Due to OverLoad Excavator Wheel Hub was Broke Into Pieces, How Amazingly Repaired By Expert Mechanic
HTML-код
- Опубликовано: 12 май 2024
- Due to OverLoad Excavator Wheel Hub was Broke Into Pieces, How Amazingly Repaired By Expert Mechanic
Expert mechanic tackles the challenging task of repairing a broken excavator wheel hub. After an intense overload incident the wheel hub broke into pieces, our skilled mechanic uses a combination of precise lathe machining and expert welding techniques to bring it back to life. This video showcases the step-by-step process of how the damaged hub is meticulously restored, demonstrating both the power of engineering and the artistry of mechanical repair.
Don’t miss this fascinating Process......!
Related Tags and Titles...!
#ExcavatorRepair #MechanicSkills #LatheMachining #Welding #Engineering #HeavyMachinery #MechanicalRestoration #DIYRepair #IndustrialRepair #MachineryRepair #restorationskills @pk-process @pkdiscoveringtechnology @CNCMaster00
Absolutely fascinating! Say what you will, this man is a craftsman, great skills! Well done!!!
🤣
Что за мода пошла все на резьбы и сварку. Резьба обычная не обеспечивает необходимый натяг деталей. Я понимаю если-бы резьба была конусная, тогда еще куда ни шло, а такой способ ремонта это полный провал. Только ради лайков.
strengthen the thread with brass solder
These poor guys have not gone to any kind of post highschool technical Institute. They have just picked up a few tricks watching other older unskilled welders and mechanics. They may be doing their best, and what they do sometimes looks impressive. But in reality it's bodge and dodgework. Only feasible in a place where there are no laws or courts or government standards.
Без синей изоленты работать не будет 😂
عمل ممتاز جدا جدا وعاشت اليدي ❤
Everyone crapping on the work and manner in which it's performed need to keep in mind that knuckle is probably from a truck built in the 60s. They have no choice to replace it , probably none around and can't afford a new one if they even find one.
YOU CANNOT STICK WELD CAST IRON TO HOT ROLLED PLATE. IT DOESNT WORK! NEVER HAS! NEVER WILL!
You can only braze cast iron and even then you have to preheat the material. This will never work!
it's from an excavator, not truck. And we have quite similar in new machines, they don't change so much through years. so availability is not an issue a think, but the price is. I bet over $3k for this part.
@@vetrieska11 WOW...! You pulled that comment from deep inside your colon...!
Your channel doesn't have any content to show your expertise ....
@@peatmoss4415 Just because my job is repairing, not streaming videos :D
I think this guy makes more money from RUclips than as a machinist,
There is a big difference between a mechanic and an engineer who makes spare parts. There are precise calculations. This is called a machining engineer
Они помогают людям! Вот в этом, кстати, и есть смысл коммунизма. А Вам лишь бы денег сорвать.
RUclips barley pays ANY Money.
They find always a Reason NOT TO Pay!!!
@@Muotaman9958 I have friends that make over 60k US a year.
Pppl
Fist you see all the voids in that weld and freak out.
Then you think to yourself: It is a threaded joint, the weld is there just to keep it from rotating; its gonna hold.
Then you notice the gear teeth and realize that the load path is rotational, not axial... What happens when you try to turn a nut loosely screwed on a bolt held in place by a chewing gum?
使用1分鐘就故障🤣🤣
Again, and expert with no content on his/her's channel....
銲接的面積不夠抵抗強大的扭力！
Muito bom mesmo este trabalho que vocês fazem parabéns 👏😊
Beautiful machine work.
巴鐵師傅真的技術高超，簡單工具，配件决少，一樣可以完全修復
VERY GOOD recovery service, BUT current is passing through the lathe spindle bearing, which will damage the machine. THEY HAD TO GROUND THE PART.
This guy is a Master of His Trade.....
جميل جدا مزيان بزاف رائع اللهم صل وسلم وبارك على سيدنا محمد وعلى آله وصحبه أجمعين ❤❤❤❤❤
Overloading vehicles can feed a bunch of good mechanics. Keep on with the heavy overloading!
ارفع لك التحية والتقدير
Kann man das überhaupt machen ,Gusseisen und Stahl schweißen?! Aber sonst eine sehr gute Dreh-Arbeit. Danke für das Video.👏👏
Expert jobb ✨✨✨✨✨✨✨✨✨✨❤❤
hega a dar medo ver o que essa gambiarra pode causar.
Оно чугунное!!! Оно отвалится
Q
Przepięknie jest to zrobione pozdrawiam serdecznie 👍👍👍👍👍
Przestań pisać głupoty, to się rozpadnie w kilka sekund, jak można spawać odlew ze stalą.
@@Jarobart2 Wszystko będzie dobra. Pomalowali go sprayu. +50 do wytrzymałości. :)
КЛАСС!!! Да у них там всё равно, что сталь, что чугуний - варится одним электродом и обрабатывается одним резцом. 27.00 - завели Виману...
Aqui no Brasil esse serviço chama-se Torneiro Mecânico. Não conheço em nossa região alguém que faça um serviço desse tamanho com essa qualidade. Parabéns
These guy's overload everything.
If it is worth loading, it is worth overloading. 🙂
@@paulkurilecz4209 That's why your truck's are all down not to smart illogical statement.
@@edwardmartinez9459 Its a joke son. I say, its a joke.
@@paulkurilecz4209 Was this a comic channel or repair channel as for me being your son that is illogical there is no extrapolation of logic.
@@edwardmartinez9459 Did you ever hear of the cartoon character Foghorn Leghorn? It was a characteristic line of his.
very expert and preciciion
Excelente serviço! Parabéns!!
Trik yang digunakkan sangat sempurna
Hola meparece que la rosca no es muy aconsejable para guía y el material original parece fundición y el que puso postizo es acero la resistencia no es aconsejable me parece a mi
Sungguh mengagumkan, idea dan kerja yang sempurna
Sucess...The youtube views paid the new part 😂
Melhor do que o original 2*
not to nitpick, but I personally would have taken a little bit more time in welding that adapter. I saw too many voids and inclusions. Not good where water is a potential concern in the environment. Allows for easier egress of water into the weld seam thus oxidize/rust build up, thus failure/breakage yet again. If its worth doing, it's worth doing right - the first time.
And the man will keep his job, that’s how he makes a living as long as it keeps breaking he keeps eating 🤷
Awesome way to repair that broken part , thank you .
Bahot shaandaar kaam hai aapka
Verdadeiro gambiarreiro!!
Yuri Alberto ninguém vai pagar estes valores 😅😅😅😅
When welding in the lathe, always have the earth clamped to the part, do not send the current through the bearing, this can seriously f**k the bearings!
I have rotary ground on the spindle, just like a weld positioner I bet they do also given they do this type of repair every day.
@@thepubliceye I doubt it very much ! Not many people know about the risque. I've worked with Pakistanies, great guys, but they have a different mindset !
Top demais
Excelente profissional
👍👍👍👍👍👍👍👍
الله يعطيك الف عافه انت باكستاني
Nice machine work but don't think it would stand up to much load
Nice job, pretty sure it won’t break again from the same place. Try to use work gloves !
BRAVO !!!
Esse cara é bom na restauração e recuperação. Se fosse no Brasil ja teriam descartado a peça e mandado comprar uma nova (sistema americano óbvio) .
You do amazing work ,I would love to own that large lathe,
Không thể tin được thật đấy
Hàn gang với thép thì không tốt .Không biết bằng que Hàn gì ?
Well done.
I enjoyed the beautiful job ,you have done
You are a genius
Great job.
суровый ремонт. Хз надолго ли. Токарь молодец
Робота бездоганна, блискучі розрахунки. Але як зварити чавунний корппус з металом, а потім метал з чавуном я не зовсім зрозуміло. Чи може особливі електроди???
Золотые руки.
عمل جيد وافضل من البلاد عمل مضبوط
Soportara esa pieza el mismo impacto al que fue sometida cuando se rompio esa pieza ya presenta fatiga de matrial la sodadura no reemplaza bien al conjunto de la pieza la soldadura no reemplaza al toal de la pieza ¿ Cuanto durara esa reparacion ?.Ahi hay que reemplazar la pieza por otra igual..A la vista es un buen trabajo.
Ловко!
👏👏👏👏
Интересно🤔💭 сколько продержалась такая пор.... фия
Excellent
👏👏👏👏👏
👍👍👍
Super , what is the welding rod you use to weld mild steel and castiron ??????
ما شاء الله
Апо мне а с техникой я с далеких 70 прошлого столетия то мужики молодцы ни чертижей ни спец приспособ и делают чудеса
Tjyýxqevbcchhch7v
I think everyone is missing the point! The videos are made for entertainment only that’s all and remember where the videos come from 🤷
Son maquina para quitarse el sobrero en sandalias con tornos vieguisimos soldaduras desfasadas y mira 😮😮😮😮
I thought it wouldn't work...then he painted the rust and I knew it would work just fine. It's those little details that bring a job together.
👏
goo work
Seems like the inner of the larger plate should have been welded as well, larger perimeter is now the weaker area.
While threaded, still not a bonded joint...
agree. would be stronger
ótimo serviço !
well done ! Can you weld cast iron?
Мастер "Золотые руки!"
Сказать нечего мастер профи
Should have "V'd" weld pathes for penetration. He cut the weld off.
If ya squint, it's mint!
But what about the root of the seam, boil it so that there are no pores?
🤗🤗🤗🤗🤗👍👍👍👍👍🇰🇷
And a good coat of paint will cover a multitude of sins
The spray paint makes up for the welding 😂
مصنوعی ٹانگ یعنی بریک کے بغیر
Very impressive repair. How did it hold up?
Wow! Great work! 👌👍
Nice repair, but you don't have brake on this wheel any more. steering axle = probably front (if not all wheel steer), so not nice.
Hope that excavator don't travel to fast.
have not seen you for a while was worried if you were okay
For me that piece will be short-lived 😁😁😁
Why does he thread everything rather than make fittings?
Are those safety sandals?
PAJAMALAND
Вроде бы ребята понимают, что и как надо делать, но делают так себе качество....
so-so bad, right?
@@bobhenry6159
Not bad but not good either.
Nice work but the attempt at a paint job was a waste of time.
What a disaster, I guess it fail after few seconds. And paint on greasy surface?
Comming from a hack !
😷🤒🤒
Маладес
whowwwwww
perfecto - you are the last hero's, in europe thay can yust change parts 😢
Ever wonder why there are so many one armed machinists in Pakistan?
По виду, стружкам и звуку металл чугун. И он варил электродом без присадок. Надеюсь это не ось машины.
Ну а что же это ещё если не ось. Это ступица.
У них специальные электроды по металучугунию.
How did he put the threads in the pieces ?
Simple he cut the OD and ID threads duh 😵💫
The arc soldering need really improvement to make better job and as already said, the V shape pathes would be welcomed and needed. I don't think it will be able to handle as much load than before it broke. Anyway, interesting to see but so many Not well done details.
Inadequate. Non-compliant. Insufficient. Shoddy. And worse. The welding is not up to any standard.
The little bit of shallow threading plus shallow welding, that's not sufficient. It's going to break again, and perhaps the first time it's loaded down.
Overloaded??
Its not loaded until its overloaded!