After cranking, disengage the safety rail, hold the bar over your desired cut, and rev the engine to oil the chain. You will see it make a line of oil on the piece to be cut.
*Pull the muffler and mod it. Re-install the modded muffler and tune the fuel mixture to match the increased airflow, then you'll really see how much power that saw really has. You'll be surprised at how restricted those mufflers are from factory.*
Would be excelent if someone could either teach this guy how to run that saw or take it from him. That bog in the cut and then trying to run it WOT with the chain brake on makes me want to do violence lol...when he blows it up send it to me, ill appreciate it
With a bar that long, it's nice to have a jig to hold the far end off the bar, while you put the chain on... Or someone else to help you? That's usually a luxury!
@@JamesHarris- Yes, There are quite a few of us, aren't there? Blessings Too You This Holiday Season... P.S - Nice Too Meet You James Harris... It Was A Pleasure...
And he did it once again... Why are you revving engine with brake engaged? You totally destroyed clutch in few seconds ant that's the reason why is it getting stuck while you cut that log.
Yep , a stihl ms880 will cost you about two grand now . Those chinese knock offs work pretty well for what I've heard That looked like maple too , tough wood to cut . Oh yah , the stihl is without the bar and chain . A 42"bar AIN'T cheap either .
You have to break the saw in easy on the first half tank to full tank. You will get longer life. You should always tune it as they are set for China's altitude.
When is he gonna understand, that he is ruining the clutch by reving it, while brake is on
It looks like he's tensioning the chain with the brake on as well 🙄
@@JoshuaCollins also looked like had bar nuts tightened some at least while trying to tension chain as well
Starting the chain moving in contact with the wood aint great either.
He's probly a special person
When the chainsaw becomes a pencil
After cranking, disengage the safety rail, hold the bar over your desired cut, and rev the engine to oil the chain. You will see it make a line of oil on the piece to be cut.
I believe you have to disengage the brake when starting.
he does this to every saw lol :D
When starting the saw always engage the break, as soon as the engine is running disengage the break and then you rev the engine
Always leave the chain a little bit loose. If you tighten it up on maximum your chainsaw will struggle more to spin the chain.
One day you get to meet taras at his home for whatever reason you look in the backyard and it’s just 1000s acres cleared to stump
After 3 tanks of gas you can get it tuned, that's when the break in is done and it'll run even stronger.
Where do you List your yard sales for all the lesser Junk you buy?
Lets see how long it lasts compared to a Stihl or a Husky.
fun fact every single part on that saw is exactly replaceable by a stihl part and vice versa
Lol it want be a good test with this guy running them the stihls clutch should be burnt from his last video
it lasted exactly 2 days
It's all the same or it's overpriced for the name..
It is a Stihl. It's a 661 clone quite literally.
Dude... That chain was waaayyyy to tight!
How to blow up clutch tutorial!
Now buy a mill attachment and make lumber.
*Pull the muffler and mod it. Re-install the modded muffler and tune the fuel mixture to match the increased airflow, then you'll really see how much power that saw really has. You'll be surprised at how restricted those mufflers are from factory.*
i farted
@@mannybak *Good, now inhale and swallow it.*
@@mannybak I tooted.
The bold is so necessary
you have that chain way too tight
Would be excelent if someone could either teach this guy how to run that saw or take it from him. That bog in the cut and then trying to run it WOT with the chain brake on makes me want to do violence lol...when he blows it up send it to me, ill appreciate it
Hahahahah 🤣😂😂😂
you're right 💪💪💪
Did you oil the chain? Lol you gotta have chain spinning before you touch the log too 😂
The chain isn't supposed to be that tight
and he set the chain on incorrectly at first.
He came in to my work the other day he is literally 7foot basically 😂
Taras kul?
@@LuisC7 he is 6ft 7 inches tall
Liar
Thank you for the vids I’ve watched you for years !!
Ok
That is a BEAST of a chainsaw !!!!!!!!!!!!!!!!!!
With a bar that long, it's nice to have a jig to hold the far end off the bar, while you put the chain on...
Or someone else to help you? That's usually a luxury!
@@JamesHarris-
Yes, There are quite a few of us, aren't there?
Blessings Too You This Holiday Season...
P.S - Nice Too Meet You James Harris... It Was A Pleasure...
With a smaller bar it would probably be a lot better
30 inch bar thing would eat through twice as fast
Taras. Please get better safety equipment. You need it.
Awesome saw! I would definitely recommend you wear chainsaw chaps!
And ear plugs or a headset.
@@NightBazaar Absolutely hearing protection is an absolute must
What? Speak up.
I love them feet protection he has on as well.
What ever happened to Safety is #1 priority?
how many saws do you have?
And he did it once again... Why are you revving engine with brake engaged? You totally destroyed clutch in few seconds ant that's the reason why is it getting stuck while you cut that log.
Saw will probably start running better after a bit of cutting.
Off to eBay again lol and then to buy that $29k property of trees in WA that I put off thinking I'd need to spend an extra $15K to hire someone.
I'm in Washington. Kitsap County to be exact. Good luck with that
04:55 who else remembered gta vice city?
😂😂
Yep , a stihl ms880 will cost you about two grand now . Those chinese knock offs work pretty well for what I've heard That looked like maple too , tough wood to cut . Oh yah , the stihl is without the bar and chain . A 42"bar AIN'T cheap either .
especially sugar maple
Got that right!
20yrs ago 42" bar was 400. Must be more now
Love your videos Tarus. Keep them coming
Tarus??
Wonder if it available here in Canada. A 365 husky runs about $700 here.
Can you do a video one day of your Chainsaw and Knife 🔪 Collection I’m pretty sure that would be impressive collection 🤙
You need to get that saws engine ported and polished.That would make things interesting.
How much is this in Philippines?
what were you using that log for?
I'd like to know the brand and model please..?
This is a really hard wood too man.
WOW!!! IMPRESSIVE!!! I WANT ONE!!!
How much is the price sir
Thanks for the sweet chainsaw music man.
Nice and sharp thanks for sharing.
The new Top secret version of Blue (beast) STIHL 😎🤫😂😂
Recently had a saw blade almost Cut my thumb and hand in half be careful pls guys
Cảm ơn bạn đã chia sẻ video rất hay 👍
Merry Christmas tarus hope you and you wife and kid is doing well
Well it has 120cc two stroke engine thats bigger than two scooter engines combined
Merry Christmas Taras to you, your family and the dogs. Looks like you got a new toy.
🎅🎄❤
Keep up the awesome videos 😊
something that large and heavy is kinda cumbersome for firewood i would imagine. gonna do some milling?
You can tell he’s excited
Get to the chopper 😂
My 455 Husqvarna has more power than your saw, I run 28 inch bar
the only way to prove that is put a 42 inch bar on yours and then we will see
Congrats
That 120cc blue saw has 2x more power than your 55cc saw
@@relaxingnature2617 in theory at least.
this saw struggles to cut soft wood even a 55cc saw would be better haha
Looked like Oak to me, and that isn't soft wood.
@@nathankoroush7918 🤙
By all means take a 55cc to a tree that large and post of video of how it does.
Poplar is pretty soft when cross cutting
You have to break the saw in easy on the first half tank to full tank. You will get longer life. You should always tune it as they are set for China's altitude.
That chain is way to tight
Also leave the brake off when you start it
Brake on to start then immediately off to warm up
Herd that!
I might buy me one looks like a great chainsaw
Wait till you put an unlimited coil on it and modify the muffler. It can really pull some chain
I use only blue max 99 bucks for a 20" 55cc cuts for years has a pro chain
Do they still make blue max? I bought a 45cc a few years ago, been a really good one. Wish I could find the 55cc one.
Mesin senso yang sangat menarik 👍👍 bagus bos 👍👍
Piły nie odpala się na hamulcu i później jej nie gazuje bo sprzęgło chuj strzeli widać że słabe obycie ma z takim sprzętem
Neat
$1400 is cheap. Wow
Cheap compared what a name brand chainsaw of that size would be
@@nathanh3975 I know nothing about chainsaws, but that is crazy that the minimum is $1400
@@TheStickCollector it's a big saw at 120cc.
Nice work brother ❤️🇵🇭 👍👍
finally a break from the precious metals.
you made the chain to tight, loose-it a litle bit
I watched till 6:37 you scare me with that saw lol
That’s very good cutting video! Do you have interest in promoting Farmertec products by shooting videos on social media?
Oh my God he is destroying that clutch
the Texas chainsaw massacre be like
Chainsaw???
You need some Buckin’ Billy Ray Smith in your life
Only he says Bruh but anyway I love your videos and I have been here since the beginning
I'd love to have one.
Then buy one
Nowdays, youtubers think they know everything
Maybe because the clutch is still engaged
Beautiful machine.
If it was a 36 Long shaft it would work better than that 48
I have used a sthil 170 that cuts as fast or faster
Nice chainsaw!
Hint:
The saw is fine.
MERRY CHRISTMAS SENT CARD....................................
Taras ….. I like to chap ( chop ) wood too !
Just a wild guy doing something....We do ha rules at chainsaw community
Nice vid
$720? Are you nuts
Wow
Good video
Dang
Wooooooo‼️✅👀💭👍🏻
God can do anything and anyone is welcome to go to church.
Te hozzánemértő ohh teeeeee.
Can you do more mre videos plsss🙏🙏🙏
Вов! А Кен биливинг, ю аре а гуд дровек
Fries the clutch 🤦♂️
Chain is a little tight
BOOM
Port that saw..
That saw is to much for him.
👍🏾
And clutch smoked