Видео

Very simple. Just download “Autel Maxi PC Suite” and that will do this part. Good luck 👍

Yes. Just follow this video HOW TO INSTALL GM DEALER TOOL (TECHLINE) FOR CAR KEY PROGRAM FOR THE NEW SYSTEM KEYS 2021-2025 ruclips.net/video/bxwU-cGj2tQ/видео.html

I’m so sorry to hear that. Good luck

No. I don’t think so

No. 3 models using FEM. not BDC

@@legacylocksmith7874how do I tell what immo system they have without being with the car? Would it work with VVDI 2?

⁠@@legacylocksmith7874wait so is this method working on BDC or on FEM? Because VVDI 2 can do FEM I know.

@Decreet this only for BDC. FEM always needs to come out unfortunately. Also, in the end of the video you can see what models are supported

@Decreet there is many charts on the Internet so you can see which one is BDC and which one is FEM

Yes, as long as you connecting the OBD as well

I think that this key can be modified with VVDI MB or you just remove a resistor or something like that. Try to lookup a video about that. Should be simple.

Yes. It should be the same. Just like that

@@legacylocksmith7874 you the man!

Thanks for your support

@@legacylocksmith7874 you’re the first channel I go to when I get a client asking about a car I haven’t done yet 👊🏼

@TheDersEffect8 🙏🙏 you guys are the reason I’m doing that. Keep it up 👍

Those cars are very bad. Try to put hazard lights close and open the door basically try to wake up the car.

@@legacylocksmith7874 thank you i have 7 mins left to find out its 2008 Maserati quadttroporte locksmith here we done tried 4 times

@@legacylocksmith7874 didnt work smh you right cars are badd

And definitely this one is one of the worst. But definitely should be doable with a lot of patience. I have done many of them.

In the USA we have only one option. Maybe check with dealer in your area

@@legacylocksmith7874 here there are 3 different frequencies. 315,433,868

As an automotive locksmith, you should always have a back up tool to use. Simple one that can be a very good backup. Will be the auto propad basic core version by xtool this will be the cheaper and the fastes. There is many other options and they are all good.

👍

No. OBD regular line it’s 2016

​@legacylocksmith7874 ok but the car is 2023, isn't it?

The whole purpose of this video is to show you guys that Mustang 2023 still regular programming. You’re welcome!

@@legacylocksmith7874 yes its much appreciated but i was just wondering when im suppose to use the autel canft adapter that they have

Basically, you only will use it when doing the models that require the FDRS which is not available to use as of now so to answer your question is your adapter is meaningless as of now. But probably in the near future, it will come back.

Thanks 🙏 for your support. I don’t. Maybe some ESL emulators since it’s very common

I just programmed a W211 EIS from a junkyard. It successfully generated a password. I finished the procedure. The red light went on then off but the key doesn't turn. Hmm, I wonder if this key is compatible with this EIS.

Yes. Only one kind of key. Maybe something else is wrong. Like the esl. For example, when the ESL is malfunctioning, the cluster will stay dark when you put the key in.

So hopefully to explain that better, after 2018 the dealer have put a system in those vehicles called “security getaway module” in order to communicate with the car with any tool you must use the bypass failing to do so you will not be able to program or to clear DTC or do anything Related to the computer

Yes. Working perfectly

@@legacylocksmith7874 thank you boss appreciate!

I think the 12+8 is in different places. I use this because it’s easy access.

Should work

Thank you so much for the wonderful warm words highly appreciate your support 🙏

Thanks so much for the warm words 🙏 This is exactly the reason I’m doing that. Good luck 👍

When it’s not working perfectly you need to figure it out looking on the feedback can help

I don’t think you can program a used key

So where did you get your key?

@Rocke03 on this one’s I will normally use the BMW AUTEL universal key. Works perfect and you can always reuse.

If AKL you just close and open the door and it will do the job

Thanks 🙏 for your support

Thanks 🙏

My pleasure. Thanks for your support.

No. The keyless is the PROXIMITY version of that key

⁠@@legacylocksmith7874so proximity makes it a smart key correct

👍

Thanks 🙏 for your support. You probably mean Toyota. If you don’t update your Autel it should still be the same

My pleasure. The Autel V200 is the OBD connection

@@legacylocksmith7874 are You using windows 10 ?

Thanks for your support 🙏

My pleasure. Thanks for your support 🙏

Thanks for your support 🙏

No. See this to understand how to do the c8 HOW TO PROGRAM 2021-2025 CHEVROLET CADILLAC GMC BUICK KEYS USING GM TECHLINE CONNECT SOFTWARE ruclips.net/video/WuyBH20TKok/видео.html

@@legacylocksmith7874 oh ok thanks but the km100 will work for 2017-2022 dodge charger

Oh yeah one question what to get so I can have WiFi for the programmer

Make sure in the Wi-Fi settings that the region set to your region

@@legacylocksmith7874 ok but you think the km100 for surely will work for programming key to 2018-2021 dodge charger with the bypass cable

Yes. I used Autel but with the code. I show the frequency so you know what to adjust to make it work perfectly. I’m not sure what was before I adjusted. I was playing with it to make it work perfect.

@@legacylocksmith7874 ok cool. There was a code? Like you had to purchase one? Did you have to use a bypass cable for this vehicle?

I have the cable. But in this case I have used the code. No bypass. Even though it’s very easy access to the 30 pin cable.

@@legacylocksmith7874 oh ok gotcha, how do get access to the codes?

NASTF

Those are just regular “Leatherman multi tool” I use this one all the time and really like it but any good set of pliers will do the job.

@@legacylocksmith7874 thanks

👍

It’s Xhorse key tool. More like km100 from different company they are doing Toyota for quite a while now. Autel just started so not enough selection.

Our pleasure

If you haven’t updated your tool it’s still working amazing. And don’t worry. It’s will be fixed. In this trade this things happen unfortunately but we will always find a way.

They all do the same. Haven’t tried

This one was OEM

Small difference in the chip I guess. But when you write the key I think the tool will prefer the A

@@legacylocksmith7874 i just orderd the mini prog and am going to work on a Toyota Corolla from 2000, just got confused wich one i should use..

In the US, our Corolla does not have a transponder on this year’s Even on the Camry, it’s usually on the V6 Models

​@@legacylocksmith7874in Sweden there was a law that every car from 97 had to have transponders or the car dealers couldnt sell new cars..

Interesting, in most countries it’s like that only the US does not require that by law it’s optional. We have 2020 year models that does not have any transponders.

About 12 minutes on most cases some will require 2 hours waiting time

Should be

My pleasure. If I’m not mistaken it’s this one 👇🏻 www.auteleshop.com/wholesale/autel-maxiim-ikey-premium-style-ikeyfd005hl-ford-5-buttons.html Enjoy

Yes I did. Some work some don’t. Hit or miss on this model

🙏

🙏

My pleasure. Yes. You got v200 with the km100

you can buy it separate online. I did and it works fine connected to my 508s

Not at the moment