Need to hold power button when it's on and keep holding a few seconds to enter pairing mode manually. Then you can connect to another device than your 1st.
@@Janna_Da_Fish I came here to find this information and had to fiddle to find-it, since everyone trying to help like this guy just show initial pairing, which is just easy and not so informative (to me), I'm glad this tidbit was useful to you :)
Can you give me a hand, when I press the power button when it’s on it just turns off. Also if I hold the power button on after I’ve turned them on nothing happens
@@pavanpal3504 you need to have the headphones OFF first, and then press+hold the power button. Hold even after it’s powered on and you will get the blue constantly blinking light
Thank you for making this video which enabled me to successfully pairing my JBL TUNE600 headphone to my iPod Nano, after much time spent but not finding the solution. My iPOD initially did discover the JBL TUNE600 headphone but would not connect to it, despite that I turned on/off the bluetooth on the iPOD, even after hard rest of the iPOD (sleep/home button, together). Afterwards, the JBL device never showed up on iPOD any longer. Your tip on pressing the volume up (+) down (-) buttons on the JBL together at the same time forced it kept sending signals to iPOD. The JBL SHOWED up & I was able to connect.
My JBL600btnc never worked via Bluetooth. And volume and play/pause buttons seem not working. Customer support can't do anything for me because I purchased this product overseas and the warranty is not valid in my country. I refuse to think that the headphones arrived already broken, three different function are not working and it seem quite unusual to me. I can't even reset them because of the non-working buttons. Do you think is there something I could do or do I have to surrender to the fact that these headphones are useless?
Next time, when/if they stop working, buy the exact same headphones in your own country and use that warranty on your stuff bought overseas, just make sure its the same version/revision of the product. Sell one of the headphones after your repair is done, or keep it. IDC
Hi all, I would first thank you for sharing this video and I would like share my experience in hope it will help others. I purchased this headphones and after I fully charged it, I wanted to try by pairing it to my phone but what happened that when I hold the power button for few seconds the blue light blinks and when I release the power button the white light turns on but the blue one stop blinking and turned off at this point when I try to discover it on the phone or laptop I don't see it being discovered, I tried this on my phone and laptop many times with no luck, BTW, the JBL documents and supports are so poor, nothing was helpful from their website. I then wanted to reset it as some people suggested by holding + and - at the same time for few seconds say 20 or 20 seconds but again didn't help. Lastly, what I did and this was the trick that helped, I connected the audio cable to both phone and headphone and tried the reset steps (+ button and - button and power button at the same time while the headphone power light is turned on) for few seconds then the other light that was blue was blinking but in white not blue and then after this I unplugged the audio cable then was able to get it seen on the phone and the laptop and finally get it to work. Phew, was so happy to discover this and wanted to share it with others
My problem is that my JBL headphones are not connecting. They charged for several hours, my Bluetooth is on and the headphones are surely on. I even pressed forget device and it didn’t work. It just turns on and doesn’t connect, is there a way to “turn on” pairing mode on the headphones???
Hey man! So I last night before I went to sleep I put my headphones on the charger and woke up the next day but my charging light(red light) won't turn off! Can you help me with this?
Hi, sorry for the question, do you know if by any chance there is a way, when I connect the headphones, to change the color of the light from blue to other colors?
At first, it paired with my computer just fine. Now, it rarely finds it and when it does it does not work as audio. I think, the rare times it does pair, it thinks my headphones are a microphone. Getting buyers remorse BIGTIME
The more I mess with it the more I realize that the headset works fine with the computer. It's the Cakewalk app that isn't properly working with the headset
I have a question. Today, when i turn my headset on, the blue light was blinking and the white light did not turn on, as it generally does when the set is turned on. I could not pair my device with the headphone and the blue light blinking wouldn't stop, even after pressing the power button . Do you have any idea as to when this thing happens? And why?
@@anonym7288 get to a nearby JBL service centre and opt for replacement, if you have not exceeded the warranty period. I got a replacement and now it is fine.
I got these headphones 2 months ago. Until yesterday, they paired with my MacBook Air. Sounded great, and the ANC was acceptable. Yesterday they failed to pair, today they will not pair, and nothing works to get them to pair. I was hoping your video would have new info, but unfortunately it's the regular method. I need these headphones because I'm in a very noisy location, and they don't work. BIG waste of money.
Hi I tried pairing it but to no avail. I had to press and hold the power button to have bluetooth activated. It didn't pair the first time. What do I need to do?
I just bought these headphones and my laptop is refusing to connect with them . When I switch the headphones on and I try get my laptop to try to detect and add the heaphones, it cannot scan them. I've been trying the whole day, please someone help me ASAP!!!!!
I have tried everything to find my headphones, but no matter what, they just wouldn't appear on my phone. I used to be able to, but disconnected it from my phone to connect it to my computer. Once I disconnected it from the laptop, it just disappeared. I can no longer find it, and I am unable to connect to it. HELP
I made a mistake while using them to go to the gym and i believe that the sweat got inside of them and now the sound is horrible. I tried cleaning them already. Any advise? 😔😪
Oh no, I hope you are able to fix them ☹️ I opened up the headphones in this video: ruclips.net/video/Cgms7ZzPA78/видео.html But this won’t include the plastic case that holds the actual transducer. With some luck you’ll be able to take that apart and clean the inside with some rubbing alcohol. I am not sure how to open that part.
Oh no, I hope you are able to fix them ☹️ I opened up the headphones in this video: ruclips.net/video/Cgms7ZzPA78/видео.html But this won’t include the plastic case that holds the actual transducer. With some luck you’ll be able to take that apart and clean the inside with some rubbing alcohol. I am not sure how to open that part.
Can anyone pair multiple devices with these headsets. My previous Plantronics manged 2 devices with ease and I am struggling to get these to do the same.
Ronele Coetzee you can! Just make sure the device your headset is already connected to cannot auto connect and then it won’t show up on the device that hasnt paired yet. I have done this several times.
Worst headphones I've ever had. The Bluetooth connection is just too bad. You move your head and the connection is lagging a lot. Sound is poor, too. I prefer the Tune500 a 10000 times
Thank you. Every time I don't use my headphones for a while I forget. This is a great video. Props. Thanks for making it. So helpful.
Need to hold power button when it's on and keep holding a few seconds to enter pairing mode manually. Then you can connect to another device than your 1st.
This took me so long to figure out, thank you
@@Janna_Da_Fish I came here to find this information and had to fiddle to find-it, since everyone trying to help like this guy just show initial pairing, which is just easy and not so informative (to me), I'm glad this tidbit was useful to you :)
Can you give me a hand, when I press the power button when it’s on it just turns off. Also if I hold the power button on after I’ve turned them on nothing happens
Thanks mate ! Really helpful
@@pavanpal3504 you need to have the headphones OFF first, and then press+hold the power button. Hold even after it’s powered on and you will get the blue constantly blinking light
Thank you for making this video which enabled me to successfully pairing my JBL TUNE600 headphone to my iPod Nano, after much time spent but not finding the solution. My iPOD initially did discover the JBL TUNE600 headphone but would not connect to it, despite that I turned on/off the bluetooth on the iPOD, even after hard rest of the iPOD (sleep/home button, together). Afterwards, the JBL device never showed up on iPOD any longer. Your tip on pressing the volume up (+) down (-) buttons on the JBL together at the same time forced it kept sending signals to iPOD. The JBL SHOWED up & I was able to connect.
Thank you. 😂 yours was the simplest way. Much needed
Is the noise cancelling good? I heard some people saying it works nicely, but it’s good to see other opinions.
No it doesn't cancel noise.
Linda Van I bought it two months ago and it does a pretty decent job at cancelling the noise. Good choice.
Best instructional. Easy. Straight to the point.
Thank u so much man I was very confused that there wasn’t a pairing button so thanks
Thanks man, great help!
the white light is on and the blue light is flashing, but still doesn’t show up on my phone’s Bluetooth
Thanks for making a useful video
My JBL600btnc never worked via Bluetooth. And volume and play/pause buttons seem not working. Customer support can't do anything for me because I purchased this product overseas and the warranty is not valid in my country. I refuse to think that the headphones arrived already broken, three different function are not working and it seem quite unusual to me. I can't even reset them because of the non-working buttons. Do you think is there something I could do or do I have to surrender to the fact that these headphones are useless?
Lol
Next time, when/if they stop working, buy the exact same headphones in your own country and use that warranty on your stuff bought overseas, just make sure its the same version/revision of the product. Sell one of the headphones after your repair is done, or keep it. IDC
Great video on how to pair. If I want to use headphones on airplane such as America airlines, how do I connect and listen to movies?
Hello, on the airplane the headphones usually still get connected by the auxiliary cable that comes with the headphones.
Hi all,
I would first thank you for sharing this video and I would like share my experience in hope it will help others. I purchased this headphones and after I fully charged it, I wanted to try by pairing it to my phone but what happened that when I hold the power button for few seconds the blue light blinks and when I release the power button the white light turns on but the blue one stop blinking and turned off at this point when I try to discover it on the phone or laptop I don't see it being discovered, I tried this on my phone and laptop many times with no luck, BTW, the JBL documents and supports are so poor, nothing was helpful from their website. I then wanted to reset it as some people suggested by holding + and - at the same time for few seconds say 20 or 20 seconds but again didn't help. Lastly, what I did and this was the trick that helped, I connected the audio cable to both phone and headphone and tried the reset steps (+ button and - button and power button at the same time while the headphone power light is turned on) for few seconds then the other light that was blue was blinking but in white not blue and then after this I unplugged the audio cable then was able to get it seen on the phone and the laptop and finally get it to work. Phew, was so happy to discover this and wanted to share it with others
Bro I love u than u soo much I can listen to my phub now
Works for other model jbl headphones also.
Very very thank for your guidance. Good
My problem is that my JBL headphones are not connecting. They charged for several hours, my Bluetooth is on and the headphones are surely on. I even pressed forget device and it didn’t work. It just turns on and doesn’t connect, is there a way to “turn on” pairing mode on the headphones???
Hey man! So I last night before I went to sleep I put my headphones on the charger and woke up the next day but my charging light(red light) won't turn off! Can you help me with this?
This is the video I was looking for .....ty!!
Got it done within seconds
Thx my work again
thanks for your videos. the quick start guide included in purchase does not provide enough info for me.
Hi, sorry for the question, do you know if by any chance there is a way, when I connect the headphones, to change the color of the light from blue to other colors?
Hi, the LEDs inside can only illuminate in their specific color. They would have to be replaced in order to change it.
@@MegaSafetyFirst thank u very much!
You are incredible
It was very helpful
At first, it paired with my computer just fine. Now, it rarely finds it and when it does it does not work as audio. I think, the rare times it does pair, it thinks my headphones are a microphone. Getting buyers remorse BIGTIME
The more I mess with it the more I realize that the headset works fine with the computer. It's the Cakewalk app that isn't properly working with the headset
Thanks this helped!
Thank you 🙏
I’m having this problem recently my jbl headphones don’t appear on the available devices list 😢 what can I do please and thank you
I have a question. Today, when i turn my headset on, the blue light was blinking and the white light did not turn on, as it generally does when the set is turned on. I could not pair my device with the headphone and the blue light blinking wouldn't stop, even after pressing the power button . Do you have any idea as to when this thing happens? And why?
Press the button off for 30 seconds,its because of charging it more than it needs
@@claudiaextremera7804 is still blinking, tried each of the buttens 30 seccond, bot at the same time 30 seconods, but its not working : /
@@anonym7288 get to a nearby JBL service centre and opt for replacement, if you have not exceeded the warranty period. I got a replacement and now it is fine.
When i turn the headphones on there is a white light but the blue light is not blinking and i can not connect them.
Samuel Beyeler dame did u ever gone a way to connect it?
Thanks 😊
Awesome content thanks 🙏🏻
I got these headphones 2 months ago. Until yesterday, they paired with my MacBook Air. Sounded great, and the ANC was acceptable. Yesterday they failed to pair, today they will not pair, and nothing works to get them to pair. I was hoping your video would have new info, but unfortunately it's the regular method. I need these headphones because I'm in a very noisy location, and they don't work. BIG waste of money.
Thank you
Hi I tried pairing it but to no avail. I had to press and hold the power button to have bluetooth activated. It didn't pair the first time. What do I need to do?
I just bought these headphones and my laptop is refusing to connect with them . When I switch the headphones on and I try get my laptop to try to detect and add the heaphones, it cannot scan them. I've been trying the whole day, please someone help me ASAP!!!!!
Make sure to turn off your bluetooth on your phone. I did that and it was able to connect to my laptop.
@@robin1016 Yeah man I figured out that last week.😂😂😂 Phew😪 It's all good now.💯 Thanks anyways 🙏🙏🙏
@@sambanelly4219 That's good to hear man🙏💯
Hi so my headset lights are just blinking white and it doesn't connect to my phone, is there a problem with my headset???
My dad tested it and it thought he was using it lol
Brother I have same but when I turn it on it connects but automatically turns off after a few minutes please help😔
Thanks this helped me
Thanks
Yes with iphone I had no problem at all, but they still don’t work on my iPad Air!
Can anybody tell me how to reset these headphones? It stopped Turning on all of a sudden
I have tried everything to find my headphones, but no matter what, they just wouldn't appear on my phone. I used to be able to, but disconnected it from my phone to connect it to my computer. Once I disconnected it from the laptop, it just disappeared. I can no longer find it, and I am unable to connect to it. HELP
thankyou my brudda
I love these
I made a mistake while using them to go to the gym and i believe that the sweat got inside of them and now the sound is horrible. I tried cleaning them already. Any advise? 😔😪
Oh no, I hope you are able to fix them ☹️
I opened up the headphones in this video: ruclips.net/video/Cgms7ZzPA78/видео.html
But this won’t include the plastic case that holds the actual transducer. With some luck you’ll be able to take that apart and clean the inside with some rubbing alcohol. I am not sure how to open that part.
Oh no, I hope you are able to fix them ☹️
I opened up the headphones in this video: ruclips.net/video/Cgms7ZzPA78/видео.html
But this won’t include the plastic case that holds the actual transducer. With some luck you’ll be able to take that apart and clean the inside with some rubbing alcohol. I am not sure how to open that part.
@@MegaSafetyFirst Thank you. It worked 😊
Bluetooth connection Interference in Headphones JBLtune 600btnc.
Today I buy it.
How can I solve the issue. I think it's device problem
It doesn't work
How do I reset or unpair it????? PLEASE HELP D:
.... just turn bluetooth off
Keep Hold the power button for about 5secs when turning them on
Keep Hold the power button for about 5secs when turning them on
@@nitrolewis tks! :)
This video was helpful give a like to it
Very useful
Thank you so much
Can anyone pair multiple devices with these headsets. My previous Plantronics manged 2 devices with ease and I am struggling to get these to do the same.
Ronele Coetzee you can! Just make sure the device your headset is already connected to cannot auto connect and then it won’t show up on the device that hasnt paired yet. I have done this several times.
can this device pair with multiple device at the same time?
If I remember right then it does not.
💙💙💙💙💞
My headphones are not getting connected 🥺🥺
how do u on the noise cancellation
When i turn the headphones on there is a white light but the blue light is not blinking and i can not connect them.
I have the same problem, did you fix it?
Pascal Cooper yeah but this was 2 months ago i dont know how i did it sorry bro
Kewl. Thanks
Thank
can it connect to 2 phones at the same time?
If I remember right then it was not possible with these headphones.
Doesn’t show up in pairing mode it’s like my phone can’t see it.
How long to recharge
How to reset it?
Hi I need help I just buy a jbl tune 600bntc but the prob how to connect to one another pls help me
I want both is having a music 🎧
Pls thanks so much🙏🏻
Pls help me my headphones not pairing with Bluetooth problems
Plug it in if its not working after doing this and after plugging it inntake the plug out and try again
Thanks m8
It doesn’t work for me instead it connects to my ipad and i can’t get it to connect on my phone
🙏🏽❤️
How Do I Play And Pause Music
I don't have the buton in my headphones
did not work, must be a defective headset. no pairing device seen on my phone.
I can’t connect it to the app
i did it before but it didn't work so thanks
I fee dumb for not knowing but thank you
Worst headphones I've ever had. The Bluetooth connection is just too bad. You move your head and the connection is lagging a lot. Sound is poor, too. I prefer the Tune500 a 10000 times
hiw to pair an unpaired jbl in snart phone
Did you watch the video? It is explained there.
@@MegaSafetyFirst i did and i found it..
thanks alotz...
it really help me...
So good and...So uncomfortable. I am wearing them upside down for now so my ears won't hurt.
it doesnt work but nice video!
My iPhone can’t find them for some reason stupid
You sound like arnald lol
ba
Hi, a few past days it does a sound just after I turn it on. It's like a notification sound, what it means?
This would be the headphones turning on and pairing to your device have other JBL products that have the same noise
Thanks!
Thanks
Teşekkürler
How to reset it??
Did you know how?
This video shows how:
ruclips.net/video/zd8W0ZyScb0/видео.html
Thank you ❤
thank you!
Thank you 🙏🏾