Street Performance Top-Mount Intercooler for the 2015+ Subaru WRX Installation Guide

Поделиться
HTML-код
  • Опубликовано: 7 ноя 2024

Комментарии • 22

  • @matheusgiovannini571
    @matheusgiovannini571 Год назад +2

    The pre-drilled hole on the cold side of the intercooler. Can it be used for water/methanol injection?

  • @jasonsanders6930
    @jasonsanders6930 4 года назад +3

    Safe for stock tune? Noticed PSI is lower with it on?

    • @mishimoto
      @mishimoto  4 года назад +7

      This is safe to run on a stock tune. However, due to the added volume of the cooler, you will see a drop in pressure as well as performance until the car is tuned to take advantage of the larger intercooler.

  • @ronynyoda4567
    @ronynyoda4567 4 года назад +1

    What year WRX did you guys test fit this on? It will not fit my 2018 WRX. I watched this install video several times. Angling this way and that way. Too many things in the way on the firewall for this TMIC to fit. Fins got bent. Also, where you need to install the stock grommets are way thicker on this TMIC than they need be. Very disappointed.

    • @mishimoto
      @mishimoto  4 года назад

      Please feel free to contact our support team, they would be happy to help you figure out what is going on, support@mishimoto.com.

  • @subarujaygarcia8390
    @subarujaygarcia8390 2 года назад +1

    Do you need a tune?

  • @baonguyen142
    @baonguyen142 4 года назад +1

    I just got my car protune but if i install would it safe for the car

    • @mishimoto
      @mishimoto  4 года назад +1

      We would suggest contacting your tuner about this.

  • @man-doe6978
    @man-doe6978 3 года назад +1

    Is it CARB Legal? Does it come with carb sticker?

    • @mishimoto
      @mishimoto  3 года назад

      Unfortunately, this is not CARB approved at this time. Sorry!

  • @Lucifer-pc1nx
    @Lucifer-pc1nx 4 года назад

    Hello Mishimoto team. I got a top mount intercooler from you guys with my Sponsorship. I noticed that after I completed the installation with my friend that the intercooler and a lot of play as in when we turn on my 2019 wrx it was shaken alot. We shut the car off to double check everything to make sure everything was tight. After doing so we started it back up and same out come. Every one I have talked to said it should have came with it's own mounting brackets. That the oem one are to small for the big intercooler. I looked in my box it came with and I didnt see any so my question is do they come with the top mount intercooler or is that something sold separately?

    • @mishimoto
      @mishimoto  4 года назад +1

      Your intercooler would have come with two brackets but this would have been to adapt the stock engine cover to the intercooler. Please feel free to shoot an email to support@mishimoto.com and we would be happy to take a look and make sure something doesn't just need adjusting.

  • @johntorres377
    @johntorres377 4 года назад +1

    Could I get this product for my 2016 wrx cvt premium stock??

    • @mishimoto
      @mishimoto  4 года назад

      This product should fit your vehicle without issue

  • @Floatworld
    @Floatworld 5 лет назад

    So we can run the stage 2 OTS map it will be fine with it, or do we need to have it Pro tune?

    • @mishimoto
      @mishimoto  5 лет назад

      This kit will work with the OEM tune or OTS maps up to Stage 2.

    • @Floatworld
      @Floatworld 5 лет назад

      @@mishimoto so you can also run stage 1 +? Thank you for replying

  • @swaggycelica
    @swaggycelica 5 лет назад

    the strut bar fit with this intercooler?

    • @mishimoto
      @mishimoto  5 лет назад

      this might depend on the strut bar. However the intercooler fits under the stock engine shroud so it should not interfere.