Yes sir. It’s just a standard double din kit for that truck. The radio has a double din chassis and the screen mounts to the front after the dash is reassembled. If you don’t already have the radio, we can hook you up with everything you need and ship it to you.
Yes, it has separate volume settings for navigation prompts. Simply adjust the volume when the navigation is talking and it will set it at that volume and then go back to your regular source volume when the navigation prompts are finished.
Even though this is a 2009 car, would you Know does it work for a 5 highlander hybrid - and do you know which cameras are compatible for that camera setup
Yes, it will work in a 2005 Highlander. The camera inputs are composite inputs so most cameras are also compatible. It also has an input for the Kenwood DRVN520 drive camera that you can view from the radio screen. Thanks for the question and for watching. 😁
@@jacksoncaraudio5890what extras do I need for basic install? Some sort of kit? Something to integrate the basics with my specific truck? Backup cam. Sat radio etc? Sorry I'm new to this stuff. Can the integrated factory cam in my tailgate be upgraded to something clearer?
@@IMiss_The90s Give us a call or text at the shop and we can get you the information you’re needing. If you’re not local to us, we’ll help you find a reputable shop near you that can help guide you through the process and make sure you get the right equipment. 7316602834
Nope! Not to worry. 😁 The hinge on this unit is steel. I have this unit in my personal truck and it is super sturdy. Doesn’t even shake when I hit these Tennessee potholes. 😃 It’s my favorite radio I’ve had in 30 years.
Nice video, and seems like it’s mounted pretty much flush. I bought the DNR1007XR about a month ago and the reputable shop I bought it from wasn’t able to mount it flush in my 2010 Ram 2500. The bottom part of the screen sticks out over an inch and it looks very bad in my opinion. Have you guys mounted that stereo on a 2010-2012 Ram 2500 and made it sit flush like the one in this video? If so, what kind of kit did you use? I’d like to buy one, I’m in Houston, Texas.
Is yours a different dash that the one in this video? (It’s a 2009) We have to make small modifications and/or adjustments to most installations in order to get the best fit so it may be that your installer just didn’t do everything possible to get it back further.
@de_41 This unit doesn't actually have the SD slot there. What you are seeing is just where the SD slot would be on other receivers that have Garmin Nav built in. Those units "can" play from the SD slot, but you'd be loosing the built in navigation when you take the existing card out of the slot.
Yes, it does. It requires a specific trim piece and integration modules to retain oem features. Probably not a DIY project. Give us a call or find your local Excelon dealer for details.
Yes there is. Press the volume knob and it will show up in the options on the top left. There’s also a “screen off” option that I like to use at night.
Hi @203kbob, We’d need a bit more information about the trim level of your Ram. Can you shoot us a text please? 731-660-2834. Just mention “youtube” and we will get you an answer. 👍🏻
@@203KBob We’ll need to jump on a call sometime for that one. (Or swing by the shop). The short answer is that there’s not an interface that has been verified to work with your vehicle yet. But, that doesn’t necessarily mean we may not be able to make it work.
If you’re referring to the tire pressure monitoring system, the Maestro, paired with a compatible radio like this one, will display that information for your 2012 Tundra.
@@jacksoncaraudio5890 thank you The technician that set up my stereo skip this step I talked to I datalink this morning they told me to take it back and they will walk the technician through something that has to do with the wire they have to check it or re-harness it thank you Hopefully my 2012 SR5 will be working with all the functions of the maestro with the Kenwood compatible receiver I’m also having troubles with the gauge specifically the engine oil temperature gauge I can’t get that to come out either or the widget for the weather
It can on certain vehicles when used in conjunction with an interface for that vehicle. Give us a call/text at the shop and we can get some details about your vehicle and get you an answer. 731-660-2834
This unit includes wireless Apple CarPlay. Nothing else needed for that. If you’re wanting to “mirror” your iPhone screen to the radio without the ability to control it from the screen, you could use an HDMI adapter and you’d be able to mirror when the vehicle is parked.
@justiceknight6877 will not fit in the JL. It has a double din chassis which is too big for the subdash of the JL. However, We do have a 10” media center we us in the JL that has very similar features but has a remote mounted chassis. We have a vehicle specific dash bezel that makes it look factory too!
@justiceknight6877 We just posted a new video of the a Jeep JL upgrade that includes the Heigh10 radio I referenced. You can see it here: ruclips.net/video/Qyz4VlSfCtE/видео.html
The head unit is trash!! For $1000 dollarsbyou get a head unit that 2 years down the road will intermittently turn off and on over and over again even after replacing the stupid plastic piece in between the display and unit
I’m not sure where you purchased yours or who installed it but we’d be more then happy to try to assist you and get any issues your having resolved. Our guys are experts on these units and we have direct contacts with Kenwood so we’d love to help if you’d let us. If you’re not local, we can still help with tech support and/or warranty if needed.
![Ice On My Teeth - ATEEZ エイティーズ 에이티즈 [Music Bank] | KBS WORLD TV 241115](http://i.ytimg.com/vi/c-n92OgbbwA/mqdefault.jpg)
Yes sir, glad to help anytime!
Im in Memphis, I need this radio installed in a 2008 nissan armada. I like this install its so clean and still look factory.
Sure thing! Text/call us to discuss @ 731-660-2834
Loving this radio! I have a 2017 Grand Cherokee Alititude trim level. Do you think it would block the a/c vents with it's size?
I really don't think so. You can measure the space in between your vents to get an idea. The unit measures 10" wide by 7" tall.
even though you are 7 hours away from Chicago this install still in between the DMH-W8600 and this Kenwood -
Any suggestions for a 2020 Tacoma. The stock head unit sucks and no wireless android auto.
@okstever Yes, we can install this unit in your 2020 Tacoma. Shoot me a text at the shop 731-660-2834 when you're ready.
Do you know how to access the secret menu so that you can change the splash screen from kenwood to another image from usb?
Anyway just to get the dash kit? I would like mine as flush as possible. I’d have you install it but you’re 2000 miles away 😢.
Yes sir. It’s just a standard double din kit for that truck. The radio has a double din chassis and the screen mounts to the front after the dash is reassembled.
If you don’t already have the radio, we can hook you up with everything you need and ship it to you.
How does it handle the navigation voice volume? Does it have separate channels for volume like pioneer head units have?
Yes, it has separate volume settings for navigation prompts. Simply adjust the volume when the navigation is talking and it will set it at that volume and then go back to your regular source volume when the navigation prompts are finished.
Even though this is a 2009 car, would you
Know does it work for a 5 highlander hybrid - and do you know which cameras are compatible for that camera setup
Yes, it will work in a 2005 Highlander. The camera inputs are composite inputs so most cameras are also compatible. It also has an input for the Kenwood DRVN520 drive camera that you can view from the radio screen. Thanks for the question and for watching. 😁
@@jacksoncaraudio5890 oops i meant 2015 not an 05 year -
@@AppleiOSGenius yes, 2015 will work as well.
What are the options for this unit for a 2012 ram 2500? Front cam? Side cams etc?
Yes, All of those can be added. They can be integrated into the turn signal triggers to activate when turning.
@@jacksoncaraudio5890what extras do I need for basic install? Some sort of kit? Something to integrate the basics with my specific truck? Backup cam. Sat radio etc? Sorry I'm new to this stuff. Can the integrated factory cam in my tailgate be upgraded to something clearer?
@@IMiss_The90s Give us a call or text at the shop and we can get you the information you’re needing. If you’re not local to us, we’ll help you find a reputable shop near you that can help guide you through the process and make sure you get the right equipment.
7316602834
Thanks for the great video! What back up camera is that?
Thank you! It’s the Kenwood CMOS-740HD
Would this fit in 5th gen 4Runner?
Yes, it will. The chassis of this radio is a standard sized double din so it will fit any vehicle that will accept a double din.
@@jacksoncaraudio5890 thank you!
Will this unit fit in 2012 jeep Liberty?
Hi Steven! Yes, it will. It has a standard “double din” size chassis and the face mounts to the chassis after its mounted in the dash panel.
@@jacksoncaraudio5890 Good deal ! I was planning on a wall build. Need 4 cameras on that ride. Can't see with a wall build 😂
I can understand that! Ride around for about 15 years with a wall of, at the most, twelve 10” woofers! 🔊🔊🔊🔊🔊🔊🔊🔊🔊🔊🔊🔊😎
@@jacksoncaraudio5890 The only thing I might have a problem with is the plastic hinge behind the screen. I might break it 🤦🤦🤦
Nope! Not to worry. 😁 The hinge on this unit is steel. I have this unit in my personal truck and it is super sturdy. Doesn’t even shake when I hit these Tennessee potholes. 😃
It’s my favorite radio I’ve had in 30 years.
Nice video, and seems like it’s mounted pretty much flush. I bought the DNR1007XR about a month ago and the reputable shop I bought it from wasn’t able to mount it flush in my 2010 Ram 2500. The bottom part of the screen sticks out over an inch and it looks very bad in my opinion.
Have you guys mounted that stereo on a 2010-2012 Ram 2500 and made it sit flush like the one in this video? If so, what kind of kit did you use? I’d like to buy one, I’m in Houston, Texas.
Is yours a different dash that the one in this video? (It’s a 2009)
We have to make small modifications and/or adjustments to most installations in order to get the best fit so it may be that your installer just didn’t do everything possible to get it back further.
@@HogBadge No, it’s a 2010 but same dash. I have the feeling that they didn’t try hard enough, unfortunately. Where are you guys located?
@@TundraAbril We are in Jackson Tennessee.
Will it play music files from an SD card? I know it'll do usb. But on some videos I see an SD slot on the main unit behind the screen.
@de_41 This unit doesn't actually have the SD slot there. What you are seeing is just where the SD slot would be on other receivers that have Garmin Nav built in. Those units "can" play from the SD slot, but you'd be loosing the built in navigation when you take the existing card out of the slot.
What camera model are you using with this Kenwood? Looks Amazing.
That’s the Kenwood CMOS740HD. And yes, it’s incredible! Super clear picture even on the bigger screens. We love it!
Does this work in the new Rams?? I have a 21 Ram 2500 with the tiny stock radio and need to upgrade
Yes, it does. It requires a specific trim piece and integration modules to retain oem features. Probably not a DIY project. Give us a call or find your local Excelon dealer for details.
You ever install this on a 2013 to 2018 ram 1500/2500/3500¿
Sure have! It’s a great fit for those trucks.
@@jacksoncaraudio5890 Do you retain steering wheel controls?
Yes sir. Steering wheel controls are retained.
would this work in a 2001 Chevy silverado with a Double Din?
It sure would! I have one in my own truck. (2004 Silverado)
Assuming you’ve already done the double din conversion in your truck of course.
i havent, but i see there is options to do so if i decide to go with that particular Kenwood, thanks for the reply@@jacksoncaraudio5890
Is there a screen brightness adjustment?
Yes there is. Press the volume knob and it will show up in the options on the top left. There’s also a “screen off” option that I like to use at night.
@jacksoncaraudio5890 thanks for the reply. I adjusted it once but can n longer find it in settings. Il give this a go. Much appreciated
4:09
Can this be installed in a 2022 ram 2500 Tradesman?
Hi @203kbob,
We’d need a bit more information about the trim level of your Ram. Can you shoot us a text please? 731-660-2834. Just mention “youtube” and we will get you an answer. 👍🏻
@@jacksoncaraudio5890 It is the base model 2022 Ram 2500 Heavy Duty with a stock 5" radio.
@@203KBob We’ll need to jump on a call sometime for that one. (Or swing by the shop). The short answer is that there’s not an interface that has been verified to work with your vehicle yet. But, that doesn’t necessarily mean we may not be able to make it work.
what dash kit did it need I have same truck
We use a Pac CDK642. The chassis is a standard double din.
Nice job! Great video
Thank you so much!
How do I retain the psi 2012 tundra
If you’re referring to the tire pressure monitoring system, the Maestro, paired with a compatible radio like this one, will display that information for your 2012 Tundra.
@@jacksoncaraudio5890 thank you The technician that set up my stereo skip this step I talked to I datalink this morning they told me to take it back and they will walk the technician through something that has to do with the wire they have to check it or re-harness it thank you Hopefully my 2012 SR5 will be working with all the functions of the maestro with the Kenwood compatible receiver I’m also having troubles with the gauge specifically the engine oil temperature gauge I can’t get that to come out either or the widget for the weather
Does this radio work ac controls?
It can on certain vehicles when used in conjunction with an interface for that vehicle. Give us a call/text at the shop and we can get some details about your vehicle and get you an answer. 731-660-2834
also, I subscribed to look for more vids
Hola cómo instalar este mismo modelo con el Mirroring con un celular iPhone, gracias
This unit includes wireless Apple CarPlay. Nothing else needed for that. If you’re wanting to “mirror” your iPhone screen to the radio without the ability to control it from the screen, you could use an HDMI adapter and you’d be able to mirror when the vehicle is parked.
Gracias por tu respuesta
El CarPlay me funciona muy bien, pero con la App Mirroring de Kenwood no se deja emparejar….
El adaptador hdmi tiene que ser con un convertidor o un cable normal hdmi a con conector de iPhone…?
You’ll need a lightning to HDMI adapter and then plug into the back of the radio where you’ll find a standard hdmi port.
Can I fit this in a jeep jl
@justiceknight6877 will not fit in the JL. It has a double din chassis which is too big for the subdash of the JL.
However, We do have a 10” media center we us in the JL that has very similar features but has a remote mounted chassis. We have a vehicle specific dash bezel that makes it look factory too!
@justiceknight6877 We just posted a new video of the a Jeep JL upgrade that includes the Heigh10 radio I referenced. You can see it here:
ruclips.net/video/Qyz4VlSfCtE/видео.html
The head unit is trash!! For $1000 dollarsbyou get a head unit that 2 years down the road will intermittently turn off and on over and over again even after replacing the stupid plastic piece in between the display and unit
I’m not sure where you purchased yours or who installed it but we’d be more then happy to try to assist you and get any issues your having resolved. Our guys are experts on these units and we have direct contacts with Kenwood so we’d love to help if you’d let us. If you’re not local, we can still help with tech support and/or warranty if needed.