How To Repair A Pothole - MeonUK
HTML-код
- Опубликовано: 16 май 2018
- In this short video, Meon walk you through the best and most effective way of repair a pothole and how to make that reinstatement last.
The best way to repair a pothole is to...
1 - Cut and break out the edges of the pothole
2 - Remove debris and loose material from the hole
3 - Edge seal the sides of the hole using Bituseal (shopping.meonuk.com/bituseal-t...) or EdgeFast
4 - Tip the PatchMaster pothole repair material into the hole and evenly spread out.
5 - Ensure material is approx 25mm prod of the existing surface.
6 - Use a compaction plate or punner to compact the asphalt
7 - Overband the edges using ThermaBand preformed thermoplastic overbanding.
Discover the most effective way of repairing a pothole.
Products used:
BituSeal edge sealer - shopping.meonuk.com/bituseal-t...
PatchMaster Pothole filler (HAPAS option available) - shopping.meonuk.com/search?key...
ThermaBand Plus thermoplastic overbanding - shopping.meonuk.com/magma-ther...
Meon also offer a Pothole repair kit - shopping.meonuk.com/MAGMA-Poth...
Correct repair , square edges 😎
Amazing that this is 5 years old
The council hires bottom of the the pool road fixers.
They don't square off the hole...heck they don't even clean out the loose stuff or dry the water up.
Oh and they just tread on it to compress it and half stick the tape on top which falls off in days then the car tyres pull up what they did and the hole is worse than before.
Yay technology
Thank you AAAAAAAAAAAAAA++++++++++++++++ very clear fast and to the point
I always square off the edges but iv never used the felt strips, that's a new one on me.
cool
Die erste Füllung sah gut aus... Die zweite Lage dagegen ist viel zu hoch! Und das Toc-Band gehört in die Fuge und nicht oben drauf.
Danke für den Kommentar. Wenn eine zweite Schicht benötigt wird, empfehlen wir, diese leicht anzuheben, da sich das Material mit der Zeit stärker verdichtet. Das ThermaBand dichtet die Fuge ab und verhindert, dass Wasser eindringt, das gefrieren und das Schlagloch wieder formen kann. Ein großes Problem in England.
Thanks for the comment. When a second layer is needed, we do recommend to lay it slightly high as the material will compact more over time. The ThermaBand seals the joint and stops water getting in, which can freeze and make the pothole start to form again. A big problem in England.
How does this address the fact a pothole is usually the result of a collapsed foundation?
It does not but then again that is not true.
@@lenrichardson7349 I'd disagree. Usually potholes are resistant to filling due to freeze thaw damage to the base. You fill the hole, and it just reopens because the base collapses into the subsoil. Hence why you keep filling them and they keep reopening. Material just gets pushed through the hole in the base (foundation)
Shame the council don't use this method....when they "repair" them they looked better before! every pothole they repair looks like they used a knife and fork.
😂