adambecton you're going to need one of their kits for this to run properly and not overheat your tractor. I gave up on it and just invested in a mini excavator and brush cutter. Expensive, but I have many other uses for the excavator. Limb cutting is one of the biggest reasons I bought it though.
What brand grapple is that
It's hard to say, it's modified ruclips.net/video/DZzn1ILw5uI/видео.html
👀👀
👁️
Add 4th and 5th scv.
Good morning Andrew. This may be a strange question but you'll know the answer. I was catching up on videos and watch the one with the grapple which I commented on. And you mentioned you put water in your tractor tires. I don't have a lot of experience with tractors, so my question is by chance on a really cold morning can the water freeze in the tires? 🤷. Hey you don't know if you don't ask. 😁
They make a liquid antifreeze ballast that most people use in colder climates. I'd imagine that is also in mine. Regardless does not stay cold enough long enough here to freeze that much water in my tires.
Okay that makes sense. Thanks for the reply.
@Nature Nut I have a 4066R coming and they are going to put Beet (yes the vegetable) juice in my tires. I am in Missouri and it most definitely freezes here.
@@danlichtenberger6462 holy cow. Beet juice. Now that's a new one. Lol. So it doesn't freeze. Cool
I've definitely heard of beet juice.
he'll make it great again Trump would like it i bet
You may have had better time turnaround by checking with yanmar or other manufacturers since that may have made this for John Deere since they no longer make their own tractor's.
Didn't think about that
You say no o-rings between the valves. Um yes there is.
I was trying to say the new valve has no orings or gaskets on its sealing surface. There's nothing to fool with there on the new valve.