Check Engine Light On. P06DD Tips to do first.
HTML-код
- Опубликовано: 5 фев 2023
- Vido here: • Here's how 1 car can r...
I work at Brothers Motors in Snellville Ga if you want a estimate on repairs. Please note we work on appointments only. So look us up at www.BrothersMotorsLLC.com and set up an appointment. Please NOTE: The bulk of my time in the comment section is spent on comments and questions from SUBSCRIBERS, If you not subscribed, or leave off the question asking are you subscribed, I have to get to those questions after im done with all the subscribers questions. Please understand, this very important. Also guys/gals, if you need to get in contact with me ASAP concerning info or help, please use the CashApp $20 donate feature to $JohnnieRayThomas. Simply donate and a message will come to my phone and I can get in contact with you ASAP, thanks. Or simply leave your comment or question in the comment section. Thanks for viewing an Online Mechanic Tips video with JT the Car Guy. As always ask any questions you may have but please consider subscribing to the channel because I speak about a lot more. Please use the donate links to my Paypal or my Cash App if you wish to donate and help support the Channel. This also sends a direct message to my cell phone alerting me of assistant needed quickly, which means I can get back to you quickly. Thanks in advance. If this video in any way helped you save time and money, please consider donating.
Paypal Donate Link here: www.paypal.me/OnlineMechanicT...
Cash App here: $JohnnieRayThomas
#jtthecarguy
#shorts 
Авто/Мото
Video here: ruclips.net/video/o4Go80S_XT8/видео.html
We're all guilty of it, but you're actually supposed to disconnect the negative terminal rather than the positive.. It's all about things ability to short thru ground...
Also main and rod bearings out of spec will cause low oil pressure
Could you link the full videos in a pinned comment? I would love to watch them .. but can never seem to find the one I am looking for … I watch a lot of you videos but sometimes your shorts peek my interest…
That's why I have my oil changed 3k miles or every 4 to 5 months on my 14 grand caravan. Oil is cheaper than an engine
Thanks bro
Alright get this. I just had the oil changed on mine and they used the wrong oil filter, I then got the P06DD code come up and went back. I watched them pull the incorrect filter out of the car and replace it with the right one. I still can't get rid of the code though and the car is in limp mode because of it. Help me out please and thank you.
TYRONE, GOOD RULE OF THUMB REMOVING BATTERY CABLE, WITH TODAY'S COMPUTERIZED VEHICLES LIKE THE REMOTE STARTS. IF A STRAY SIGNAL TRIGGERS THE AUTOSTART AND YOU'RE WORKING ON THE PULLEYS. YOU CAN GET YOUR FINGERS CHOPPED OFF.
Another low maintenance vehicle to work on. Take Care JT
I have been having this off and on with my 2014 Ram 1500, seems like my filter seal was bad causing it to piss out oil, topped off the oil, replaced the seal, and it did do it a couple time after but I checked, seen oil down the manifold from the filter, took the air gun blasted a bunch of shit out and so far its been okay
I only ever own worn out, ancient engines (some of my fleet is from the 1950s) and I have never known an oil pump to fail. The engine will run again, but its life is going to be short...they destroyed it though neglect.
rip to u in the future lol, I've definitely had that happen before lol
I had the same code after I replaced a transmission 62te on a 2016 t&c I swapped the oil sensor it didn’t go away so I got a update and it’s gone but second i left dealer now I have po430
In 2010 and older never had these issues
Thats a cat code. Check your o2 sensor wiring & the catalytic converter
@@Flatlandproductionz you are correct checked everything and it’s a glitch in the software. When it’s warm out it doesn’t come on. Weird one I’ve worked on thousands of these vans and the one I own has this issue lol my luck
i have the same van and on the inside of oil filter cap one of the three tabs that locks the oil filter broke, will this cause an issue? im thinking of replacing the cap
Would the wrong oil filter cause you to lose oil? I got an oil change a few months ago, now I got the P06DD and my oil was VERY low.
Same issue. Oil was low. Put oil in and runs smooth
Did the sensor go off after the oil change?
Then there's a leak. Most likely the oil filter cooler
seen way blacker oil than that although it probably needs 2 b changed.
What about a po6da code?
I have a 2014 Jeep grand Cherokee limited with a penstar v6, I’m getting the p06dd code and traction control light coming on when I’m usually on the highway, I’ve replaced the oil cooler with the upgraded metal one, changed oil, new filter and it’s still happening. Any tips?
Curious, how many miles on this Jeep? Also are you subscribed to the channel?
If that thing needs a new oil pump, it needs a new engine. debris has circulated throughout and taken out the oil pump..and bearings too.
Not necessarily on the pentastar. It has a pump that adjusts its size via a solenoid on the pump the solenoid is what fails.