Yes, it was. I remember I noticed after I recorded. I used a part of a bicycle brake part as a spacer. It's hard for me to describe. It's the metal sleeve usually on the end of the plastic part of a brake cable. I put it in between the throttle cable end and the throttle slide cap of the carb. It's basically inside the rubber sleeve thats attached to the cap.. Just make sure it's going to pull out the slack and not get stuck in any way, causing the throttle to not close all the way. I hope I'm not confusing you, too much. This has been working for me. Hope this helps you figure it out. Thank you for watching.
May want to consider getting the offset intake manifold. Its not necessary obviously, but its way bigger to match the size of the carburetor and you'd pick up some decent power/torque as well
Would there be enough room? These atvs really have some limited space between the engine and frame. 1 more mod I was thinking is a fresh air tube/snorkel shooting into the airbox. 🤷🏻♂️ I can say the bike has been its most reliable with this setup. Thanks for watching, my friend.
Surprisingly, very well. The Nibbi carb is doing great also. Honestly, this atv is running and riding better than new. It took some time and work to iron out its flaws but has since earned my trust. Thank you for reaching out.
@@NOURSEPOWER I just picked up one of those ATV's for free, but it needs work. Looks like new wiring, throttle and brake controls, and fuel system for sure.
Thank you asking. I didn't realize I never added them. The parts are now in the description. You will need to copy and paste. I'm currently unable to add links in my descriptions. I think it's bc the channel isn't big enough. Thank you for watching.
😆 thanks, my friend. So far, so good on that purchase. This is a bike, I just don't want to put much money into it, but I have worked hard to get it safe and reliable. Thank you for watching.
I tuned the carb lean- pilot, needle & main to counter the homemade air box. Still slightly on the fat side with the provided jets, but runs better than previous setup. My favorite part is the bike starts right up. That was always my nightmare from out the box with this thing. If I come up with something else I'll make an update. Thanks for watching.
Just tried this. My throttle cable is too long. Did you have to change yours? Ran out of adjustment
Yes, it was. I remember I noticed after I recorded. I used a part of a bicycle brake part as a spacer. It's hard for me to describe. It's the metal sleeve usually on the end of the plastic part of a brake cable. I put it in between the throttle cable end and the throttle slide cap of the carb. It's basically inside the rubber sleeve thats attached to the cap.. Just make sure it's going to pull out the slack and not get stuck in any way, causing the throttle to not close all the way. I hope I'm not confusing you, too much. This has been working for me. Hope this helps you figure it out. Thank you for watching.
Very informative especially the jet sizing. Subbed.
I'm happy to help. Thank you for watching and subscribing to the channel.
Loved the donuts at the end.
Kid loves his donuts. Especially with sprinkles! 😆
May want to consider getting the offset intake manifold. Its not necessary obviously, but its way bigger to match the size of the carburetor and you'd pick up some decent power/torque as well
Would there be enough room? These atvs really have some limited space between the engine and frame.
1 more mod I was thinking is a fresh air tube/snorkel shooting into the airbox. 🤷🏻♂️ I can say the bike has been its most reliable with this setup. Thanks for watching, my friend.
do you have a link to jet sizing kit you used?
I'm using the jets that came with the Nibbi carb.
how's the air box holding up?
Surprisingly, very well. The Nibbi carb is doing great also. Honestly, this atv is running and riding better than new. It took some time and work to iron out its flaws but has since earned my trust. Thank you for reaching out.
@@NOURSEPOWER I just picked up one of those ATV's for free, but it needs work. Looks like new wiring, throttle and brake controls, and fuel system for sure.
@brich2929 awesome. Plenty of good websites for parts outside of ebay and amazon. One i like is Vmcchineseparts.com
Got a link to the spacer?
Thank you asking. I didn't realize I never added them. The parts are now in the description. You will need to copy and paste. I'm currently unable to add links in my descriptions. I think it's bc the channel isn't big enough. Thank you for watching.
They way you’re saying nibbi the first time is the right way 😂😂
😆 thanks, my friend. So far, so good on that purchase. This is a bike, I just don't want to put much money into it, but I have worked hard to get it safe and reliable. Thank you for watching.
I did this to mine and it’s dumping to much gas ?
I tuned the carb lean- pilot, needle & main to counter the homemade air box. Still slightly on the fat side with the provided jets, but runs better than previous setup. My favorite part is the bike starts right up. That was always my nightmare from out the box with this thing. If I come up with something else I'll make an update. Thanks for watching.
Don't worry I don't need that Tupperware.
I don't know what you're talking about. 😬