I have a tingling sensation that you may or may not, single-handedly save my architecture degree. Learnt so much new stuff from this single video. Keep it up
Your video is very informative and unique. It helps to improve our designing skill . It's a request please also make video on how our design should be installed in real life example through animation. How the glass will be placed outside the building and how the supportive piller would hold on different angles
Thanks. There is an example video about it. I even made the model video. Project: Grotto Sauna Architects: Partisans Tutorial: ruclips.net/video/17sfI4E3oW4/видео.html Video: ruclips.net/video/x6Ou0ZUh7ik/видео.html Achdaily: archdaily.com/574851/grotto-sauna-partisans
Hi Adam, it will be super helpful if you talk in the videos, sometimes it's a little hard to follow what tools you are using (the overall process would be more efficient if we hear your instructions), but thanks for the videos.
El diseño original de la mariposa es de un arquitecto cubano y forma parte de la ciudad deportiva de Cuba que se contruyo antes de 1959, busquen la informacion y datos oportunos.
Hi Adem, I like the videos your posting, so cool to work allong with it. It would be very usefull to also showcase the steps you make. This would make it more easier to follow your steps, especially for noobs like me ;p
at 3:05 the moment you clock on the first subd it highlights green and you are able to move control points throughout the surface independently. then I noticed that once the first subd was complete it resulted in a formal mass rather than extruded, i would definitely need help on that part for I am experimenting on my mac while im away fro the pc powerhouse. thanks!
شكرا جدا لحضرتك استفدت كتير من محاضرات حضرتك♥️ بس عندي مشكله ف بداية المحاضره دي ممكن اعرف لما ب create subD plane فالدقيقة 2:55 بيظهرلي اللاير باللون الاصفر وبضغط ctrl+shift وبعمل اكسترود وانا ماسكه الdots بيحرك البلان كله ولو ضغطت alt بيعمل كوبي للبلان كله مش زي ما حضرتك بتعمل ..ممكن اعرف اي المشكله لو سمحت ..مع العلم ان الedges والdots بتظهر لونها اصفر مش اخضر زي حضرتك ..!
@@AdamArchh thank you! Perhaps you can recommend me the soft to create Jewelry ? I’m full of ideas and going to learn to create CAD models of the jewelry.
Hey, Thank you for the tutorial! My sbd shows in two different shades after mirroring, do you know why is that would that be happening? can't attach the image to show (
Hi thanks. If you want to show both faces the same color, right click on Reflect. But remember this. After pointing both sides in the same direction, the Reflect tool is now ineffective and you have to work with both sides separately.
Hi Adam, thanks for your helpful tutorial, i have question about those navigation that appears when you click on surface or points, how could i find it, it won't appear automatically for me.
thanks for the video, I wanted to make these kinds of nurbs or double-curvature modeling to real model, but how do you unroll of unfold double curvature models or nurb models?
@@AdamArchh can you tell why when i try to split the 2 objects, then it said "Split failed, objects may not intersect or intersections may not split object." then why i try to swap the objects, it can complete splitting but the main object become messy.
Hey Adam, I'm having problems splitting the glass and carriers with the subd roof. Do you know why this might happen? Did you explode the subd before splitting? Thanks for the video btw!
Hello, it means that they do not touch each other exactly. First create curves with intersection command between roof and carriers, then use these curves for split.
@@designerjuly2437 Hi, the tool you need to extrude the edges is to drag the middle point. If you drag the edges using the midpoints on the gumball it creates a new face.
Hi Eddy. First select a surface or edge by holding down Ctrl+Shift. Then grab and shoot the signs in Gumball. If you pull the arrow it will move. If you hold the small dot in the middle, it will extrude.
when im doing the split order it show me an error says ''Split failed, objects may not intersect or intersections may not split object.'' what should i do ?
I dont think I caught the detail but how do you make it so the picture frame doesnt interfere with drag selections, I keep selecting the picture itself in attempt to drag selection i drag the picture itself, like for instance 3:36?
In this link you can see Rhino's Gumball tool. With number 1 you can move objects freely in any viewport. - docs.mcneel.com/rhino/5/help/en-us/image/topic_illustrations/gumball-001.png
I have a tingling sensation that you may or may not, single-handedly save my architecture degree. Learnt so much new stuff from this single video. Keep it up
Glad to hear these. I will continue to share. Thank you.
Congratulations for the music, very good taste.
Your video is very informative and unique.
It helps to improve our designing skill .
It's a request please also make video on how our design should be installed in real life example through animation.
How the glass will be placed outside the building and how the supportive piller would hold on different angles
Thanks. There is an example video about it. I even made the model video.
Project: Grotto Sauna
Architects: Partisans
Tutorial: ruclips.net/video/17sfI4E3oW4/видео.html
Video: ruclips.net/video/x6Ou0ZUh7ik/видео.html
Achdaily: archdaily.com/574851/grotto-sauna-partisans
This music is so calming and relaxing. This video is so full of useful tips and knowledge. Nice work. Great skills. I really enjoyed watching it.
Thanks for the nice comments.
Well done ! Actually we can use subd to create works like Zaha with consciousness.
Nice work. I use always sketchup but with your videos its seems so easy to use rhino
Thank you. Abderrahmane
Nice work
Hi Adam, it will be super helpful if you talk in the videos, sometimes it's a little hard to follow what tools you are using (the overall process would be more efficient if we hear your instructions), but thanks for the videos.
Thank you.
Your videos is very very helpful Thanks a lot *-*
Glad you like them!
thanks, keep up the good work
Thank you Salam Ayad. We will always continue.
Great job
Zaha's Masterpieces of Archs🔥🔥🔥🔥
Nice tutorial!
Thank you.
So, thank you! Where is the reference images? From link get different image. Thank you again!
So sorry,
Project link: www.archdaily.com/161116/london-aquatics-centre-for-2012-summer-olympics-zaha-hadid-architects
I modelled this building in Cinema 4D with full interior. Good job though.
Thanks and congratulations. Modeling this building in Cinema 3D is very difficult.
Que buen tutorial! Muchas gracias 👏🏻👏🏻👏🏻👏🏻👏🏻
Great Content
Thank you
Thank you a lot , I very liked your videos 🤩🤩🤩🤩🤩🤩
Thank you too.
Я восхищен!!!😍
I very much aspire to become a famous and successful architect I love it💞💞💞💞
Of course you can if you work hard.
@@AdamArchh waoo thank you so mach, I have a question please are you an architect?
I am an interior architect
@@AdamArchh It's very interesting, I wish you success always
really nice!!! congrats!
Thank you
El diseño original de la mariposa es de un arquitecto cubano y forma parte de la ciudad deportiva de Cuba que se contruyo antes de 1959, busquen la informacion y datos oportunos.
Gracias por la información.
Hi Adem, I like the videos your posting, so cool to work allong with it. It would be very usefull to also showcase the steps you make. This would make it more easier to follow your steps, especially for noobs like me ;p
Hi Mehmet, thank you. There is no sound in their first video. However, I recommend you to watch our latest videos. We voice all the stages in detail.
Her hebi adem
Selam Sami bey
Mükemmel bir iş
Thank you so much!!
Thank you too
Well done bro, is the software easy for using ? like sketchup
Hi Kurdman. It is an even easier program than Rhino SketchUp.
@@AdamArchh So Rhino easier than skp right ?
For me. Yes
عمل رائع جدا ،سلمت يداك
شكرا
at 3:05 the moment you clock on the first subd it highlights green and you are able to move control points throughout the surface independently. then I noticed that once the first subd was complete it resulted in a formal mass rather than extruded, i would definitely need help on that part for I am experimenting on my mac while im away fro the pc powerhouse. thanks!
Holding Ctrl+Shift click edge and then you can extrude by holding the dot on the gumball
I was looking also help in this part. I'm gonna try. Thanks
@@AdamArchh Luckily find this coment,Thank you so much!
Nice tutor
Thanh you
شكرا جدا لحضرتك استفدت كتير من محاضرات حضرتك♥️ بس عندي مشكله ف بداية المحاضره دي ممكن اعرف لما ب create subD plane فالدقيقة 2:55 بيظهرلي اللاير باللون الاصفر وبضغط ctrl+shift وبعمل اكسترود وانا ماسكه الdots بيحرك البلان كله ولو ضغطت alt بيعمل كوبي للبلان كله مش زي ما حضرتك بتعمل ..ممكن اعرف اي المشكله لو سمحت ..مع العلم ان الedges والdots بتظهر لونها اصفر مش اخضر زي حضرتك ..!
انا كمان
There should be key pop up in corner to show what shortcuts you are using
In a minute 2.55 I did the same thing, but the result is a rectangle, not a semi-circular shape
Tab key
Is there a way to know what he is doing? I cant see most of the commands or hear anything. Are these tutorials for only for professionals?
Achievements of Arab Zaha Hadid, the first female engineer in the world, may God have mercy on me
اذا تلاحضين مخلاللج قلب عبرك
Great video, what enviroment map are you using here? Thank you
Thank you. (arches.png)
thx
Nice tutorial sir, could you link up the music
I guess that's the music:
- ruclips.net/video/yfK5qRoEKiY/видео.html&ab_channel=Musicoth%C3%A9rapie%26Relaxation
@@AdamArchh thank you :)
I don’t understand what you did in the beginning when you made a line over the scale at 0:37
I used the scale command; and rescaled it to 5000 cm.
@@AdamArchh thank you i got it now♥️
I am sorry, what is the name of the soft? Thank you.
Hi Artem, Software is Rhino 7, and tools are SubD
@@AdamArchh thank you! Perhaps you can recommend me the soft to create Jewelry ? I’m full of ideas and going to learn to create CAD models of the jewelry.
Fully inspired of Zaha’s creativity, Musk’s activity and I know I’ll find my boiling place between them
Hey, Thank you for the tutorial! My sbd shows in two different shades after mirroring, do you know why is that would that be happening? can't attach the image to show (
Hi thanks. If you want to show both faces the same color, right click on Reflect. But remember this. After pointing both sides in the same direction, the Reflect tool is now ineffective and you have to work with both sides separately.
Dear teacher, can you teach us sheet metal training in Rhino and Grasshopper, thank you very much.
Hi Adam, thanks for your helpful tutorial, i have question about those navigation that appears when you click on surface or points, how could i find it, it won't appear automatically for me.
Hi, enable the Gumball
- rhinocentre.nl/wp-content/uploads/2017/11/Fig-46.png
@@AdamArchh thank you so much for your quick reply .your tutorial really helped me in my project I hope I could show you when it finish
thanks for the video, I wanted to make these kinds of nurbs or double-curvature modeling to real model, but how do you unroll of unfold double curvature models or nurb models?
Try this,
- ruclips.net/video/umeWTegQkHA/видео.html
Is this the most efficient way or the most slowest and basic ?
Hi
How do you make it all one mass in 5:20 and when I use sub plane the corner it's not rounder
Can you help me please
Hello. If I understood you correctly. The command you should use should be remove crease.
5:50 what did you press show that new line
Right Click insert subd
@@AdamArchh can you tell why when i try to split the 2 objects, then it said "Split failed, objects may not intersect or intersections may not split object." then why i try to swap the objects, it can complete splitting but the main object become messy.
hi, when i followed you why cant i split it like you at 15:00, info:cant meet together
Hi. First select all windows and carriers (except the roof) then press the split command. Then select the roof and enter.
could u send a link to download the already made rhino model for this
What sofware you use?
Rhinoceros 3D, version is Rhino 7, tools are SubD tools.
I can't find subd in v6,did it had another way?
Hi Iyn, SubD can only be used with Rhino 7.
and there are courses
When I try your step at 3:03 my shape does not create new cross lines with points for me to select. Do you know what I’m doing wrong?
Press and hold Ctrl+Shift to select an edge, then press and hold the middle point on the gumball to extrude.
@@AdamArchh Hello Adam, im new with Rhino. Ctrl+Shift works but when i extrude it shrinks back like elastic... What im doing wrong?
Witch software did u use
Software name is Rhinoceros 3D. This version name is Rhino 7 SubD.
why dont you use paneling tool rather following this long steps for windows
Paneling Tools is not available in Rhino and some students are having trouble downloading and using it. So I tried to do all the work with Rhino.
@@AdamArchh thanks ,,please try some industrial or automobile details in sub d
@@faisalazamkhan3240 Thank you for your support.
i wish she knew how to speak english. would be nice to hear instructions
Is this possible with Rhinoceros 5?
For this method. To can not. But you can download T-spline plugin
Hey Adam, I'm having problems splitting the glass and carriers with the subd roof. Do you know why this might happen? Did you explode the subd before splitting? Thanks for the video btw!
Hello, it means that they do not touch each other exactly. First create curves with intersection command between roof and carriers, then use these curves for split.
@@AdamArchh Thanks for the quick reply
How did you add the edge to the SubD plane at 3:03?
Hold Ctrl+Shift and select edge
@@AdamArchh everytime you drag the edge, another edge appears, and you can change the direction of dragging, how did you do it? thank you
@@designerjuly2437 Hi, the tool you need to extrude the edges is to drag the middle point. If you drag the edges using the midpoints on the gumball it creates a new face.
can you theo me how to creat elip in 2:57 , i just did it like you but only rectangle ??
Try press Tab key
What software were you using
Rhinoceros 3D
Ok, thanks Adam
How did you reflect the shape at 7:24?
Reflect SubD object. And select X or Y axis from command panel. I selected X axis on this tutorial. and 0 enter.
it is possible only with rhino 7?
Yes, Possible.
@@AdamArchh so, isn’t possible with old version of software (5-6….etc) thank you!
🔥🔥🔥🔥👍🏻
How do you extract each panel shopdrawings?
Using Grasshopper
@@AdamArchh Can you make the video for it?
I can't elongate the subD plane
Hi Eddy. First select a surface or edge by holding down Ctrl+Shift. Then grab and shoot the signs in Gumball. If you pull the arrow it will move. If you hold the small dot in the middle, it will extrude.
Programe name plz
Rhinoceros 3D
3:01 for my subd plane i cant choose only that 3 points insted it chooses the whole plane.any solutions?
Hold Ctrl Shift
@@AdamArchh thanks a lot
when im doing the split order it show me an error says ''Split failed, objects may not intersect or intersections may not split object.'' what should i do ?
Hi, first use intersect command then split using these intersection lines
How can I hide or eliminate the grid that appears on the curve shapes? I saw another videos of your channel and sometimes those grids doesn't appears
Options - View - Display Modes - Shaded - Visibility - (Dissable) Show Isocurves
NIUBI
Apa nama aplikasinya???
Rhinoceros 3D. Rhino 7
@@AdamArchh 👍👍
I dont think I caught the detail but how do you make it so the picture frame doesnt interfere with drag selections, I keep selecting the picture itself in attempt to drag selection i drag the picture itself, like for instance 3:36?
Hi, First select the image then use the Lock command
@@AdamArchh Ah ok thank you! Appreciate the tutorials as well really helping me prepare for this coming upcoming semester of university
@@Akhiii_ Thank you
👏👏👏👏👏🙆
How to use this dot in 3:02(in video)?
Use the gumball to extrude
- Number 13 in this image
- docs.mcneel.com/rhino/6/help/en-us/image/topic_illustrations/gumball-001.png
@@AdamArchh But that dot doesn't appear and I'm not able to extrude the sub d object keeps moving around.
❤
How to drag subd plane it's not working for me... It's working only in xaxis
In this link you can see Rhino's Gumball tool. With number 1 you can move objects freely in any viewport.
- docs.mcneel.com/rhino/5/help/en-us/image/topic_illustrations/gumball-001.png
everyone is looking for this comment! DRAG THE CONTROL POINT AND BEFORE YOU LET GO HOLD CTRL
Teşekkürler
👏👏👏👊👊👍👍
Can I get the model?
Software name pls
Rhino 7
Gruß
Hi how did u enable those moving arrows in blue and red.?
Hi Uati, Activate Gumball in the lower-middle part of the screen. This feature is only available in Rhino 6-7 versions.