Это видео недоступно.
Сожалеем об этом.
MAKE ARDUINO RGB REV LIGHTS w SIMHUB
HTML-код
- Опубликовано: 25 сен 2017
- DIY RGB rev lights for your sim racing simulator using SIMHUB and a Arduino. Great addition to your dash.
PARTS
USB ebay.us/tBvWhf
LEDS ebay.us/zIzhds
ARDUINO bit.ly/307UzUz
PERSPEX ebay.us/kMEEi0
SCREWS eBay ebay.to/2NbOL74
NUTS eBay ebay.to/2JOudgw
Solder: goo.gl/Ni6n4P
Wire eBay 22awg bit.ly/3oNsA9J
Soldering iron I use ebay.us/VIwU6k
This site contains affiliate links for which I may be compensated
3D files same as the video by AMSTUDIO bit.ly/2poyuT5
*For printing parts you can use a local print service like 3dhubs
My SIM Setup
Fanatec CSW 2.5 Wheel base
Fanatec Universal Hub w OMP wheel
Fanatec CS V3 Pedals
Fanatec Handbrake V1.5
Fanatec H pattern + Sequential Shifter V1.5
Fanatec Table clamps
Get Fanatec here:
www.fanatec.co...
Thank you for watching, all questions and feedback are welcome.
If you know someone interested in this please share the video with them.
Check here for other SIM Mods and DIY projects.
/ @amstudioprojects
| SIM HUB | Credit Developer
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Hey Mr. AMSTUDIO,
I ordered the parts thru your list, soldered it together ..... and it works like a dream.
Thank you very much for the good work!
Rob
How much did it cost total?
Robby Schafhauser Also curious
@@EMS9729 could always press the link and use a calculator?
@@matk22 yeah but why not ask, all links are most different sites.
@@EMS9729 just bought it, €6,34 on Banggood since I already have some cables and usb cable. Do you want a link?
your rig is every racing gamers paradise...
Dude i’m so excited that i found your channel! By far the best DIY channel ever💪
For anyone in the US, Perspex is called Plexiglass (1/8" grey tinted plexiglass). If you had trouble finding it, that may help.
Man i need to get me a 3d printer, nice job, added to my build list
I built mine out of wood
Ok… my hope is restored for searching up super specific videos… thank youuuuu
it´s a pleasure see your videos. Best material DIY simracing on RUclips! I'm making this revs lights now!
Man I would buy all of your items :) Just built my own rig and got my first g29. Keep up the great work.
Just found your channel. Awesome videos. Looking forward to making some of these projects.
Oh, and on the first corner of Brands Hatch, try breaking a straight breaking line down the middle of the straight and turn in for a slightly later apex just before you run out of road, then go full throttle to exit. It'll feel like you're about to come off into the gravel, but that dip at the bottom of the hill will give you a mass of traction just in time to keep you on the track. Feels great when you get it right.
Great video!!!! Well done ! No one even comes close on RUclips on DIY SIM!!!
Love it !!!
this stuff is lit, i might consider making this if i really need this but im getting a new steering wheel first
Tristan Boumans really?
A nano V3 from china is under 2 euro, the same goes for the TM1638 display. Then you need some plexiglas, bolts, nuts and something to wrap the front of the display. I did a similar build (used a cheaper tm1368 with only red LED's)
Tim aaa Okay thnx do u have a video about it?
Surely this is the final step for you to make an F1 styled rim with the screen, the rev leds, buttons and paddles.
Dude this is sick. I’m just going to build one as soon as the parts get to my house
Hats off to your solder guy in this video!! Makes it look easy.. maybe I am just old and can't solder with a crap.. I am going on my 2nd try now because I keep screwing it up.
thanks again for this tutorial, even though the simhub software is a lot different now with your video i was able to set mine up. Just wished i had a 3d printer to house the LED's
Use a local print service like 3dhubs
I have seen sooo many cool videos of you keep up the good work man!!!!
Ordering the parts right now, thank you
I love your channel, great DIY ideas for my sim rig
Love to be able to buy the housing n Perspex cut out. What you made is awesome getting thing together and can’t wait to have it up n running. Cheers bro subbed
Another great video!! Keep spreading the SimHub good news ^_^
SimHub is an awesome piece of software and keeps getting better!
Is this compatible for PS4 for F1?
You always make the nicest toys!
These recent videos are going to require me to get a 3D printer LOL. Wife is gonna hate me :)
can someone tell me if i can use the rpm rgb marker plus the gear indicator on the same arudino pro micro or nano ????
Someone has any idea how to mount to a thrustmaster t300?? I'm using my smartphone as a Dashboard and having the Lights on top looks amazing
You could tape it down with some mounting tape
Simao Oliveria how are you using your smart phone as a dash?
@@mr.empty-0789 Simhub can stream real time to the phone for a dash or hud like you'd find in Formula/LMP1-2/GT cars
I can 3D print a mount
Hey man, awesome videos! i got a question though, do you think it would be possible to make the 6 extra lights (3 left and 3 right of the rev lights) like they have on F1, Indy and other race cars to display flags, pit, drs etc.
Nice design mate Well done ! :) thanks for sharing
when i connect the arduino and the leds to simhub, the leds dont light, why?
Can you run multiple items on the same arduino.
I want to wire this shift light, the gear shift display. Then a button box on another arduino
Unfortunately not all ws2812 modules are equal and after building this all I got was random led action and yes it's wired correctly and setup correctly. After changing for individual led versions it works fine but for some reason not with these modules. I've ordered the ones from the same supplies as you hope they work.
Hi, I'm also having problems and I can not get it to work, it's also all properly wired and so on. Could you help me?
@@Sergyvics not currently mate but will update when its worked out i figure it's cheap version of WB2812 stick. can be an issue if not soldered nice and neatly so hope your soldering skills are not the problem. I have new sticks coming but it will be a few weeks. The arduino code is meant to take out any issued data errors so Wotever states so I'm unsure at the moment keep you posted.
@@griffo3043 Ok, thank you, I have ordered new leds to test. good luck and we are in contact.
@@Sergyvics have purchased arduino brand stick and they work fine but cost $10 AU each so fair bit more expensive the product ID is xc4380 you can get them from electronics stores that sell arduino gear. Jaycar in Aus. Only bought one to try but this made the second wb2812 work properly if put as the first module. Slightly different size and spacing of leds so I'm still waiting for new wb2812 as the others won't fit 3d print mould.
Great videos man...I´ve got one question? Is it possible to connect these led strips together to one arduino with 7-segment led display connected or each thing (7-segment led display and LED strips) need to be connected to own arduino?
The beste of category!
You're creations are inspiring, keep up the good work !
Question: is it possible to share the .leds file to import in SIMHUB?
Do you have it?
If only someone made the same content but for your real car
what would i need to do to make an arduino sequential shift light for my E30 track car? can you just make a sketch to read the signal wire?
Cool thumbnail!
please do a video on your settings in simhub for ur shift light
@0:27 I'm building my own dash, and I need to solder 3 of those 8 led boards together and I'm wondering what that metal rod you put between is. Is it solder wire or something else?
Hey mate, got a quick question regarding building this and the screen you made for the sim. I designed a box that incorporates both LEDs and the screen but I want to run just one USB to the unit. Can I wire both off the One USB or will it confuse it and not work properly. Thanks a lot for all these videos. Brilliant work mate. Also I’ll be happy to share the STL file for the screen/LEDs box once I have it all working.
Now i need to figure out how to do this with UDP for function with consoles
Awesome vid mate. Any possible way i can get the extra custom pieces for your hand-brake mod?
You are very good...plz make a custom speedometer with 300km .....😀. Thanks in advance
You should create a store front....I'm not to great with stuff like this but I will love to buy one
Ali Montañez Still interested?
Love your channel! You've inspired me to make my own F1 style steering wheel for my sim rig. I'm planning on using these shift lights as well as a 7 segment display (8 digits, compatible with simhub) and also several push buttons. Ideally I'll power it using the 6 pin DIN plug from the original wheel, and use bluetooth to communicate with my PC. My question is, would I be able to run all these functions simultaneously through simhub? Thanks.
Where do you mount the arduino??
is what you can make us a video for how to make a h shifter with arduino please and you are the best for for the DIY
Your videos are amazing. I've learnt a it just watching them. Have you considered selling some of your ideas. Love your BMW gadge video. I'm looking to make a driving sim and I'm definitely using that idea. Love your videos.
Great vid!!! Looking at doing my own based on this.
All the links from the perspex downward seems to not want to open? Where do I get the perspex and could you please supply the detail on the wire you used as well as the nuts and screws sizes as well as the detail on the soldering?
Good night, how could I turn on the gear indicator along the led bar?? only with another arduino?
Hi, i am having trouble with Simhub writing to the arduino (i used a Duinotech AT32 board from jaycar) - it wont finish the upoading of the profile, any ideas?
Good video. I wonder if is possible to use the first and the last led only for to show yellow and blue flag and the other for rpm. It would be awesome. In the simhud i can´t understand how to change those properties
do you need to code in arduino for this project or you just have to plug it into simhub
How can I do if I want to use with f1 2019?
It'd be cool if you showed us how to build a steering wheel
Wish i had a fanatec setup man...
As always super vid and very clever
thanks for the video,got everything wired up ok but for some reason only rgb leds 1-8 are working as intended,the 9-16 rgb are just plain white and lit al the time,any ideas?
Great video!!! I'm making a custom steering wheel for a Lamborghini Gallardo, can I also load this on an actual car ECU? Or directly to the rpm cluster?
I tried to do it and it worked!
Would it be possible to wire this into the button box or would you need a seperate Arduino just for the LED's?
With modification of code you could use one. However if you do not know your way around C and arduino. It is a lot easier just to buy another arduino. The chinese clone arduiono market is great for this because the cost less than 2 or 3 euros.
I'm asking because there doesn't appear to be a sketch for it .It more seems like the Arduino Interfaces with the software in real time. Hence I question if it's possible to make it run as a USB device as well simultaneously.
Ah sorry, I didn't notice this uses simhub. It seems that simhub sends data over serial so to do so it must overwrite any sketch on the arduino. While I am sure with some trickery you could use one arduino it will not be easy. At least that's my view on the matter.
I'm working on surporting arduino micro but for now it doesn't work, I hope to solve this in the month, it will allow simhub/button box hybrids
hi, is there a way for the LEDs to display the fuel consumption instead of the RPM of the engine?
I wanna make one for my car, so there is gonna be A LOT more LED's (i wanna make it look like an s2000 cluster) will this work?
Great DIY amstudio :)
Nice video ! Thank you, very interesting.
Your triple screens support looks good ! Which one is it ? I'm looking for something like yours.
I know this is an older video now but is there a reason you used two led strips instead of a single longer strip?
Hi, I just have one question, are the 3d models for the led lights and for the fanatec assembly? Both?
Hi Friend!! Could you tell me the layout configuration for RGB REV LIGHTS?
wee got it work with ACC> awesome share
Hell yea! Thanks for this guide.
Your mods are so awesome..
How did you cut the glass?
Like this ruclips.net/video/aLohcEFa850/видео.html
Yeah new video!
you can make some LEDs to turn off depending on the life and the bullets you have in the counter strike global offensive?
hello, which usb cable should you buy, the link is dead. What is his type?
Amazing but can it be modified to be used in real motorcycle
Hello, I´m bulding a F1 steering wheel and your videos are my principal inspiration, but I found the next problem, exist any way to decrease the brightness of the RGBleds? when I play in a dark room the lights make me blind
I really enjoy your type of making videos, Congratulations ;-)
But I have one question, can i use three or four led bars instead of two on a single arduino nano???
i cannot get the settings right to blink at rev limiter. any help for sim hub?
After uploading to the arduino, I can't get it working, only first led illuminated (Green), am I missing something?
This looks awesome but I have one question, can you achieve a similar effect using the board you showed in a previous video which contained 8x 7 segment displays and 8 leds? I think it was using the TM1638 IC as a controller
im running out of usb ports on my computer .would it work if i add this to my exsisting arduino board which my wheel hub and pedals are connected
Thaks a lot for all your video!!!
sorry a question
how to setup simhub rgb mapping????
Is it possible to share the .leds file to import in SIMHUB?
Hi I got a problem with uploading, it said upload failed, how can I solve the problem? Thanks a lot
Same it has come with me toooo anybody help
+amstudio what type of bracket did you use to hold the spring in place on your diy usb handbrake video? The right angled silver one?
One more time, amazing work... But I have a question... Is it possible to make with 9 LEDs only?
Yes its possible
How?, please, I only find 8 LEDs in one strip and I want 3 LEDs for every colour.. regards from spain
Hey. I am fascinated by your project presenting the engine speed display with LED strip. As I do not have experience in designing Arduino modules, I am asking for a hint. Will I be able to use one Arduino controller to connect the LED module and analogue Handbrake, which also show how to perform on your other film. Will the Arduino module be able to control the LED strip and be recognized by Windows as a pointing device? Thank you in advance for your answer and I am waiting for more inspiring fans to create new devices.
Hey there, i get the massage upload failed, dont know wheres the problem.. need help
So ok, I resolve my driver's problem, but, when I click on "upload to arduino" (with your procedure) a message appear : "upload failed"
Any ideas ?
Thx
This morning (I don't know why) the televersment is okay. "DETECTED HARDWARE" is okay, but nothing in game (Assetto Corsa) the LED's doesn't lighting.
Any ideas why ?
Thx a lot !
Thank you so much dude. You are awesome :)
After all this, can we still use the same arduino board to some buttons and switches? Or we only can use for this leds.
I want to make a F1 wheel is it possible to use the Nextion screen, buttons/switches and RGB rev lights all of one board.
hi! how do you cut perspex? Thank you! Love your videos.
Great! Im building this one but be aware not to buy arduino nano with ch340G serial chip onboard.... get the FTDI FT323RL or it wont communicate with simhub!
Hello, could someone help me? I did the same as in the video the second strip of LEDs does not work well, even if I increase the brightness the 2 strips begin to fail. Does it carry some kind of external source or some resistance? Thanks a lot
Once the Arduino is flashed do you still need to run the SimHub software and settings on the host machine for the LED's to function correctly? or is it just plug and play with any PC?
Hi @amstudio, ever thought of mounting them directly onto the wheel rim?
I'm considering to mount them to my TS-PC formula rim. There's a slot that seems made on purpose for such a mod. Of course I'll be doing the LED enclosure by myself. But what about the USB cable? Will it be a problem when steering?
Hi , did the mount works for the fanatec GT DD ?
Very good job !
"But" when I conect my PC to the arduino, it isn't recognized (bug from : USB 2.0 Serial )
Any ideas why ?
Thx !
can we do rgb led and gear indicator with just one arduino?