Hey I’m from the uk and just wondering do you only need the thing things u show the key obd system and the diagnostic tool because I’ve seen a couple videos were people have put some tiny black things into the little hole in the diagnostic tool so could u explain please?.
First off u don’t need to cut the hazards on 2nd if you have a 2018 or higher it requires an additional cord 3rd he’d did this the long way if you have the blank key that goes to that model and and you go to hot function instead of control unit and follow the prompts you’d literally have the car programmed in about 30 to 35 seconds also the km100 requires Wi-Fi not gonna work if it’s not hooked to Wi-Fi
Just curious have you had issues where the prox is weak when doing dodge/chry/jeep with the universals? The ones I’ve done require you the push the start with the key. Can’t keep it in the pocket and start.
@doubledown.1735 I just use the autel iKeys. But any after market one is going to be a bit worse than actual dealer ones. They'll typically work the way they need but not as good as OG ones.
he doesnt show u but u need a bypass, its either a bruteforce bypass which i think is what he did, or its 12+8 cable but if u look on the left, it doesnt seem like he opened that part up
Thank You So Much!!!was going through all the "regular" procedures that everyone else was doing and nothing worked but this one helped me
Thank you sooooo much!!! Just got me a 2022 Hellcat last night!!!
Did it Fr work
Ayo hmu
@@anthonyanchobe943yoo
@@Chiingona20-y4oyoooo
@@DiniRey-lm1fzyooo
Great video! I also found that you don’t need to use the hazards. Tried it on my 2016 & my buddy 2017 charger & worked just fine
What would be turning the hazards on for in the first place?
Can you use the tool straight out the box or do you need to buy a subscription for the key programming option
@@T64st straight out the box no subscription needed
@@T64st straight out of the box no subscription just do all the necessary updates
@@T64ststr8 out da box
Thank you!! I just programmed a key using your video. Thanks again
What year?
@@doubledown.1735 2015
Thank you so much !!! I now own a 2015 hellcat paid off 🙏🏿
Yooo
But if you have the port plugged in then you wouldn’t have to go through all those options right cause it should just read the car right?
Nice video, I lost my 2 keys at once and I bought this just to program a new key😭😭🙏works on my dodge
could you do a newer year durango with the autel km100 please ?
It’s the same thing just different years
@@mgkj4409so u can use that key to program anything 2020?
@@doubledown.1735yoooo
Great vid question will it work from outside the vehicle ?
No
Great video🔥🔥🔥first to do it with the km100 , good work! ADC 2011 used?
Gracias por tus videos.. Usate el cable 12 + 8... Gracias
Creo el cable 12+8 se usa en dodge del 2018 en adelante con el gateway secury system
Hey I’m from the uk and just wondering do you only need the thing things u show the key obd system and the diagnostic tool because I’ve seen a couple videos were people have put some tiny black things into the little hole in the diagnostic tool so could u explain please?.
Tiny black things were most likely transponder chips that some keys need to operate
First off u don’t need to cut the hazards on 2nd if you have a 2018 or higher it requires an additional cord 3rd he’d did this the long way if you have the blank key that goes to that model and and you go to hot function instead of control unit and follow the prompts you’d literally have the car programmed in about 30 to 35 seconds also the km100 requires Wi-Fi not gonna work if it’s not hooked to Wi-Fi
Is the sauce burnt out now??
@@bigtshotmusic?
Can this programmer works for 2016 BMW X1?
Vci straight to obd or 12+8 and star connected ?
Doesn’t need a cable it’s the most advanced tool that just uses radio waves to make a new key fob
Depends on the year 18 and newer is different
Does this work with a 2021 Dodge Charger? Does the bypass cable have to be connected before you do a universal key?
How do you know which is the right remote to generate? Thx
@MgbDracooit kinda doesn’t matter bring two keys and try both one of them will work 😂 worth it too
@@furheracker1121does a u universal key work for any year changer or what key does ?
how you turn on the hazards without power? the VCI override it ?
Just curious have you had issues where the prox is weak when doing dodge/chry/jeep with the universals? The ones I’ve done require you the push the start with the key. Can’t keep it in the pocket and start.
Weak battery may be?
Aftermarket ones like these sometimes have bad ranges. Usually they so may be a defective batch.
@@pjvmusicwhere do you get the keys from? I ordered from Amazon tried the key on a 2020 it didn’t connect
@doubledown.1735 I just use the autel iKeys. But any after market one is going to be a bit worse than actual dealer ones. They'll typically work the way they need but not as good as OG ones.
@@pjvmusic ok, what year you programmed?
Dealership here i come
How did you got the security code in the end?
he doesnt show u but u need a bypass, its either a bruteforce bypass which i think is what he did, or its 12+8 cable but if u look on the left, it doesnt seem like he opened that part up
Can you be on any WiFi? Even hotspot.
Hotspot works
Hi bro,
Dose it work with Challenger 2015 ? Thanks
Yes
What wi-Fi you need fa autel km100
Did u just connect VCI to OBD or use additional cable
Was wondering the same .
On 15-17 u don’t need a bypass just straight into OBD
@@Miguel-sy4fwyou for sure ab thia?
@@Miguel-sy4fwyoo
when you have the key programmed how what key would it be? red or black?
It’s random actually lol
@@furheracker1121 drop tele
Did you use a bypass cable ?
Bypass cable is only needed for 2018+
Good job
Can I do this same process one 2020+
It's help a lot thanks
I have 2 questions How did you Get inside the car Without The alarm going off How does the car have power as my second question?
Break the back window
The key gives the car power that’s what your programming
@@Chasinpape Thanks
What if it's smart key?
@@Chasinpapecorrection you can just use a tool to pull the window down you don’t need to break the window lol
You make that look easy... Where u located?
Does it work on bmw 2006?
Why is it when I go to universal keys Chevrolet doesn’t pop up and I’m on North America
Chevy having problems with km100, I use xhorse programmer for chevy.
@@paraquateerxhorse works too?
Yea obd programmer with keytool for some chevy stuff. I use topdon if im not sure usually. @prodkaaygee3x
He don’t answer no questions
I need help connecting the wifi need help
Can you make one for 2018+
u can but you need the star connector and vci bypass for 2018+ models
@@treybluntzso u can use that key for 2020?
Nice
Learn to program key.... first sound "walk away with some cash" 😂😂
do i need to plug in the obd while im doin it ?
This is not all keys lost . U added a key instead
Sir please explain 8a akl6 cable diagram please
Yea she is runner just with about every dash warning light on ! lol garbage cars made in America
هل تريد موظفين
I thought you needed to read the EEPROM for dodge vehicles?
Never