The problem with my laptop is that it doesn't display the hp logo or the windows logo. It is always black unless I press the esc key then the bios settings pop up. Please help. I need to know what's wrong with my laptop.
It's utterly ludicrous that they removed F8 as an option at bootup, also that you can't do control-alt-delete instead of risking damaging the hard drive by powering off in this way. It seems like Windows 10, all remaining sanity went out the window at Microsoft.
@@UltimateDIY I changed the resolution of my pc from 1080p to 1440p, by mistake and my monitor and showed that resolution not supported and tried and then i got into troubleshoot - startup settings and then i enabled low - resolution video mode, and now i am stuck how should i set back to normal.. that what happens
Well...you asked how to get out, so the assumption is that you are in low res. Check if the driver is installed and what is the maximum resolution it will allow you to set.
This video teaches you to enter VGA mode. That means you have a video driver related problem, which in turn means that you can't use the standard method. So, sadly, what you sent there is not valid for this situation. Take a look starting from 3:33 to the end on the video and you will understand what I mean.
I followed the first steps which are Turn off the computer 3 times which gives me the advanced options, from there follow his intructions until you have the normal screen after you enter your pin. Right click then select the display settings and set the correct resolution. It worked for me.
▬▬▬▬▬▬▬▬▬ஜ۩۞۩ஜ▬▬▬▬▬▬▬▬▬
T H A N K Y O U F O R W A T C H I N G !
P L E A S E L I K E A N D S U B S C R I B E !
▬▬▬▬▬▬▬▬▬ஜ۩۞۩ஜ▬▬▬▬▬▬▬▬▬
first and I will not subscribe
Thank you for subscribing!
I WAS LOOKING FOR THIS 1DAY TY SM BRO!❤🎉
Welcome!
The problem with my laptop is that it doesn't display the hp logo or the windows logo. It is always black unless I press the esc key then the bios settings pop up. Please help. I need to know what's wrong with my laptop.
You can go to display settings, advanced display settings, settings for your display driver, list all models, 640 x 480
That ia not the point. The point is to start Windows without loading the video drivers.
This was the point for me thank you this helped more than the video
Omg thank you so much man, you just saved me, I don't know how to thank you man
Welcome!
You just helped me. Thank you. I did the first steps but when the screen is normal I just right click and change the resolution settings.
Welcome!
It's utterly ludicrous that they removed F8 as an option at bootup, also that you can't do control-alt-delete instead of risking damaging the hard drive by powering off in this way. It seems like Windows 10, all remaining sanity went out the window at Microsoft.
They traded all of that in favor of faster booting.
Useful! What a pain has basic diag become...
btw how do u get high resolution video mode back again tho
This is valid for only one power on. After a restart il will get back to the old resolution if you do not set anything yourself.
@@UltimateDIY what does that means? cuz i cant get back the high resolution mode no matter how many times i restarted my pc
Maybe you need to reinstall your video driver.
@@UltimateDIY ok
Now, how i can disable it?
It's definive?
I need a vga 640x480p to use on a old arcade stuff.
Thanks
No, it will change back after restarting Windows.
Instead type 'bcdedit /set vga yes'
Thanks.
But since..I have my hyperspin vga pc in 31 khz and a rgb jamma with a raspberry pi 5.
Thanks bruh you helped me a lot love from Pakistan
Welcome!
Thank you so much brother 💙
Welcome!
Thank you very much for this video. It really helped.
Welcome!
it doesn t happen anything when i press 3... what do i do?
Why doesn't mine go to automatic repair? I just turn it off and on more than 3 times any help? I have a dell monitor
Impossible to be sure, but my guess is that you are turning it off at the wrong moment.
Thanks a lot brother ❤❤❤❤❤❤
It works
Welcome 👍
bro plz reply after all process my pc started but then suddenly showing that problem again
Bro I accidentally did this and it messed up the display resolution
Just give the pc a restart and if needed reinstall the video driver.
Bruh I'm taping power button but not happening..
Thanks So Much It Worked! 7)
Welcome!
I have enabled now i want to disable it how should i do it??
Reboot the computer and it's disabled. This is one time only. If it's more than one time, it was not enabled by the method shown in the video.
@@UltimateDIY I can't disable it after restarting the pc either how should i do it now help me
Again. The method from the video only works once. If you want me to help, please explain how you got into the situation of low resolution mode.
@@UltimateDIY I changed the resolution of my pc from 1080p to 1440p, by mistake and my monitor and showed that resolution not supported and tried and then i got into troubleshoot - startup settings and then i enabled low - resolution video mode, and now i am stuck how should i set back to normal.. that what happens
Ok, in this case I would uninstall the video driver and reboot the computer. Then reinstall it and you should be fine.
Holy shit hahaha thank you much for this. Been troubleshooting for a week now
Welcome!
please tell me how to out of this mode
why you should reinvent the wheel when you could simply use F8....
In Windows 10? Nu merge.
Tq very much bro....you help me...
Welcome!
Wow bro you helped me out. Thx
Welcome!
don't power cycle, just hold shift and restart while in the computer.
That is if you can actually see your screen to restart it.
Power cycle is way more rough, but works for any scenario.
@@UltimateDIY if you can't see your screen, what's the point of going into VGA mode?
Because maybe your graphics driver set a resolution that the monitor can't display. It happens to a lot of people.
@@UltimateDIY you mean if the resolution is set too high? to the point where stuff is off screen?
No. Some monitors when you go over the maximum resolution or refresh rate will just display a message "resolution not supported" over a black screen.
Than you so much bro....very very thanx .....
Welcome!
How to exit from low resolution mode?
Normally you just restart the pc.
If you still have low resolution mode, maybe your video drivers are not installed.
@@UltimateDIY how do i know if i am in low resolution mode? I have an old pc with g41 graphics integrated on motherboard.
Well...you asked how to get out, so the assumption is that you are in low res. Check if the driver is installed and what is the maximum resolution it will allow you to set.
@@sparshsingh7543 Go to device manager click display Adapters and then right click the GPU. You will see the options listed
Its working thak you 🙂
Welcome!
That's not really the right way to do it...
Can you please give us the right way?
support.microsoft.com/en-us/help/12376/windows-10-start-your-pc-in-safe-mode
This video teaches you to enter VGA mode. That means you have a video driver related problem, which in turn means that you can't use the standard method. So, sadly, what you sent there is not valid for this situation. Take a look starting from 3:33 to the end on the video and you will understand what I mean.
How do i disable this
Josh Gibson what exactly?
My pc was stuck at the cannot display
thx bro 😭😭❤❤❤
Welcome!
Thank bro, you just help me)
Welcome! :)
I didn’t your for me still say the current input is not supported by the monitor what els can I do pls help me
Did you try the team viewer method?
I followed the first steps which are
Turn off the computer 3 times which gives me the advanced options, from there follow his intructions until you have the normal screen after you enter your pin. Right click then select the display settings and set the correct resolution. It worked for me.
THANK YOU Comrade, you saved me
Welcome! :)
I also can see anything at all
Tell me how to disable it
Don't know, because there are a ton of reasons whay it enables itself. The main one is a missing/bad driver.
320x200 be like
🤭
Holly fucking shit ur a fucking legend u earned a sub dude
I love u
After intsalling a new Window to PC the quality of display is like this what should I do to enhance it like earlier???
Install the video driver.
@@UltimateDIY it has nvidia geforce 210 should I also download Nvidia driver?
Yes.
@@UltimateDIY can u tell me which nvidias driver?
Thnaks bro allah yahdik❤
Welcome!
Ty bro :D
Welcome!
@@UltimateDIY does this work for windows 7
@@Layth-n3n no. For Windows 7 you need to press F8 at startup and then the number coresponding to VGA mode from the list on the screen.
@@UltimateDIY can you send me link?
Can I do this just to achieve a higher frame rate in games
No. Most games will not even start in this mode.
Ultimate DIY why won’t my game start do u know what option will make my game start pls help fast
The vast majority of games do not work in safe mode or vga mode
Ultimate DIY do u know what option on startup setting will allow games to run pls (btw thanks for replying)
Only normal startup will run games.
Yo ndang bejat hardisk e bos
English please.
Thanks bro 😂
Welcome!