Hi thanks for your video, Can I use adc2011 on my 2022 pacifica using autel im508 and the same obd extension, because in this model is very complex to access the security gateway module. Thanks in advance.
Well depending. Last 2022 I did the star connector no longer works and you need to access through the 12+8. I have already videoed the job going to upload it soon. This is the star connector location HOW TO PROGRAM A KEY FOR 2018-2021 CHRYSLER PACIFICA / VOYAGER USING AUTEL IM508 & ADC2011 ruclips.net/video/8RCu9spvOQc/видео.html
With the autel maxilm im508 what year cars can’t you get ? I have up to 2022 but my coworker tried to tell me i can’t program anything over 2015 even though I have up to 2022.
Adapter: just google “ADC2011” and you will get best results next to you. Extension: I got that on Amazon. Make sure to get 12 ft so you never have problems.
If you using other tools for the program such as auto propad then you don’t need. You may be able to connect the G box and supply 12 V from outside instead of connecting to the OBD, though I highly recommend having an OBD extension it’s a cheap cable that will save you a lot of headache
@legacylocksmith7874 it's in the same spot. That's what I use (12+8). I actually got the ADC2011 yesterday for RAM cause that's in a hard to reach location!
Maybe. But sometimes if it tells you does not support in the system when you try to read the password, it’s Internet connection. Were you able to read number of keys?
@@legacylocksmith7874 i was able to read number of keys. oddly enough i went under 22 Jeep Grand cherokee and was able to read pin and program keys. i then went back to Durango, and i was able to pull the pin. maybe it was a fluke.
I keep getting the error "Reading password not supported by system". I am connected to my home network and I even tried connecting through my iphone tethering. Internet connection is very good and the web browser works. I can read all the modules and see how many keys are programmed. All seems to work until the pin portion. Do I need a current subscription for my IM508? It expired a few months ago. @@legacylocksmith7874
Can you use the adc2011 cable on2018 +chargers and challengers too ?
Yes. Sure. I have made video on that as well.
Hi thanks for your video, Can I use adc2011 on my 2022 pacifica using autel im508 and the same obd extension, because in this model is very complex to access the security gateway module. Thanks in advance.
Well depending. Last 2022 I did the star connector no longer works and you need to access through the 12+8. I have already videoed the job going to upload it soon.
This is the star connector location
HOW TO PROGRAM A KEY FOR 2018-2021 CHRYSLER PACIFICA / VOYAGER USING AUTEL IM508 & ADC2011
ruclips.net/video/8RCu9spvOQc/видео.html
With the autel maxilm im508 what year cars can’t you get ? I have up to 2022 but my coworker tried to tell me i can’t program anything over 2015 even though I have up to 2022.
He is wrong. As you can see in the video I’m doing 2018-2022
@@legacylocksmith7874 could you give me a private tutorial I’m having trouble with the tablet
Can a 2023 Durango be done...
@yuceftims4076 I think it should but not sure
@@legacylocksmith7874 I see that it's been some time. Have you confirmed since he asked about the 2023?
Can I use a Xtool D7 key programmer with the TDB084 12+8 bypass cable
I am not sure about programming capabilities of the D7 but as far as connection, I’m almost positive it would work
Hi how can i buy the adapter and the extension cable
Adapter: just google “ADC2011” and you will get best results next to you.
Extension: I got that on Amazon. Make sure to get 12 ft so you never have problems.
You can add key without erasing. The Autel says not but just avoid that.
Does JCD chords work?
They all do the same. Haven’t tried
Can i use xtool ik618?
I’m not sure about that
@@legacylocksmith7874 what about if i get the 12+8 cable it would be possible?
I’m not familiar with ik618 but 12+8 will definitely let you communicate with the 2018 and up models
Buenas tardes master el im508 trae topología de red?
Hey. I’m not sure I understand the question. It’s come with 1 year subscription and it’s can connect to network
Onde consigo comprar esse cabo ADC2011?
Just google ADC2011 and it will give you best options around you
Can you use just adc 2011 without obd? Will it still work?
If you using other tools for the program such as auto propad then you don’t need. You may be able to connect the G box and supply 12 V from outside instead of connecting to the OBD, though I highly recommend having an OBD extension it’s a cheap cable that will save you a lot of headache
I have I’m 508
Then just get OBD extension. Best solution for most models.
Okay thanks!
Hello how do i program a key for my 2017 charger? I have a maxi 508 programming tablet.
I’m not sure with the maxi but with the im508 you just do OBD. no bypass cable necessary.
Autel IM508 MaxiIM Key FOB Programming Tool, this is what I have. Do you have a video on it?
Perfect. So just do the same as you see in the video but on models below 2018 you don’t need to use the bypass cable
Where do I buy the bypass cable
Just google “adc2011” and see what available in your area. Some stores will be out of stock. It’s very popular cable this days..
Can I use the km100
Yes.
Does it matter what key programmer you use the adc2011 on ?
No. It’s working with most but some will require you to connect the OBD as well. And some like autopropad will need only the clip to work..
Does it matter what key programmer you use the adc2011 on
I replied
No. It’s should work with all programmers. Some of them would want you to put it in the OBD as well.
So this will work for 2022??
Yes. It’s should work for you.
what happens if i try to program 2018+ without the adc?
It will simply not work
@@legacylocksmith7874 thank u, can i use the red bypass cord?
@2face704 yes but it’s in harder to reach location
@legacylocksmith7874 it's in the same spot. That's what I use (12+8). I actually got the ADC2011 yesterday for RAM cause that's in a hard to reach location!
I am doing a 2022 right now and this doesn't work. May new witech oem software
Maybe. But sometimes if it tells you does not support in the system when you try to read the password, it’s Internet connection.
Were you able to read number of keys?
@@legacylocksmith7874 i was able to read number of keys. oddly enough i went under 22 Jeep Grand cherokee and was able to read pin and program keys. i then went back to Durango, and i was able to pull the pin. maybe it was a fluke.
I keep getting the error "Reading password not supported by system". I am connected to my home network and I even tried connecting through my iphone tethering. Internet connection is very good and the web browser works. I can read all the modules and see how many keys are programmed. All seems to work until the pin portion. Do I need a current subscription for my IM508? It expired a few months ago. @@legacylocksmith7874
If your able to read keys but not pull the pin what does that mean
@nelshonpires460 when you read pin what error do you get?
Thank you
Thanks for the support
Thank u
My pleasure