How to Replace Front Sway Bar Links 11-15 Chevy Cruze

Buy Now!
New Sway Bar Link Set from 1AAuto.com trq.video/ia-1...
Sway bar links connect the sway bar (stabilizer bar) to other suspension components. They have a movable joint that can be damaged or wear out over time. When that happens, the joints get loose, and rattle. This video shows you how to install new TRQ sway bar links on your 2011-15 Chevy Cruze.
• Check here for more videos on the 2008-16 Chevy Cruze: www.youtube.co...
This repair was done on a 2013 Chevrolet Cruze LS 1.8L and the process should be similar on the following vehicles:
2011 Chevrolet Cruze
2012 Chevrolet Cruze
2013 Chevrolet Cruze
2014 Chevrolet Cruze
2015 Chevrolet Cruze
Tools you will need:
• 18mm Wrench
• 18mm Socket
• 19mm Socket
• Locking Pliers trq.video/ogi-...
• 3/8 Inch Impact Gun
• T35 Torx Socket
• Ratchet trq.video/oaJc...
• Torque Wrench trq.video/o3c-...
• Rust Penetrant
• Grinder
Subscribe: / @trq
Check out our playlist:
Chevy Cruze 2011-2015 1st Gen: • Chevy Cruze 2011-2015 ...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts
√ *Do it Yourself*
√ *Save Money*

[@michaelstrange1739]

Can you guys do a video on a Chevy Spark sway bar replacement

[@mancatravel220]

Did you also change that coil it looked used during the first part. But brand new at the end.?

[@QDArt-gj6lb]

Yes he did. He did a bunch of parts for different videos

[@theeclipseshow2432]

how do you slide the sway bar in from one end to the other or do i have to uninstall the rack and pinion????? pls

[@dannyzamudio1252]

Does it needs an aligment after replacing sway bars?

[@enriqueze5506]

Yo