Yes sir, this is the second diverter I have installed and I would say it is a DIY project that any tractor owners should be able to do. The only possible points of confusion is finding where to tie in your hot wire and getting the right threads on your fittings. I didn’t go into detail on either of those because it will vary by Tractor
You hold the button down while opening and closing the Grapple which actually feels natural after a little bit. So if you want to curl and close at the same time you can hold the lever over and just toggle the button on and off and it will do both Fairly quickly
How does this 3rd function diverter compare to the one on your tractor or other available? Same performance and use? I do not see it on their website.Maybe not available yet.
This kit is almost identical to the one I use. Mine is from Artillian and this one is from precision manufacturing. I think the Artillian kit cost more but came with a couple of the hoses that this one didn’t. Not sure because it’s been a while. I would say true third function is better because it allows you to curl and close the grapple at the same time. It is also more expensive and not available on all models of tractors. This diverter style can be put on any tractor that has a loader
@@RockhillfarmYT my tractor came with a dealer/factory installed 3rd function kit. Also had an extra hydraulic circuit at the back. I thought it would be better to get these items installed as part of the package when the tractor was new, clean and in the dealer’s workshop. They were short of stock when the tractor was purchased so the technicians did a really good job.
John Deere did not have factory third function option available for my tractor when I bought it. They did come out with it in the last year as a factory option I did get it with 2 sets of rear remotes but I had to install my own diverter at this point I’ve actually got three sets of auxiliary hydraulic lines on the front of the tractor and the two sets on the back plus the power beyond. I would still rather have the factory third function because it’s more convenient to use and doesn’t have any power loss, but since I already have mine set up I’m not gonna spend the money on it
I just noticed your comment about not seeing it on their website. If you’re talking about the diverter I installed in the video, it is available for sale on www.agfolks.com
www.agfolks.com/product/xtra-valve-kit-mp020 I think Code rockhill5 will give you 5% off And let them know that you saw my video I know that code works on the grapple but I actually did not ask if it works on the valve kit
Use code: Rockhill5 to get 5% off your order at www.agfolks.com Direct link to the product www.agfolks.com/product/xtra-valve-kit-mp020 Here is the install video for the add-a-grapple ruclips.net/video/nNQGwHTtE8k/видео.html Here is the precision manufacturing factory tour ruclips.net/video/PR2gGDbZ5_o/видео.html Here is the precision manufacturing 3rd function diverter install video ruclips.net/video/lbbADL6Lois/видео.html
I’m not trying to be misleading. You are adding a third function. This tractor had 2 loader functions when I started and when I finished it had 3 There are just a lot of different ways to do that. True third function is optimal, but using a diverter is the cheapest/easiest way to add third function.
You showed exactly what I'd be afraid of, fittings dont fit. If I buy a 3rd function kit I dont even want to go chase down zip-ties, I expect everything needed and everything fits and fits right......
Looks easy enough. This should help some folks who are on the fence about doing this themselves.
Yes sir, this is the second diverter I have installed and I would say it is a DIY project that any tractor owners should be able to do.
The only possible points of confusion is finding where to tie in your hot wire and getting the right threads on your fittings. I didn’t go into detail on either of those because it will vary by Tractor
Very nice video. P.S. Your buddy looks like a cheerful cuss! He is smiling ear to ear!
I really like my Artillian 3rd function kit. It was easy to install and has been very reliable.
Yes sir. The two kits are very similar. I am still using the Artillian diverter on my tractor
Just about to hit 100k subscribers. Congratulations.
Thank you
That’s been a big goal for me. I appreciate all the people who have made that possible.
When you have the 2 female coupler from the diverted valve, does it mater which way its hooked up? Top bottom lines?
One question about switch. Do you have to hold it while using 3rd function or do you flip it and stays until you switch it back?
You hold the button down while opening and closing the Grapple which actually feels natural after a little bit.
So if you want to curl and close at the same time you can hold the lever over and just toggle the button on and off and it will do both Fairly quickly
Thanks for the video. Love the t-shirt !!
Thanks for watching
Nice. Simple enough to make happen.
Yes sir.
Thanks for watching
How does this 3rd function diverter compare to the one on your tractor or other available? Same performance and use? I do not see it on their website.Maybe not available yet.
This kit is almost identical to the one I use. Mine is from Artillian and this one is from precision manufacturing. I think the Artillian kit cost more but came with a couple of the hoses that this one didn’t.
Not sure because it’s been a while.
I would say true third function is better because it allows you to curl and close the grapple at the same time. It is also more expensive and not available on all models of tractors. This diverter style can be put on any tractor that has a loader
@@RockhillfarmYT my tractor came with a dealer/factory installed 3rd function kit. Also had an extra hydraulic circuit at the back. I thought it would be better to get these items installed as part of the package when the tractor was new, clean and in the dealer’s workshop. They were short of stock when the tractor was purchased so the technicians did a really good job.
John Deere did not have factory third function option available for my tractor when I bought it. They did come out with it in the last year as a factory option
I did get it with 2 sets of rear remotes but I had to install my own diverter
at this point I’ve actually got three sets of auxiliary hydraulic lines on the front of the tractor and the two sets on the back plus the power beyond.
I would still rather have the factory third function because it’s more convenient to use and doesn’t have any power loss, but since I already have mine set up I’m not gonna spend the money on it
I just noticed your comment about not seeing it on their website.
If you’re talking about the diverter I installed in the video, it is available for sale on www.agfolks.com
@@RockhillfarmYT ya all I saw for compact tractors was a reducer kit
Excellent video!
Thank you sir
Nice shirt 😎
Thanks. I like it so much I bought two more
The capitalism shirt?
Yeah. I get comments on it all of the time
What is the link to get the 3rd function kit at. I would like to put one on my 3038e tractor.
www.agfolks.com/product/xtra-valve-kit-mp020
I think Code rockhill5 will give you 5% off And let them know that you saw my video
I know that code works on the grapple but I actually did not ask if it works on the valve kit
@@RockhillfarmYT Thank you. I will look into this on Monday.
Where can I buy that kits? Can you tell
It’s in the description and the pinned comment, as well as how to get my discount with code rockHill at agfolks.com
I might just have to add a grapple to my 1975 jd 830
With these products it’s a fairly easy DIY project to add a Grapple to any tractor with a loader
Thanks for watching
Awesomeness
Yes sir. Thanks for watching
so the kit does not come with everything you need to do the job? That sucks. I want a kit that has all i need.
It’s been a long time since I installed this and uploaded this video. Seems like I had to get a couple of hoses but I don’t remember exactly.
Your friend Jimmy, he’s a noisy bastard, isn’t he? 😂😂😂
😂 I will have to remind him who the stat of this show is
Use code: Rockhill5
to get 5% off your order at www.agfolks.com
Direct link to the product
www.agfolks.com/product/xtra-valve-kit-mp020
Here is the install video for the add-a-grapple
ruclips.net/video/nNQGwHTtE8k/видео.html
Here is the precision manufacturing factory tour
ruclips.net/video/PR2gGDbZ5_o/видео.html
Here is the precision manufacturing 3rd function diverter install video
ruclips.net/video/lbbADL6Lois/видео.html
A diverter setup is not the same as a third function setup. The title is misleading.
I’m not trying to be misleading.
You are adding a third function. This tractor had 2 loader functions when I started and when I finished it had 3
There are just a lot of different ways to do that.
True third function is optimal, but using a diverter is the cheapest/easiest way to add third function.
You showed exactly what I'd be afraid of, fittings dont fit. If I buy a 3rd function kit I dont even want to go chase down zip-ties, I expect everything needed and everything fits and fits right......
dude get a better mic sound like your yelling at us