OMG! You are amazing! and ##!!$$ awesome! I've been struggling with how to connect linear actuators to a toggle for a week now with no success! Thank you! Thank you! Thank you!
Great video. I rigged something like this in my rv bathroom. When looking for a switch remember 2-pole with 6 contacts, a single pole with 3 contacts won't due you any good. Also in most applications you will probably want to a "latching" or "maintained" switch, not a "momentary". On several occasions I've accidentally ordered momentary switches.
Thank you very for your great video. The same I was taught to the students and they are able to meneuver the DIY robot in learning and doing project 2023.
Thanks, this is exactly what I needed but the problem that I'm facing is that instead of a toggle switch, I need a push button switch so that when the vehicle collides with something such as a wall, it reverses the direction. So do you guys know if a push button DPDT is available in markets?
Can I use this DPDT on swapping power from 2 separate power source 2 by 12VBATTERY?When one get weak then I will switch to the other one with full charge.
Is it possible to get a corded drill to go backwards and forward on a timer, say two minutes forward two minutes backwards and repeat, it's for a project, and if it's not fairly easy, could it be possible on a battery drill thanks in anticipation.......
Hey dude, I bought this switch for my wiper motor to turn it from left to right rotation, but didnt realise it was a momentary switch. Would anything happen if i keep the switch closed and control it with my wiper switch?
Not to be negative, (no pun intended) but you didn't switch anything when you said you could switch it around. The same wires went to the same places! The two double wires went to the motor in both ways and the two single wires still went to the power supply. You might as well have said "head I win & tails you lose."
You made this so simple and easy for me. THANK YOU!!!!!!
Thank you for explaining that it doesn't matter which wires run to the battery, that it works either way. Best Regards.
This must be like the easiest way to connect it. Thumbs up dude
So much searching trying to find a smple breakdown since electronics are my nemesis. You'r video was exactly what I needed! Thanks!
Genius. one switch replaced an entire $100 circuit board.
Thanks, needed to fix a K'nex motor switch. Saved a lot of head scratching.
OMG! You are amazing! and ##!!$$ awesome! I've been struggling with how to connect linear actuators to a toggle for a week now with no success! Thank you! Thank you! Thank you!
Simple & easy to do. Thanks for the useful information.
that poor crying starving child locked up 23 hours a day in the background
damn this guy has done this a few times - thanks bro
Great video. I rigged something like this in my rv bathroom. When looking for a switch remember 2-pole with 6 contacts, a single pole with 3 contacts won't due you any good. Also in most applications you will probably want to a "latching" or "maintained" switch, not a "momentary". On several occasions I've accidentally ordered momentary switches.
Big LIKE, very good and simple explication !!!👏👏👏
Thank you very for your great video. The same I was taught to the students and they are able to meneuver the DIY robot in learning and doing project 2023.
Thank you for posting this.
Thanks bhuthi badhiys information sir is tarah ham air blower ko reverce conection karke vacume cleaner bana sakte hai ya nahi please guide me thanks
Thanks a lot my friend i really needed this!! Keep this good job!
Great video. My winch switch went bad helped out in a pinch
Thank you for making it simple stupid not complicated at all people make it look complicated
Thanks man. I do not have the same switch as you but it is the same momentary. Eureka it works. 😃👍
YESSS! THANK YOU!!!!
Thanks man
Thanks a lot...
Thanks 👍
Used on a small electric motor that drives a model railroad turn table . Excellent thanks !
Awesome, just what I was looking for. Thanks mate
2:24
Don't mind me, just taking notes.
Thx man
Simple video but very helpful.. So awesome thanks for this
Can you do this for a BLDC motor? If so, can you please show a video on that keep up the great work love what you doing❤❤❤
My robotic arm will work now, thanks :)
Didn't explain anything, thanks 👍
Thanks, how the connection will be using a controller? Like the TDPRO YK31C
Best👏 I was looking for this for a week, if you could have added a diagram !!
What is the green work sheet called
Thanks, this is exactly what I needed but the problem that I'm facing is that instead of a toggle switch, I need a push button switch so that when the vehicle collides with something such as a wall, it reverses the direction. So do you guys know if a push button DPDT is available in markets?
Can I use this DPDT on swapping power from 2 separate power source 2 by 12VBATTERY?When one get weak then I will switch to the other one with full charge.
Awesome thank you!
Will just having a switch keep the speed consistent both ways
Is this the same set up if I wanted to wire 6 of these switches in one box?
Thank you!
How much voltage is that battery supply
Is it possible to get a corded drill to go backwards and forward on a timer, say two minutes forward two minutes backwards and repeat, it's for a project, and if it's not fairly easy, could it be possible on a battery drill thanks in anticipation.......
THANK YOU!!!
What type of switch is it please,....? Is it something like a double pole momentary push or something..?
Hey dude, I bought this switch for my wiper motor to turn it from left to right rotation, but didnt realise it was a momentary switch. Would anything happen if i keep the switch closed and control it with my wiper switch?
Thank u very clear
thanks alot
can you provide a direct link to this switch? or better yet, a version that is NOT momentary?
a year later but FIRST!!!!!
Congratulations, your prize is nothing
So im completely new so what happens if ou buy a 7 pin but want to do this. Will it still work?
can i use 2 switches for the same motor?
Not to be negative, (no pun intended) but you didn't switch anything when you said you could switch it around. The same wires went to the same places! The two double wires went to the motor in both ways and the two single wires still went to the power supply.
You might as well have said "head I win & tails you lose."
Awesome video, thank you. Could you do a reverse forward switch with a varying speed controller...?
Thanks
👍
Thank u
Do I need to have 12 volts for this or can I use any voltage
Late response - but this should work with any voltage (as long as u dont damage ur button lol)
Hold it still so we can see Its impossible to stop the video on a clear point as well
Great information, but would have been better, if there was no crying baby in the background.....
Rude bro some people have babies, it's ok. .
$
Good job , may I have your email . Tks
That’s great thank you 🫡😊
Thanks 👍
Thanks