Perfect I Have The Same TV Hisence & exactly the same problem and been looking for a video to help me figure out what's the problem and this video did it for me. THANK YOU.
Well donne Engineer Tevz. I seen most of your videos. And I think most model you have repaired. We have these models in my country also. Hisense skyworth myros samsumg etc.... I have a hisense at home but for me it's 80inch. I cross fingers if one day it got a problem. I will able to repair it. I think 🤔 so... The problems of power supply its not difficult to trace. But problems of horizontal and vertical lines and change backlight it will be a problems for me .As Am not well trained enough for these steps. Thanks Master have a bless day. 🙏
when they come on for a little and then back off it normally is something to do with the inverter in the main board or the power supply depending on were the model has the inverter.
I bought a Hisense TV many years ago, and it was on almost 24 hours a day with 0 problems. When it finally died I bought another Hisense TV. This one has no "Power" button (although I keep being told it does) and after being on for a while when it is turned off it will not start-up again without unplugging it for a few minutes first. I have tried many suggested fixes...and nothing works.....
Check the IR sensor, if the logic board is replaced, in some cases the original remote will not function because of the software. Try the universal remote.
same thing happened to my 2019 Vizio M series TV , thats American made piece of shyt brand like usual ...some of stores NOW Costco dont carry Vizio TVS anymore, BUT if u guys buys it From Costco u get 3-5 years warranty on their TVS Free . I just bought Hisnese A65H/55 inch TV for $240 from Costco got 3 years warranty on it...probably gonna f***ked up like this couple of years down the road mother fathers!
I have exactly the same problem with my Hisense TV but when I took the back cover off the capacitors seem fine. Any other suggestions I really need some help!
ciao ho lo stesso tv da riparare ma la retro illuminazione non si vede, quando accendo con una torcia vedo il logo apparire ma poi scompare, vorrei chiederti come posso testare i led senza aprire tutto il televisore ciao
Good morning sir will you please help my problem about my problem....58A7100F HISENCE LED TV.no indicator red light .and not responcing if ill try to turn on the remote..but there is 12v supply to the main board..what should i do sir thanks...
@@tevzTVTevatronics ok sir i will try to check again...but before that i perform connecting a DIY bl driver and the display or picture apear by connecting signal to hdmi .but there is no sound ..i think its because of that the sensor and red light indicator not funtioning.
Me paso lo mismo, incluso recibi una descarga a pesar de que la tele estaba apagada de hace dias. Voy a medir el capacitor pero todo indica que el problema es el mismo que en este video.
Hisense 75U6H is the Worst POS I have ever owned. I have had to do 3 Factory resets. No more casting we tried everything. Run as fast as you can away from Hisense I should of stuck with Samsung not one problem. The Hisense 75" is now useless as is Hisense Tech Support. The TV is only 5 months old and was total garbage since the day it was installed. Hisense? Never Again. It will not allow anyone to get into settings. Remember this post if you are unlucky enough to believe the hype on this Complete POS.
Mine blinks on/off exactly like that...except it takes a few seconds to do it and it blinks on/off about 10 times faster than this. Same if you hold down the reset button.
Perfect I Have The Same TV Hisence & exactly the same problem and been looking for a video to help me figure out what's the problem and this video did it for me. THANK YOU.
Well donne Engineer Tevz.
I seen most of your videos. And I think most model you have repaired. We have these models in my country also. Hisense skyworth myros samsumg etc....
I have a hisense at home but for me it's 80inch. I cross fingers if one day it got a problem. I will able to repair it. I think 🤔 so...
The problems of power supply its not difficult to trace.
But problems of horizontal and vertical lines and change backlight it will be a problems for me .As Am not well trained enough for these steps.
Thanks Master have a bless day. 🙏
Can't believe I fixed it, thanks man, definitely was the problem
Well done demonstration and explanation thanks for sharing fr jennysheart
Thanks for visiting
Well done, keep it the good work
Nice video, it really helped me. thankyou very much.
Good great best job thanks for sharing ❤️👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾🙏
Watching your video.. thanks for sharing idea..
Welcome 😊
when they come on for a little and then back off it normally is something to do with the inverter in the main board or the power supply depending on were the model has the inverter.
Paharang host
Обожаю такие ремонты 😄 Вздутый конденсатор поменял и готово 😄👍 Спасибо! Лайк!
Thanks for the video
My almost new 1.5 year Hisense 58r6e3 just went,no pic or sound just red blinking light,have no idea what it could be
Mine just went too
This tv is trash!!! Life span is short
Same 😮
Hisense is a horrible tv to buy. Very short lifespan.
I bought a Hisense TV many years ago, and it was on almost 24 hours a day with 0 problems. When it finally died I bought another Hisense TV. This one has no "Power" button (although I keep being told it does) and after being on for a while when it is turned off it will not start-up again without unplugging it for a few minutes first. I have tried many suggested fixes...and nothing works.....
they are better than vizio
Their fridges also.
Evidently. Uggg very disappointed.
Thnx
New subscriber master
Thanks for subbing
Newbie is watching master
thanks for watching
Can I use capasitor 100uf 450v?
Original is 82uf 450v
yes
@@tevzTVTevatronics but it not working, what more Can't I do?system same at your video
Is the main board responsible for the remote control also?
Good work, but I have got a Hisense smart TV 58 inch standby flashing 6times not continue to turning on
Thanks
Hi Tevz
I have a problem with hisense tv which does not response for remote control. I replaced logic board in it. What can I do ? THX
Check the IR sensor, if the logic board is replaced, in some cases the original remote will not function because of the software. Try the universal remote.
@@tevzTVTevatronics Hi Tevz
Thank you for your response. I did try universal remote but it didn’t work as well
@@SPIOH1979 Did it work well? Did some keys respond to the tv?
@@tevzTVTevatronics Yes, all buttons works fine just remote doesn’t
same thing happened to my 2019 Vizio M series TV , thats American made piece of shyt brand like usual ...some of stores NOW Costco dont carry Vizio TVS anymore, BUT if u guys buys it From Costco u get 3-5 years warranty on their TVS Free . I just bought Hisnese A65H/55 inch TV for $240 from Costco got 3 years warranty on it...probably gonna f***ked up like this couple of years down the road mother fathers!
Where did you get the extra capacitor? I can’t find them anywhere
From scrap circuit board
Model? Thank bro
Sir anu po ibang brand ng LCD ang pwede pamalit sa HISENSE
I have exactly the same problem with my Hisense TV but when I took the back cover off the capacitors seem fine. Any other suggestions I really need some help!
Hello sir. May I know what model this Hisense TV you repaired? I also have the same problem with my Hisense 55N3000.
Sorry, not noted
This is Smart TV Hisense 40inch..?
Thnks
Mine does exactly same thing but the main capacitor holds 15V with tv turned off and it isn't swollen.
❤❤❤
ciao ho lo stesso tv da riparare ma la retro illuminazione non si vede, quando accendo con una torcia vedo il logo apparire ma poi scompare, vorrei chiederti come posso testare i led senza aprire tutto il televisore ciao
I have the same issue with a rsag7.820.7924/roh model, maybe i can fix it 😯
Fixed, but only work for 2 days, now i have the same issue again.
i can't see any caps on my board that are expanded but i'm getting the same on then off issue.
Good morning sir will you please help my problem about my problem....58A7100F HISENCE LED TV.no indicator red light .and not responcing if ill try to turn on the remote..but there is 12v supply to the main board..what should i do sir thanks...
check 3.3volts standby
@@tevzTVTevatronics ok sir i will try to check again...but before that i perform connecting a DIY bl driver and the display or picture apear by connecting signal to hdmi .but there is no sound ..i think its because of that the sensor and red light indicator not funtioning.
Tengo la misma situación con el mio
Me paso lo mismo, incluso recibi una descarga a pesar de que la tele estaba apagada de hace dias. Voy a medir el capacitor pero todo indica que el problema es el mismo que en este video.
Why's my hisense roku tv model 58r6e3 has a gray screen and no sound and no picture
Ace vid
Do you mean to say, "does not stay on"?
Yes
People who short caps, should Not be doing electronics!!!!
Traducir en español
😄😄😄😄👍👋
Hisense 75U6H is the Worst POS I have ever owned. I have had to do 3 Factory resets. No more casting we tried everything. Run as fast as you can away from Hisense I should of stuck with Samsung not one problem. The Hisense 75" is now useless as is Hisense Tech Support. The TV is only 5 months old and was total garbage since the day it was installed. Hisense? Never Again. It will not allow anyone to get into settings. Remember this post if you are unlucky enough to believe the hype on this Complete POS.
i have tried it but did not work
Mine blinks on/off exactly like that...except it takes a few seconds to do it and it blinks on/off about 10 times faster than this. Same if you hold down the reset button.
Also a capacitor problem.
Agreed Chinese junk
Chinese spy junk TVs. Expect to get maybe 2 years out of these shit tvs. If it doesn't steal all your information
These TVs are garbage. I've got one we've maybe used for 100 hours or so and it's dead in the water.