Good Question ! We have stopped main line oil pump and cooled down for a while before entering crankcase and take measurement. Can assume crankshaft isn’t afloat due to lube oil pressure.
@@najinkunnath6009 45' after TDC. (Not BDC.) Depends upon maker and model, crank angle may differ. In this engine, maker said guide shoes rest on guide @ 45 degrees after TDC. Thanks.
![[YANMAR] Alarms and Trips Testing of Auxiliary Engine | Marine Engineering | Technical Vlog : 096](http://i.ytimg.com/vi/fqTiGmsDxx8/mqdefault.jpg)
you cleared my doubt. thank you sir.
Welcome !
Great job sir
Thanks 😊
Excellent
Thanks 😊
05:52 wont the oil under the depth gauge be a problem
Good Question !
We have stopped main line oil pump and cooled down for a while before entering crankcase and take measurement.
Can assume crankshaft isn’t afloat due to lube oil pressure.
Which type of engine is this sulzer or man b &w
6UEC42LSH - Eco - D3 - EGR
Product of Mitsubishi.
how can we know that the crank angle is now 45 degree ?
@@AshiqHussain-lo1ph
Check degrees on flywheel.
thanks
Welcome !!
How the guide shoe will rest against the crosshead guide when the crankpin position is 45 degree after BDC, turning in astern direction ?
@@najinkunnath6009
45' after TDC. (Not BDC.)
Depends upon maker and model, crank angle may differ.
In this engine, maker said guide shoes rest on guide @ 45 degrees after TDC.
Thanks.
@@CHiEF_MOEMYiNTSHEiN Thanks.
@@CHiEF_MOEMYiNTSHEiN Is the main engine rotation clockwise or counterclockwise from flywheel end for ahead command ?
@najinkunnath6009
Clockwise for this engine, 6UEC42LSH-Eco-D3
@@CHiEF_MOEMYiNTSHEiN ok
How many total Readings we take on guide and guide shoe ?
Manual says 16 clearances we take you have shown only 4
Depends on maker and model, clearances measuring method and times may differ.
@@CHiEF_MOEMYiNTSHEiN ok
Excellent
Thank you.