Very nice George. Scorpion is also definitely worth a look. Looks similarly laid out to this Deici. Auto handbrake with the scorp which is disengaged by pressing the brake and shuttling. shuttle is on left hand side of joystick and boom in out on right, so the opposite of Deici. Also, a nice feature is that the pick up hitch goes through an automated sequence to unlock and lower. When you press down, it actually goes up, unlocks the pins and then lowers. pretty handy tbf and also very good mirrors all round.
Not sure if you know but the new jcbs have got the button for dumping the hydraulics without turning the engine off, also a few other good buttons, there is a 3 way toggle switch which if you use the single bottom button on the joystick(with the toggle switch down one way) it allows you to rattle the bucket violently or gently. Also the constant flow hydralic for eg. A road brush. It think this is on the older models aswell. But that Dieci looks like a good machine though :)
Looks a reasonable machine but that exhaust stack looks to be in the way, also the resale value won't be good. I think you should try a claas scorpion as they're a great machine, I believe the best on the market and they make them up to 9 meters and 5.5 tons.
I think you need to try a merlo there a great machine we have had two , also I think it could load/unload a lot quicker than the jcb and deici as it has boom speed and all that stuff and the joystick is a bit like jcbs
rob dennison we have a merlo 21 breakdowns in 500 hours. We have always kept to service intervals and greased every 10 hours.biggest heap of shite ever.these are all the problems in only 500 hours. Fordward back lever stopped working twice Front universal drive joint broke Front tie rod came out Back tie rod came out Main Hydraulic pump hose blew 3rd service pipe broke and boom came out and the boom hoses were replaced Assist ram hose burst Lift Assist ram pin broke in half Main ram seal replaced and pin rebushed Tilt ram seal replaced,ram spare polished Tilt bushes replaced Locking pin bent and replaced 3rd service stopped working one way and it is intermittent and happens constantly Boom only slides one way Hydraulics only work if you turn steering wheel Park brake switch doesn't work Heater doesn't work Radio doesn't work Boom joystick went loose and the connections broke Starting fuse keeps on blowing Main ram hose burst Won't start fuel shortage to engine Diff lock doesn't work Wouldn't switch from 2nd to 1st gear multiple times and you have to get out to change it Metal filings blocking the valve bank 3 times Hydraulics only work with the steering wheel again Front king pin Bush replacement
Very nice George. Scorpion is also definitely worth a look. Looks similarly laid out to this Deici. Auto handbrake with the scorp which is disengaged by pressing the brake and shuttling. shuttle is on left hand side of joystick and boom in out on right, so the opposite of Deici. Also, a nice feature is that the pick up hitch goes through an automated sequence to unlock and lower. When you press down, it actually goes up, unlocks the pins and then lowers. pretty handy tbf and also very good mirrors
all round.
Very nice, you should have a look at manitou as we have found them very good and well laid out
Tomo Thomas yes manitou
كم سعر
JCB do have a button to drop the pressure on the AUX hydraulic as the 2 we run have it
Not sure if you know but the new jcbs have got the button for dumping the hydraulics without turning the engine off, also a few other good buttons, there is a 3 way toggle switch which if you use the single bottom button on the joystick(with the toggle switch down one way) it allows you to rattle the bucket violently or gently. Also the constant flow hydralic for eg. A road brush. It think this is on the older models aswell. But that Dieci looks like a good machine though :)
Nice George!
can someone explain adblue to me, does the machine need adblue all the time will the red diesel or can it be used as a diesel or adblue seperatley
Adblue (Urea solution) is injected into exhaust gas to reduce the harmful NOx emissions of the diesel engine.
You still need Diesel to run the engine.
EIRE-Daniel11
EIRE-Daniel11
+HughzieTube okay thanks
+EIRE-Daniel11 does the machine always need adblue?
nice looking loader 👌
If I'm correct a class scorpion was a dieci until they went to leibherr
will this grab pick up bales end on ? load across trailer ,strap front to back. head and tail gates ?
if the engine is on the right how is it powering the wheels ?
hydrostatic transmission
Silly question what the make of that spike
If you can try and get a demo for a new Holland loader I would go for they are very good
Bloody good bit of kit that George there's a deici dealer near me look nice machines 👍
What you need is a manitou George, you'll never look back!
What does John think to it?
Good vid, get the Agripro with dual tech on demo next 👍
You should try a manitou
How far away is your farm from Hertfordshire
What do you do with all those bales?
do used jcb 3cx in yard
should use the bucket to clean up around the yard
thts a sexy telehandler good all round view
How many jcb's do ye run?
We got one it's been plagued with electrical issues now it won't boom in out again constant problems get a. Merlo
Looks a reasonable machine but that exhaust stack looks to be in the way, also the resale value won't be good. I think you should try a claas scorpion as they're a great machine, I believe the best on the market and they make them up to 9 meters and 5.5 tons.
Is that 40kph or 40mph on the back? Pretty nippy for a loader if its the latter!
Geeves8612 it would be kph as that is what we use in the uk for agricultural vehicles.
I think you need to try a merlo there a great machine we have had two , also I think it could load/unload a lot quicker than the jcb and deici as it has boom speed and all that stuff and the joystick is a bit like jcbs
yes they are good. we had a Manitou but a merlo is better
rob dennison we have a merlo 21 breakdowns in 500 hours. We have always kept to service intervals and greased every 10 hours.biggest heap of shite ever.these are all the problems in only 500 hours. Fordward back lever stopped working twice
Front universal drive joint broke
Front tie rod came out
Back tie rod came out
Main Hydraulic pump hose blew
3rd service pipe broke and boom came out and the boom hoses were replaced
Assist ram hose burst
Lift Assist ram pin broke in half
Main ram seal replaced and pin rebushed
Tilt ram seal replaced,ram spare polished
Tilt bushes replaced
Locking pin bent and replaced
3rd service stopped working one way and it is intermittent and happens constantly
Boom only slides one way
Hydraulics only work if you turn steering wheel
Park brake switch doesn't work
Heater doesn't work
Radio doesn't work
Boom joystick went loose and the connections broke
Starting fuse keeps on blowing
Main ram hose burst
Won't start fuel shortage to engine
Diff lock doesn't work
Wouldn't switch from 2nd to 1st gear multiple times and you have to get out to change it
Metal filings blocking the valve bank 3 times
Hydraulics only work with the steering wheel again
Front king pin Bush replacement
sorry know you've been probally asked a million times but why do you have so many bales all outside like that?
the controls are very similar to the claas scorpion
JCB is good but leihberr is really expensive about £85,000 for a telehandler
Sounds to me like someone wants one
This is the competition JCB. r these machines counterbalanced ?
Can't beat a jcb or caterpillar you should try demoing there new ones
I think they just get offers to demo things. I don't think they get to pick and choose.
Dieci is the Italian word for the number ten, BTW
20:52 Mama dieci haha
ما هو سعر
We have one on the dairy farm I work on and it a complete waste of time, spends more time at the dealership.
Get a Claas scorpion!
try the new jcb it is better than that
stay with jcb
Yes sorry remember now thanks
manitou is the best machine a 634 or 840
heeeey george love your videos but man se a doctor about that coooooooold....
£45000 would be a good price if it was new. not with 1500hrs
dieci is bad jcb and manitou are the things
try a cat.