Literally the first step is wrong. if you attach the plastic back from the front how he does in this video the tabs on the bottom will hit the metal bar and pop out of the mountings. you can see in the video after he attaches the toggle clips to the handle that it makes a clicking noise and then is leaning crazy far back and is loose. It shouldnt do that. The booklet instructions say for you to attach the plastic piece from the REAR of the stroller. now my stroller is damaged... thanks video
Were you able to fix it? We just followed these instructions from Magic Beans and the same thing happened to ours. We are afraid we've just broken our pram and have tried to remove the red button but it is stuck and bending it back seems to be a bad idea.
This happened to me too!!!! Luckily I realised that I could pop the red button back out using a screwdriver - I had a huge panic that I had killed the pram forever! @@annawarren8249
Totally! I was having a heart attack that I would break the pram! The instructions booklets isn't clear either with no wording 😡 took me a few go to actually get it to work
Thank you so much for this! I just washed the whole yoyo+ and was reassembling it again based in this guide. Almost done, but cannot figure out how to reattach the basket under the seat. The velcro is just strange at the front. Any hints please?
I put the plastic harness on from the laying position like going towards outside of the stroller like really lean back and attached it. Is that wrong or can effect the performance of the seat? I’m asking bcoz after I already did it I watched your video and you did it from the front it was laying towards inside the stroller. Do I need to take it apart and do it again? If so how do I do it without breaking that red thing out? Thank you.
This video is mostly good BUT PLEASE PLEASE CORRECT THE FIRST PART about attaching the back support. Like a few other people, I nearly damaged my yoyo by trying to replicate what you did, but fortunately I referred back to the manual instead. Thanks for the rest of the video which alongside the manual was helpful, but that first step is crucial.
Hi, I'm actually wondering the other way. Will the new colour pack suitable to use with the old yoyo chassis? I need to change the canopy but the colour pack available on the market are only those for yoyo+. Thank you
great instructions - made it simple! However as per the 2 points - video needs to be updated to say 1)fix back pad from the back area & 2) fix velcro to strap seat securely. Read other comments for help as that how I worked this out!!
Hello I wanna ask you is this stroller applicable for daily use not only traveling? Because all the reviews that i saw mentioned how great it is for traveling. Thank u
Though we do recommend the Yoyo as a travel/secondary stroller, it is definitely possible to use it full time. As long as you aren't going through rough terrain or snow a lot, it will be great.
I can't get my nuna pipa seat to fit on the adapter. Can you show me how? Do I have to take the fabric off the frame to get it to work? The cyber Q fits, but not the nuna pipa.
Hi Laurie! Yes, the fabric must be off of the frame for the Nuna Pipa to fit on the adapter. If you are still having trouble, do not hesitate to give us a call at 866-600-2326!
Question :) how can I iron a canopy ? Can I do it before installation ? Or should I just steam it after installation ? Also , do you sell umbrellas for yoyo ? Didn't find it on your website
+Tatiana V Hey Tatiana this is Eli (the guy in the video and owner of Magic Beans) Thank you so much for shopping with us. We really appreciate it. Your stroller is going out today so you should have it early next week. As for the canopy, it should naturally loose all creases once you put it together, but if that doesn't do the trick, I'd suggest using a hand-held steamer. Please let me know if you have any further questions. Thanks!!!!
H, I have the Yoyo frame and 6+ colour pack, plus a Cybex Cloud Q car seat (which I will use instead of the 0+ pack.) When assembling the Yoyo for use with the car seat, should I just use it as it is out of the box (no assembly required), or is it suggested to set up the fabric parts and colour pack completely, and then the carseat on top? Thanks!
Hi Hannah! Yes, we'd suggest doing it like Eli in the video. Set up the seat and color pack then attach the car seat adapters (10:10) and attach your Cloud Q.
I have the yoyo (not the +) but I think they both have the red button to lock the bottom piece in. I had it set up to use with my car seat and the infant parts, but now I want to install the 6+ parts, and I need to remove that plastic bottom piece in order to attach the 6+ parts. How do I get that piece off? The red button seems to be locked in now and I can't figure out how to release it.... help! THANK YOU!
Is this suitable for 2 year old she is quite tall but get's tired after half an hour to 45 mins walk. I do have the bugaboo donkey2 but the seat is small. Also thos looks good for holiday easy fold away.
Yes, you can! Let us know if we can help you with a Yoyo+ and a Cloud Q. We offer free shipping and tax free on both of these items. If you have any other questions, don't hesitate to e-mail me at questions@mbeans.com. Thanks! Eli
Hi ! Love all your videos. Can you do a comparison between this yoyo and the uppababy gluxe? Not sure if it's similar at all but looking at lightweight strollers that is great for travel and long walks (malls, Disneyland etc)
Thank you! Will check it out! Btw-- do you know where BABYZEN is based out of and manufactured? My guess is China but I asked them on their IG page and they didn't respond. I tried researching the company on their webpage usually there is an "about us" section, but there's no information on them and their company! It's kind of disappointing as if I'm spending that much on a "travel" stroller I would hope to know more about the company etc. also they don't seem to have a number which leads me to believe they are based out of China. Not that anything is wrong with that, since almost 99% of stuff is made there, but just for piece of mind for customers! I have an uppababy vista and even though their items are made in China, at least they have fabulous customer service and can readily contact them via phone/email. Sorry for the rant! If you have any insight or info on the company please share :) thanks again!!
That's totally understandable that you would be curious! The Babyzens are designed in France. But they are made in China, which is very common for a lot of strollers.
Thanks!! I noticed on one of the other yoyo videos you said weight limit is 50lbs, is it 50 or 40lbs? All other places I checked on description says 40lbs. Thanks :)
Sorry for the confusion! It technically can hold up to 50 pounds, but the advertised European standard is 40 pounds. They believe by 50 pounds (about 5 years old) the child should be walking.
This video is totally wrong! Attaching the back support from the front and than pushing it back, bent the 2 plasting parts! The video should be removed!!!!! You will damage your pram if you follow the first step!
There are a few things that left me confused about these instructions. 1.) as mentioned by others, it looks like the back piece isn't properly placed when it's attached and it could possibly damage the stroller when it's forced back. 2.) I don't think the top side straps were ever attached when the initial seat straps were fastened. 3.) When the car seat is attached to the base, there's a cut scene and then all of a sudden the stroller is morphed to a different configuration with no explanation (the yoyo seat is missing and the black plastic back is folded down.
First of all... Thanks Eli! We bought and assembled both the bugaboo donkey and yoyo+ thanks to you and your amazing videos! Now I have a quick question: we got the adapters and are trying to fit a maxi cosi cabriofix car seat in. We were able to, but the pieces that go IN the car seat don’t seem to go all the way into it. Is this correct or are we doing something wrong? Thanks a million!
so the rain cover that came in the box of my 6+ does not fit the complete stroller base which is the yo yo+ im so confused... so which stroller base does the 6+ rain cover COVER ?? signed, Hella confused mom from Brooklyn
Best video I’ve found on how to set up the baby zen yo-yo. Thank you!!!
Ordered this one from you guys few days ago !!! Very excited!!!!! Waiting for delivery every day
Just wanted to thank you for assembly instructions. very informative
Thank you for the instructions, way better than the attached manual.
Literally the first step is wrong. if you attach the plastic back from the front how he does in this video the tabs on the bottom will hit the metal bar and pop out of the mountings. you can see in the video after he attaches the toggle clips to the handle that it makes a clicking noise and then is leaning crazy far back and is loose. It shouldnt do that. The booklet instructions say for you to attach the plastic piece from the REAR of the stroller. now my stroller is damaged... thanks video
Were you able to fix it? We just followed these instructions from Magic Beans and the same thing happened to ours. We are afraid we've just broken our pram and have tried to remove the red button but it is stuck and bending it back seems to be a bad idea.
This happened to me too!!!! Luckily I realised that I could pop the red button back out using a screwdriver - I had a huge panic that I had killed the pram forever!
@@annawarren8249
Same thing happened to me!! I managed to take out the red button with the screwdriver as well. Now it’s with scratches! This is terrible!
Totally! I was having a heart attack that I would break the pram! The instructions booklets isn't clear either with no wording 😡 took me a few go to actually get it to work
TheUnicornucopian same thing happened to me! I thought mine was ruined, but was able to fix, thank God. This video should be deleted.
Perfect step by step instructions
Thank you so much for this!
I just washed the whole yoyo+ and was reassembling it again based in this guide. Almost done, but cannot figure out how to reattach the basket under the seat. The velcro is just strange at the front. Any hints please?
Is this compatible with the old babyzen yoyo?
I put the plastic harness on from the laying position like going towards outside of the stroller like really lean back and attached it. Is that wrong or can effect the performance of the seat? I’m asking bcoz after I already did it I watched your video and you did it from the front it was laying towards inside the stroller.
Do I need to take it apart and do it again? If so how do I do it without breaking that red thing out? Thank you.
Thank you. I think my husband would have exploded without your guide - he's short on patience but it's all assembled now.
Haha, that's great to hear! Enjoy :)
This video is mostly good BUT PLEASE PLEASE CORRECT THE FIRST PART about attaching the back support. Like a few other people, I nearly damaged my yoyo by trying to replicate what you did, but fortunately I referred back to the manual instead. Thanks for the rest of the video which alongside the manual was helpful, but that first step is crucial.
For real
Wich adaptors should i buy for the Cloud Q car seat? Are all the yoyo 6+ adaptors the same?
hi! I just wondering if the old version of canopy & seat pad would fit into the new yoyo+ since it has a slightly larger canopy. thank you
Hi there! It will work, but we highly recommend the newer version - it is quite nicer! :)
Hi, I'm actually wondering the other way. Will the new colour pack suitable to use with the old yoyo chassis? I need to change the canopy but the colour pack available on the market are only those for yoyo+. Thank you
great instructions - made it simple! However as per the 2 points - video needs to be updated to say 1)fix back pad from the back area & 2) fix velcro to strap seat securely. Read other comments for help as that how I worked this out!!
Thanks! I really should update this video in 2020. Best, Eli
Hello
I wanna ask you is this stroller applicable for daily use not only traveling? Because all the reviews that i saw mentioned how great it is for traveling.
Thank u
Though we do recommend the Yoyo as a travel/secondary stroller, it is definitely possible to use it full time. As long as you aren't going through rough terrain or snow a lot, it will be great.
Magic Beans Videos i live in saudi we dont have snow or rain :) i think i’m gunna go for it. Thank you
Hi could you do a video on attaching the yoyo+ footmuff plz
hi.i was wondering if the buckle for babyzen yoyo has changed.why is it that i see on other sites that the buckle is the one red button release type?
We noticed that as well. BabyZen only provides pictures of the European Yoyo with a red button, and in the US the button is actually black.
ic...thanks
I can't get my nuna pipa seat to fit on the adapter. Can you show me how? Do I have to take the fabric off the frame to get it to work? The cyber Q fits, but not the nuna pipa.
Hi Laurie! Yes, the fabric must be off of the frame for the Nuna Pipa to fit on the adapter. If you are still having trouble, do not hesitate to give us a call at 866-600-2326!
Question :) how can I iron a canopy ? Can I do it before installation ? Or should I just steam it after installation ? Also , do you sell umbrellas for yoyo ? Didn't find it on your website
+Tatiana V Hey Tatiana this is Eli (the guy in the video and owner of Magic Beans) Thank you so much for shopping with us. We really appreciate it. Your stroller is going out today so you should have it early next week. As for the canopy, it should naturally loose all creases once you put it together, but if that doesn't do the trick, I'd suggest using a hand-held steamer. Please let me know if you have any further questions. Thanks!!!!
+mbeans.com thank you Eli !!!
Thank you! Had a bassinet on the yoyo before this and this video really helped me swap to the 6 month + model. Super useful.
Glad it helped!
Really helpful. Thanks. Oh, and I love your performances with Queen. 😁
When does the nuna pipa adapter for the Yoyo+ come out?
Hi Laurie! The adapter is available - we have it in stock! Order here: mbeans.com/babyzen-yoyo-plus-car-seat-adapter-cybex.html
Thanks much for making this! Made assembly a breeze!
So helpful, thank you!
Is this compatible with cybex cloud Q? I’ve Heard the adapters only work for Aton Q.
Yes! Check out our video at 2:40 where Eli clicks it into the Yoyo+ ruclips.net/video/rYjyJ7hgz0Y/видео.html
Very thorough
Hi, Im having trouble dismantling the baby cot to the 6+ the back rest does not want to de attach. Please help?
did yoy get a response to this -i have the same issue
Hi! there are different back positions using 6+??
I just checked the status online. Omg it says Pending 😱 I hope you have it in stock , when I placed an order it was in stock
H, I have the Yoyo frame and 6+ colour pack, plus a Cybex Cloud Q car seat (which I will use instead of the 0+ pack.) When assembling the Yoyo for use with the car seat, should I just use it as it is out of the box (no assembly required), or is it suggested to set up the fabric parts and colour pack completely, and then the carseat on top? Thanks!
Hi Hannah! Yes, we'd suggest doing it like Eli in the video. Set up the seat and color pack then attach the car seat adapters (10:10) and attach your Cloud Q.
The holes to put the larger hook is down on my yoyo stroller ! Should i unscrew it to bring it up ? Pls help !
Hi Adriana! Please email us at questions@mbeans.com so we can troubleshoot and exchange photos.
Hi. I'm having the exactly problem! What should I do??
Adriana Diaz hey i am having the same issue how did they fix it?
Hi and thank u for the video. 2 qs.1 what the most weight capacity on it pls? And 2 . Is it foldable with 6+ or just with the bassinet?? Thanks
I love you! Thanks so much for this video!
Huge help mate!!Thank you so much for the video...
I have the yoyo (not the +) but I think they both have the red button to lock the bottom piece in. I had it set up to use with my car seat and the infant parts, but now I want to install the 6+ parts, and I need to remove that plastic bottom piece in order to attach the 6+ parts. How do I get that piece off? The red button seems to be locked in now and I can't figure out how to release it.... help! THANK YOU!
disregard! I saw an answer below - you have to use a screwdriver or something to pop it out.... thanks!
Please help I can’t release it either?? I’m trying to unclip to turn into a seat
Thank you very much this stroller is my biggest mistake!
Can i use the new babyzen yoyo seat pack for old version babyzen?
Yup :)
Is this suitable for 2 year old she is quite tall but get's tired after half an hour to 45 mins walk. I do have the bugaboo donkey2 but the seat is small. Also thos looks good for holiday easy fold away.
Hey Rozma! How tall is your little one?
Can you use the Cybex Cloud Q on this stroller in the reclined position?
Yes, you can! Let us know if we can help you with a Yoyo+ and a Cloud Q. We offer free shipping and tax free on both of these items. If you have any other questions, don't hesitate to e-mail me at questions@mbeans.com.
Thanks!
Eli
Because of you, I messed up the back harness off my baby stroller. It was completely unnecessary to push through like that. 🫠🫠🫠
Is 6 plus for babies over 6 months ???
That's right, but you might get away with 4 months depending on the baby. Eli
Thanks this was great
Glad we could help :)
Hi ! Love all your videos. Can you do a comparison between this yoyo and the uppababy gluxe? Not sure if it's similar at all but looking at lightweight strollers that is great for travel and long walks (malls, Disneyland etc)
Great idea! We love the Yoyo. In the meantime, check out this comparison featuring the g-luxe ruclips.net/video/GdoGuEy_-3k/видео.html
Thank you! Will check it out! Btw-- do you know where BABYZEN is based out of and manufactured? My guess is China but I asked them on their IG page and they didn't respond. I tried researching the company on their webpage usually there is an "about us" section, but there's no information on them and their company! It's kind of disappointing as if I'm spending that much on a "travel" stroller I would hope to know more about the company etc. also they don't seem to have a number which leads me to believe they are based out of China. Not that anything is wrong with that, since almost 99% of stuff is made there, but just for piece of mind for customers! I have an uppababy vista and even though their items are made in China, at least they have fabulous customer service and can readily contact them via phone/email. Sorry for the rant! If you have any insight or info on the company please share :) thanks again!!
That's totally understandable that you would be curious! The Babyzens are designed in France. But they are made in China, which is very common for a lot of strollers.
Thanks!! I noticed on one of the other yoyo videos you said weight limit is 50lbs, is it 50 or 40lbs? All other places I checked on description says 40lbs. Thanks :)
Sorry for the confusion! It technically can hold up to 50 pounds, but the advertised European standard is 40 pounds. They believe by 50 pounds (about 5 years old) the child should be walking.
This video is totally wrong! Attaching the back support from the front and than pushing it back, bent the 2 plasting parts! The video should be removed!!!!! You will damage your pram if you follow the first step!
Help- I am trying to remove the backrest, the red button is in (and flat) so i have no release mechansim
any ideas-
Hi Phil, we aren't exactly sure what's going on. Sorry about that. We'd suggest reaching out to Babyzen at babyzen.com/en/contact-babyzen
Phil - I have the same problem.... did you figure it out?! Can you help?
disregard! I saw an answer below - you have to use a screwdriver or something to pop it out.... thanks!
Having en adjustable handle bar is a must for me. Really missed that feature :(
There are a few things that left me confused about these instructions. 1.) as mentioned by others, it looks like the back piece isn't properly placed when it's attached and it could possibly damage the stroller when it's forced back. 2.) I don't think the top side straps were ever attached when the initial seat straps were fastened. 3.) When the car seat is attached to the base, there's a cut scene and then all of a sudden the stroller is morphed to a different configuration with no explanation (the yoyo seat is missing and the black plastic back is folded down.
can plz do a video on How to fix from yoyo 0➕ to 6➕ cuz ve tried but failed
Thank you
How do I take the backrest seat (red tab) off?
Omar Noor have you figured out the way to do it? I have the same issue
First of all... Thanks Eli! We bought and assembled both the bugaboo donkey and yoyo+ thanks to you and your amazing videos! Now I have a quick question: we got the adapters and are trying to fit a maxi cosi cabriofix car seat in. We were able to, but the pieces that go IN the car seat don’t seem to go all the way into it. Is this correct or are we doing something wrong? Thanks a million!
hin may i know do u ship to singapore?
No, just the US. Sorry about that!
me. gusta babyzen yoyo mi. favorita excelente carriola 🖒
how do I put on rain cover because we've been trying BUT no luck
Hi! Do you have the Yoyo+?
yes
It does not cover the canopy, just the tip of the canopy down to the footrest
so the rain cover that came in the box of my 6+ does not fit the complete stroller base which is the yo yo+ im so confused...
so which stroller base does the 6+ rain cover COVER ??
signed,
Hella confused mom from Brooklyn
www.whitestep.co.uk/wp-content/uploads/2016/11/rain1.png This is what it will look like.
Wow the seat is fabric ? Not a solid base ?! Is it sturdy ? No wonder you have to buy the “seat” separately
There is a plastic portion underneath the fabric below baby's bottom. It's very sturdy!
Magic Beans Videos thanks for response. Which do you prefer. The yoyo or cybex ez twist ... wish the yo yo seat can turn around
He missed the main fixing strap under the seat.
First step is absolutely wrong! It can potentially ruin the pegs of the board. As soon as I tried I knew something’s not right!
He didn't secure the seat. There is more velcro on the bottom side.
Terrible. You don't snap the back panel at all. It ends up ruining the plastic and it almost broke off.
Missing steps in this video!
Damaged the clip by following this instruction on installing the back rest.
you didnt show how to put the foot rest most difficult part👎🏻
I’ll do that in my 2020 review :)
Eli
marci
شكرا
Dont FOLLOW THIS OR YOU WILL PROBABLY BREAK IT.
Too fast, just annoying
PLEASE DONT FOLLOW THIS
Hutang
Its a little smelly even with deoderant.
seems wrong
279k views and tons of positive feedback doesn’t lie
Thank you