The best part about penny boards is that they won't get soggy when soaked in water. I restored the parts from my cousin's broken nickel board to use on mine
This makes me want to buy a penny board again, had one for years but eventually sold it since I didn’t ride it anymore. I think it’s time to order a nickel board and go cruising again..
This video is the perfect exaple of what you should do when restore a skate, the only thing is to take off the shield of the bearings to a better clean
I bought a used $20 Penny Nickel for my son, I weigh too much for anything other than a longboard. Anyways, the Nickel had been slightly scavenged for parts. It was missing two bearings and the pivot cups had dryrotted and fell apart. Conveniently, two of the 8 bearings I had just pulled off my longboard had life left in them, so instead of burning a new pack of bearings I used those. I ordered some pivot cups but got impatient and printed replacements out of TPU. Previous owner said the board was barely ridden and I believe him. It's back to good now, although admittedly a set of Reds or better would wake it up some more. I'll install some down the road. I know this is an old video, the only suggestions I'd make would be to try Evaporust for rusty hardware and don't forget the pivot cups. One of yours looked kinda beat. I'm debating replacing all the hardware on our boards with stainless, which would stand up better to moisture than regular steel.
I have a longboard and a couple skateboards and I would've just replaced the wheels and hardware but it's cool that you were able to save it all. Cool video. Would love more skating stuff in the future!
i think a "Penny brand" is a worthy investment when it comes to cruiser boards, even tho its expensive i got a knock off one 3yrs ago , its a good board and i got it cheap, but after cleaning it, the pivot cup came off into pieces, this penny you got has amazing components still holding up even after 8yrs
Cool vid. You should check out one of Gee Milner's dream build bike videos. Very cinematic and no talking. Quite satisfying to watch as well. You might be able to do something similar with a dream gun build or something.
Hey good Sir. Im just new to this. I wish you could help me. I just bought a used Penny Board Nickel, and it seems missing a part. That small rubber like bushing on the tracks. Do you know what's it called?
most skate bolts/crews are powder-coated (they are a matte black color), diesel will not damage this, but if you want to, you can buy something called bluing liquid, get rid of the powder coating (with wire brush, steel wool, etc) and darken the screws with the bluing liquid, the look pretty good and the finish is pretty durable.
At the minimum should have put in new bearings, I would have replaced the trucks, wheels and hardware, but that's me The Penny company sells all the parts if you want to keep it to the Penny brand
Am I the only one who gets bothered when anyone calls penny boards and long boards "Skateboards". I think it comes from people claiming that they "skateboard" when they actually just cruise on long and penny boards.
Recommend watching with headphones for asmr
I love that you put no music so we could hear all the sounds and change of sounds. Great video man!
This was oddly satisfying and just clean. Thank you Talon
Thanks for watching Henry
Agree
The best part about penny boards is that they won't get soggy when soaked in water. I restored the parts from my cousin's broken nickel board to use on mine
Really enjoyed how you shot this and kept it silent. Looks brand new!
This makes me want to buy a penny board again, had one for years but eventually sold it since I didn’t ride it anymore. I think it’s time to order a nickel board and go cruising again..
This video is the perfect exaple of what you should do when restore a skate, the only thing is to take off the shield of the bearings to a better clean
That's dope. I just got a penny board for my 5year old daughter. She loves it 🤙🏼
Bruh, I'm getting flashbacks to my old Alien Workshops Skateboard. Actually, I think I still have it.
IMMA YEET OUT
This video should have millions of view! So satisfying! Good job! I got a Nickel board today and I’m happy to see that last for that long!
Thanks for watching! Enjoy the nickel 🤘🏼
I bought a used $20 Penny Nickel for my son, I weigh too much for anything other than a longboard.
Anyways, the Nickel had been slightly scavenged for parts. It was missing two bearings and the pivot cups had dryrotted and fell apart. Conveniently, two of the 8 bearings I had just pulled off my longboard had life left in them, so instead of burning a new pack of bearings I used those. I ordered some pivot cups but got impatient and printed replacements out of TPU. Previous owner said the board was barely ridden and I believe him.
It's back to good now, although admittedly a set of Reds or better would wake it up some more. I'll install some down the road.
I know this is an old video, the only suggestions I'd make would be to try Evaporust for rusty hardware and don't forget the pivot cups. One of yours looked kinda beat.
I'm debating replacing all the hardware on our boards with stainless, which would stand up better to moisture than regular steel.
I have a longboard and a couple skateboards and I would've just replaced the wheels and hardware but it's cool that you were able to save it all. Cool video. Would love more skating stuff in the future!
So satisfying to watch
Thanks Hector
i think a "Penny brand" is a worthy investment when it comes to cruiser boards, even tho its expensive
i got a knock off one 3yrs ago , its a good board and i got it cheap, but after cleaning it, the pivot cup came off into pieces, this penny you got has amazing components still holding up even after 8yrs
Now it’ll last another 15 to20 years🤘🤘
I feel this is one of the only talk free videos I have seen!
Cool vid idea Talon! It's pretty cool you were able to save every part.
Really liked this video. I would love to see more stuff like this! Keep up the great work man.
Thanks mason, I have a few more ideas for videos similar to this. Thanks for watching 🤙🏻
Excellent video! I love the expanding artistry your showing!
Thanks Brian 🙏🏼
This made me think of my skateboard. I think it’s 37 years old. I haven’t rode it in 20 years.
Vuelve a montarte en una !!!👍👍
Lol, Funny things is...I sat through the whole video, heard the music at the end when I realized it was your Talon. Cool video.
That's why I have a dark Penny Nickel 😎
This was truly fantastic. Pleaseeee do more. ASMR knife sharpening or gun cleaning or something
Cool vid. You should check out one of Gee Milner's dream build bike videos. Very cinematic and no talking. Quite satisfying to watch as well. You might be able to do something similar with a dream gun build or something.
I don't know why but I'm about to get a nickel board amd this video is so satisfying and making me want to always maintenance my board when I get it😂😂
quarantine got me all jacked up, I actually watch this whole video wtf lol. great video
Thx man ,I subed and will support your channel
Welcome 🙏🏼
@@TalonSei can support mine too?
Cleaning and Sharpening knives will be cool in that kind of video concept :D
I literally just went to do this same thing. And I rode it of off a 4 inch lip in my garage and it snapped smooth and clean in half lol.
I really need to do this with my skateboard! Especially with my eboard!
ASMR? I thought this was a skateboard video. Literally, just listened to the audio xD
Very Cool - Really Enjoyed This!
Dang now I want to rehab my old board!!
Do it!
Hey good Sir. Im just new to this. I wish you could help me. I just bought a used Penny Board Nickel, and it seems missing a part. That small rubber like bushing on the tracks. Do you know what's it called?
ASMR🔥🔥
Hey talon ! Love the videos man, I was wondering what work bench do you use, always see it In the videos and been wondering.
It’s a Husky workbench
@@TalonSei sweet ! Thanks man 👌🏼
Talon could make a asmr channel lol
Good content. Keep it coming
Not a word said just work being done. I enjoyed the video my g. Reminds me of Slavik Tely’s channel.
cool thanks for watching!
Talon Sei no problem. You have any patches? My vertx ready pack comes real soon and I need a patch
Good video
I still have a Powell Peralta board in the attic. I wonder if it’s worth something now
Would you recommend this as a good commuter board? Just got a University job and in looking for something to get around campus.
This is what I entire time in college
Entertaining
Thanks Mark
Will diesel fuel remove paint from the screws. My screws are black with some rust build up
most skate bolts/crews are powder-coated (they are a matte black color), diesel will not damage this, but if you want to, you can buy something called bluing liquid, get rid of the powder coating (with wire brush, steel wool, etc) and darken the screws with the bluing liquid, the look pretty good and the finish is pretty durable.
hello, is it normal for my truck's kingpin to rotate?
Just like new again! #TS
Was this ASMR? Lol I got casney neistat vibes towards the end. 😎
I have the exact same board
If it has the "since forever" on the back what year is this nickel? I notice some boards dont have that.
I’m not sure. I have had it for years. Since I first heard of penny probably back in 2010ish
Why were the bushings bulging out?
But what type of lub and grease do u use?!
At the minimum should have put in new bearings, I would have replaced the trucks, wheels and hardware, but that's me
The Penny company sells all the parts if you want to keep it to the Penny brand
The board is still great tho, no need to spend any money.
@@TalonSei Bearings at least, make sure it spins good
They spin great, just like the video shows. Zero dollars spent 👍🏻
Different video but 👍👍👍👍
Are we going to talk about the state of your sink?
What about it? It’s a garage / workshop sink.
@@TalonSei amazing video as always. Thank you sir!
What kind of grease works best ?
Any skateboard bearing lubricants like bones speed cream
#dopestvloginthegame #allblackeverything
Gotta use a spell checker next time
You should straight pipe it
Add asmr to your resume... weirdly satisfying
My penny boards not turning
Am I the only one who gets bothered when anyone calls penny boards and long boards "Skateboards". I think it comes from people claiming that they "skateboard" when they actually just cruise on long and penny boards.
It depends tho because some people can actually do more than cruise on their boards
Kind of too quiet
my penny board is way worse that this
think he lost his voice:)