A big Mac costs $18 in California, take a guess how much it costs to pay machinists to run CNC, QC guys, assembly guys. It's a 200 peice minimum for bevel grinding ect. Because these are being made in California is why it costs $400 for everyone to get paid a fair wage. People whine and complain about having to tip servers, and how low the minimum wage is ..."people deserve a living wage" But then refuse to pay the prices necessary because you can get the same of better products made in china specifically because the Chinese workers DONT get paid a "living wage"
I like ray’s design language, and I like MBK, but the sebenza 31 is an objectively finer made knife, with a lock bar insert, and tons of options and better availability, backed by by far the best warranty I have ever used, not to mention it is also made in the US. I can honestly not see a reason to buy this knife besides preferring a quick action or already owning a Seb.
Hey knife manufactures? It's 2024, could you possibly start cutting the relief for the lock bar on the inside of the frame? Ya know, where I won't feel it every time I use the knife.
Nick, please drop all other knives and get ahold of the new Fox/Terzola Original Gangster to review. The comedy gold this would provide would be monumental
Great review Nick. Everything you said is spot on. I was lucky enough to score a MBK Sea lion. Despite the price to feature drawbacks in comparison to similarly priced overseas knives, there's just some intangible quality to the US made MBKs that give them a certain charm or "soul". You can tell that Sanford, Ray etc. put a lot of love into producing the knife, and that intangible quality is apparent when holding/ flipping/ using it. I thought about selling it a few times, but I know I would regret it. It's a special knife in a sea of mass produced products.
You know..At first I just thought you were a pretentious bastard..a knife Karen..but over time I realize you’re on another level with knives..a aficionado..you tell it how it is..I appreciate that..great video..Thank you for sharing..not that you’ll ever see this comment lol
I had been interested in this knife, and tried to get one on a couple of the drops but wasn't successful. Now after watching this review, I am sort of glad that I didn't get one.
@Nick - thank you for another great review! I'm always grateful for a new Shabazz video! I know your time is precious these days, but I've got my fingers crossed that you'll do a review of the TRM Bulldog! Either way, I hope all's well!
I love the sillouette, but that’s about it.. Price talk is often tiresome, but I’m truly struggling to see the value here. I guess as you suggest it’s closer to a custom. The brutal simplicity is super attractive, but I would expect that to be paired with perfection
The blade is a little thicker than the Cerbenza? Am I the only one who thinks the blade looked demonstrably thinner than the Cerbenza in that comparison?
Excellent review Nick. Not my style @ $425, but obviously a nicely made piece. I certainly “get it”, the production costs run higher here, but still feel like this price point is high. Thanks as always.
i like the knife, but honestly, after buying an all us made ti-framelock with a magnacut blade from sharps bros. for 220 bucks this feels...very steep.
Twosun shows how cheap knives can be when you throw testing and warranty out the window, Sharps Bros shows how cheap knives can be when your throw skilled designing out the window, and just machine as simplistic as possible to minimize material loss.
@@CNYKnifeNuthave you even tried the knife? bet you haven't, cause it's very well made, easily on par with a zt and better than my $450 spartan harsey any day of the week. btw: the machining on the monterey bay is much more simplistic than on the sharps bros. you have no clue what you're talking about, buddy.
@@ix8750 you are right, there was no inlay on mine. i sold it 2 days later, detent was horrible (kinda nonexistent but still very sluggish and slow) and they didn't chamfer the edges on the handle at all. all in all it felt very clumsy and chunky, every spyderco, zt or hogue has much better fit'n'finish lol.
Hi Nick! Thanks for the review. I've been wondering what do you think of cheap Scandinavian knives.. I know that's not your thing, but classic fixed blade Hultafors is very good at what a knife needs to be good at, and Mora is getting better recently, too. And there are a lot of traditional knives with a long history of craftsmanship, like the Finnish Puukkos from Kauhava and other towns as well.
Wanted to get the river otter but now after the review, I. Rethinking that. the shortcomings in quality are hard to ignore. I'd pay an extra $50 bucks if they put a lock bar insert and made the stand offs more secure. Lack of a lock bar insert is a deal breaker.
Seeing as I live in Ireland the knife is being made overseas respective to my angle and so I can laugh about the price without hinderence. 600 miles down the road is not considered "local" on our little island.
No Lockbar insert, no countersunk screws, mediocre finishing, no bearing. Why would anyone pay extra money for a knife of this spec just because it's made here? In the US, the idea is that people are being paid more to make a better knife, which is not the case here.
I must be ignorant, I can't see what makes this worth the price or what makes the Sebenza worth its price. If you have one and love it, that's great, but I just don't get it. If I'm spending $400 on a knife like this, I would feel like the majority of that is me "tipping" the maker for keeping their business in the US.
If you need to defend a knife's price point that much it's probably overpriced. The components are probably like 60 bucks, as you saw assembly probably takes 10 minutes and grinding the blade $300?? Even being American made way overpriced for what you get.
I'm seeing a lot of things that make me wonder how it commands a $400+ price tag.
If you’re seeing alot of things I guess it’s better than seeing nothing.
A big Mac costs $18 in California, take a guess how much it costs to pay machinists to run CNC, QC guys, assembly guys. It's a 200 peice minimum for bevel grinding ect.
Because these are being made in California is why it costs $400 for everyone to get paid a fair wage.
People whine and complain about having to tip servers, and how low the minimum wage is ..."people deserve a living wage"
But then refuse to pay the prices necessary because you can get the same of better products made in china specifically because the Chinese workers DONT get paid a "living wage"
I like ray’s design language, and I like MBK, but the sebenza 31 is an objectively finer made knife, with a lock bar insert, and tons of options and better availability, backed by by far the best warranty I have ever used, not to mention it is also made in the US. I can honestly not see a reason to buy this knife besides preferring a quick action or already owning a Seb.
I think that’s a fair assessment.
If you already own a Seb then you have even less reason to buy one of these IMO. At $300 I would have been very interested as a CRK alternative.
Welcome back Nick! Hope you are well!
At that price it needs a captive pivot, shouldered standoffs, and a lock bar insert at bare minimum. US made or not.
.....and fetch your slippers,?
@@jayr526No, Ilike MBK but he has a point. At least the lock bar and captive pivot...
Hey knife manufactures? It's 2024, could you possibly start cutting the relief for the lock bar on the inside of the frame? Ya know, where I won't feel it every time I use the knife.
Amen. How is the is so hard for them to do?
Allways happy to see a new video from you. Love your content. Hope you're fine.
Always enjoy your reviews, Nick.
Nick, please drop all other knives and get ahold of the new Fox/Terzola Original Gangster to review.
The comedy gold this would provide would be monumental
Great review Nick. Everything you said is spot on. I was lucky enough to score a MBK Sea lion. Despite the price to feature drawbacks in comparison to similarly priced overseas knives, there's just some intangible quality to the US made MBKs that give them a certain charm or "soul". You can tell that Sanford, Ray etc. put a lot of love into producing the knife, and that intangible quality is apparent when holding/ flipping/ using it. I thought about selling it a few times, but I know I would regret it. It's a special knife in a sea of mass produced products.
I bought one and like it. It is a bit pricey but worth it. Good honest review.
You know..At first I just thought you were a pretentious bastard..a knife Karen..but over time I realize you’re on another level with knives..a aficionado..you tell it how it is..I appreciate that..great video..Thank you for sharing..not that you’ll ever see this comment lol
I was highly impressed the very first video that I saw from Nick. I continue to enjoy them
Thanks for the breakdown and walkthrough! This one and the Sea Otter evade me, but not for long! Enjoy the MBK products!
I had been interested in this knife, and tried to get one on a couple of the drops but wasn't successful. Now after watching this review, I am sort of glad that I didn't get one.
@Nick - thank you for another great review! I'm always grateful for a new Shabazz video! I know your time is precious these days, but I've got my fingers crossed that you'll do a review of the TRM Bulldog! Either way, I hope all's well!
I love the sillouette, but that’s about it.. Price talk is often tiresome, but I’m truly struggling to see the value here. I guess as you suggest it’s closer to a custom. The brutal simplicity is super attractive, but I would expect that to be paired with perfection
Shabazz posts, i upvote
One day CRK will catch up and figure out that it's sometimes very useful to be able to open your knife with the 'wrong' hand.
Love MBK Knives. Just picked up the Mini Rosalinda. …. Verrrry niiice
Have wanted a Sea Otter for a long time... hope they decide to do another large batch. Would definitely pick MBK over CRK.
The blade is a little thicker than the Cerbenza? Am I the only one who thinks the blade looked demonstrably thinner than the Cerbenza in that comparison?
Excellent review Nick. Not my style @ $425, but obviously a nicely made piece. I certainly “get it”, the production costs run higher here, but still feel like this price point is high. Thanks as always.
cool knife
I like the gray color.
Your review is way better than the knife.
Love to see your videos!
i like the knife, but honestly, after buying an all us made ti-framelock with a magnacut blade from sharps bros. for 220 bucks this feels...very steep.
Twosun shows how cheap knives can be when you throw testing and warranty out the window, Sharps Bros shows how cheap knives can be when your throw skilled designing out the window, and just machine as simplistic as possible to minimize material loss.
@@CNYKnifeNuthave you even tried the knife? bet you haven't, cause it's very well made, easily on par with a zt and better than my $450 spartan harsey any day of the week. btw: the machining on the monterey bay is much more simplistic than on the sharps bros.
you have no clue what you're talking about, buddy.
@@RUclips-Censorship-Police spartan harseys are meh for 450$. I don't think they even have steel lock bar inserts...
@@ix8750 you are right, there was no inlay on mine.
i sold it 2 days later, detent was horrible (kinda nonexistent but still very sluggish and slow) and they didn't chamfer the edges on the handle at all.
all in all it felt very clumsy and chunky, every spyderco, zt or hogue has much better fit'n'finish lol.
Hi Nick! Thanks for the review. I've been wondering what do you think of cheap Scandinavian knives..
I know that's not your thing, but classic fixed blade Hultafors is very good at what a knife needs to be good at, and Mora is getting better recently, too. And there are a lot of traditional knives with a long history of craftsmanship, like the Finnish Puukkos from Kauhava and other towns as well.
Wanted to get the river otter but now after the review, I. Rethinking that. the shortcomings in quality are hard to ignore. I'd pay an extra $50 bucks if they put a lock bar insert and made the stand offs more secure. Lack of a lock bar insert is a deal breaker.
Good lock geometry makes a steel insert unnecessary, and a ton of makers use steel inserts as a replacement for good geometry.
Nice review. Are you going to review the mini-Rosalinda? And what brand of ruler are you using? Machinist’s ruler?
This looks like a lovely lil knife, but geez for $400 I feel like it should have an over travel.. would still think about it over the Sebenza 21
nice, Thanks!
Nick, did metal complex contact you to review his knife with Kunwu?
Do they make a left handed one like CRK does?
Support
USA !!!
Seeing as I live in Ireland the knife is being made overseas respective to my angle and so I can laugh about the price without hinderence.
600 miles down the road is not considered "local" on our little island.
Is that a fifty fathoms on ur wrist I see or what is that?
Most laconic Laconico knife
No Lockbar insert, no countersunk screws, mediocre finishing, no bearing. Why would anyone pay extra money for a knife of this spec just because it's made here? In the US, the idea is that people are being paid more to make a better knife, which is not the case here.
I must be ignorant, I can't see what makes this worth the price or what makes the Sebenza worth its price. If you have one and love it, that's great, but I just don't get it. If I'm spending $400 on a knife like this, I would feel like the majority of that is me "tipping" the maker for keeping their business in the US.
I absolutely love this knife, but they are rarer than hen's teeth over this side of the pond. No-one seems to sell them here.
A Cheesy Haiku for No Reason:
🧀🧀🧀🧀🧀.
🧀🧀🧀, 🧀🧀🧀🧀.
🧀🧀, 🧀🧀🧀.
NIIIIIIIIIIIICK
400 plus = CRK. Not this !!!
Is there is way to get this in Bulgaria?
I really wanted one of these,unfortunately you can't buy one.
They're not available anymore? I was just in store a month or so ago and they had them
@@DanielReyes-hz1qk it comes down to timing, the high demand models tend not to sit in the store too long.
If you need to defend a knife's price point that much it's probably overpriced. The components are probably like 60 bucks, as you saw assembly probably takes 10 minutes and grinding the blade $300?? Even being American made way overpriced for what you get.