From a skaters perspective this is weird. The deck was ok, wouldve just regripped if anything. Wouldve replace the bushings and bearings then skated it.
I've noticed the same thing in the comment section. Yeah I agree with it being water logged and sanding the wheel but at the end of the video it was a sweet look
honestly it’s pretty cool to see this guy doing what he likes, even though it’s not really something skaters would do it’s still cool to see what he could make of it
I'm very glad that this channel isn't like most "restoration/refurbishing" channels that just buy new stuff and say its restored instead of actually trying to fix what's broken, great job!
I respect this so much. Skateboards are such wonderful things, but yet we treat them like disposables. Each part on a skateboard is special and this setup is getting the new life it deserves.
He didn't show everything he used and the spray painting is not necessary. I would like to do the same with my first board, but probably replace some parts.
@@IvanFazekas definitely not rich just took a bit off a break left one of my boards alone for a good while now I wanna see if I can bring that sucker back
"Cleaning" Also the board is definitely not old, and no ones grip tape looks like that naturally. I would put money on the line to say that he owns the board anyway and just made it look old.
@@thesharinganknight Please excuse poor usage of words. Abandoned things are old I thought, but you are correct. Althoigh the video is definitely fake.
Lyrikek you good people disliking the video and thrashing the board and his gripping bc of not knowing what the word is. I honestly don't care about my board not gripping at the edges bc you can sand it down. At least he didn't get air bubble ya know?
Fico muito feliz em saber que se preocupa tambem com a descrição brasileira tanto que quando precisei ler a descrição entendi tudo muito obrigado +1 like e +1 inscrito
The weird thing is he has a element griptape file and it's been well used. It's the weirdest thing. He uses the worst creased griptape, and he didn't even use the griptape file for what it was meant for. Then him sanding the wheels was just painful to watch. All his wheels are going to be different sizes and possibly have a flat spot
salve rod! te acompanhava lá pra 2015. muito foda esse conteúdo que você tá trazendo, esse estilo de vídeo eu só via gringos fazendo. feliz demais por ver um BR representando. tu é fera. tmj!
@@thousandcanine i think what was meant was that he didn't "sand down" the edges of the grip before cutting off the overhanging griptape - as you would normally do with a wrench, skatetool, or any metal item, so the griptape is easier to cut afterwards :)
From a skaters point of view this is the most painful and unsatisfying thing to watch.. I mean he sanded the wheels, he cut the grip tape before sanding it, he actually cleaned the bearings and bushings instead of replacing them like any other person because either way those will never work properly ever again. Edit: this is my most liked comment thx
Instead of saying shit about the video, try to look the before and after and see the difference between both. You north americans are so boring, try to be less "ugh" please.
@brendon hayes thats not the point man, all the english comments are saying bad things and not supporting this amazing sk8 channel, instead of the portuguese ones. Sorry if this is your point, but its not cool seeing him, a brazilliam channel, trying to get the international public and all of them saying negative things about his videos...
Esse cara é muito bom, acabei de ver o canal dele, primeiro vídeo foi esse, muito bom, e muito satisfatório os barulho, do krl, parabéns. E ainda é brasileiro, que orgulho
I'm not sure if it's just me but I feel like an aspect of the old board should have been kept. It's an incredible transformation and it's awesome that so many parts were kept but I feel like the soul of the board was lost. Again, incredible transformation. The before and after look like completely different boards.
I mean, why wouldn't it be skateable? it's an uncracked deck with brand new bearings brand new grip tape ok trucks and essentially "worn out wheels" im confused.
Daniel Benitez If you look at the bird in the beginning of the video, you can tell it was very damaged. Just making it look new does not mean it won’t snap almost instantly. That’s why skaters replace their boards every 6 months/1 year because the wood gets weak.
@@misterj9619 Not to mention at the beginning of the video It looks like this board has been waterlogged many times over. Like it sat outside under a deck or something and dried. Causing the pores of the wood to open and lose repeatedly losing their structural rigidity.
How was it fine to begin with? Wth r u talking about? It had rust and gunk all over the place, I see nothing wrong with cleaning and maintaining it. Do you ever go out with dirty stinky clothes? I mean, sure a board isn't the same thing and it doesn't need to always be clean but never ever cleaning it says something about you as a person.
Wd40 is water based I'll never.. ......NEVER!!!!!!!!!! use it on my bearings EVER AGAIN it'll just melt right off the wheels 😓🤭🤬. just use Crisco or any dollar store cooking oil to soak bearings 🤭🤭
Incorrect it displaces it. Eg the name. Water displacement 40. The proper thing to do is use WD 40 to remove moisture dirt and corrosion then pack the bearing with a suitable PTFE lube or grease.
Bearings are toast, no surprise there. The bushings, hardware and axels are where you got lucky. Usually need to be rethreaded. No pressure cracks in the wood show the previous owner really wasn't that active on the board. It's practically brand new deck.
Cara incrível esse vídeo! Tô participando de um projeto que recebe peças de skate usadas pra montar skates pra um projeto social de aulas de skate e isso vai me ajudar a restaurar as peças usadas que a gente recebe, muito legal!
Love how people are missing the point. He wasn’t fixing the board up to use but just to restore it as a project, I love how you used as much as the original stuff as possible great job mate
PrLx Geo except it isn’t, actually. in actuality WD40 is a solvent or rust dissolver, the lubrication is a byproduct of its components, the same components that will attract dirt and seize your bearings the minute you start skating
Me after finding an old Walmart board but really wanting to skateboard: this video Me a month later asking for a new one so I can practice off grass: this comment Me 6 months later still waiting to get a new board: 👁👄👁
@@sharpensaturation7156 I found a walmart board that my mom got for my brother a few years ago, so I brought it inside to clean it and make it slightly rideable. (hint it didnt work) So then I asked my mom for one and she basically said that we have one at home, but now shes going to get me one
@@daidoexposure specifically for the bearings, you don’t wanna use WD-40 because the solution doesn’t properly lubricate the bearings. You wanna use a silicone-based lubricant so that it doesn’t dry out
@@luisalas24 WD40 makes your bearings rust... it evaporates, leaving all the dirt clumped up in your bearings. the dirt scratches out the tracks the balls run in, which causes more friction, which causes heat and slower bearings altogether until they freeze
Ya this is either fake or the person riding it NEVER did manuals or wasnt scared to ollie a 10 stair like look at the tail I mean there should be a little razor tail if it's that old right
@@sam.setzer4936 old doesn't mean used/worn. It's actually restoration of ABANDONED skateboard, which means different to all of those. Look it up! A board could be brand new and abandoned. This board was DIRTY and ABANDONED. That does not mean it will have wear LOL.
When I was a small child, I had a skateboard that got left outside. It didn't hold up because I didn't understand how to take care of it. I also didn't really skate it, so it didn't have razor tail either.
Grip tape doesn’t come off that easy unless it was setup a few days before. If this board was actually old he’d need a heat gun to melt the glue and it wouldn’t be coming off like a bandaid like he’s doing at 7:30 . I’ve taken grip off old snapped decks it’s not an easy task
Great work, ignore the haters. The board is not ruined and perfectly skatable, only noobs bellieve its not, you don't need the newest, best skateboard. Have you seen what Rodney Mullen skated in the 80's and he still did sick tricks and even invented tricks on shitty boards.
@@Darkalms any skater would know slicing off 1-2 mm on each wheel individually for the cleanliness would make them unbalanced with one another since it won't be perfect
@@renanmonteiro5845 you take the griptape, put it on the deck, (be careful to not create air bubbles under the griptape) stick the griptape in the deck then take a screw driver or any metal piece an slide all around the deck so the griptape takes the shape of the deck, then cut it, and in the end smooth it out with the griptape you just cut.
Tinha parado de assistir o Rod a muito tempo atrás, RUclips me recomendou esse vídeo e assisti pensando que era gringo kkkkk. A qualidade melhorou demais seloko.
From a skaters perspective this is weird. The deck was ok, wouldve just regripped if anything. Wouldve replace the bushings and bearings then skated it.
True
this guy probably sells them
true
playboi carti did you watch it? he used all the same parts
The weirdest part is definitely him spray painting the trucks sliver
velho imagina o trampo que deu... isso merece atenção de verdade o Rod é uma lenda parabéns aí irmão sucesso
Verdade mano isso aí🤙🏻
Sim po de fato mano
Ne mano
Ficou top mano mais ainda continuava valendo mais a pena pegar um skate novo kkkk
@@betogame5820 .....?que. ...............?.??..
I never thought someone could get so much hate for trying to clean up a old skateboard
I've noticed the same thing in the comment section. Yeah I agree with it being water logged and sanding the wheel but at the end of the video it was a sweet look
i know its dumb
Same, even thought the skateboard probably won’t be skate-able it still looks pretty clean
its because u simply cant because once the woods fucked up and water logged then its pointless and sanding the wheels is so dumb
@@andyguzman1360 it ain’t about making rideable bruh, he is just making it look nice. Of course he ain’t gonna ride that
Esse é o terceiro comentario brasileiro q vc tanto procura
E este agr é o quarto
@anaah sexto
lol
e o segundo amigo
Esse e o setimo
honestly it’s pretty cool to see this guy doing what he likes, even though it’s not really something skaters would do it’s still cool to see what he could make of it
If you mean he’s doing this for looks then yes..if you mean he’s doing this to actually use it then no
@TheStinkyPoopooHeadz hmm yes plank of wood 🗿
@TheStinkyPoopooHeadz you right
@月Lua Natsuki it’s still a skateboard.. what do you mean no way to use it again? It’s a perfect skateboard…
They would've made new graphics!
I'm very glad that this channel isn't like most "restoration/refurbishing" channels that just buy new stuff and say its restored instead of actually trying to fix what's broken, great job!
To be fair the bearing should be replaced regardless since they're cheap and of an unknown brand.
@@FranksShitBoxCollection nice pfp
well sometimes things are too broken to be fixed. it’ll just be a pain in the ass to restore.
Verdade hhahahah
Emoji hasn’t been around for that long
Tip:Use a blow dryer when removing grip tape, it helps with losing the adhesive making it easier to peel off.
Yup
Yes, but old grip tape is fairly easy to take off.
I respect this so much. Skateboards are such wonderful things, but yet we treat them like disposables. Each part on a skateboard is special and this setup is getting the new life it deserves.
You skate on it, it's gonna get dirty ☠️
To be fair they are made to be thrashed and beat up
Enjoi deck, Crail trucks, Moose hard bushings, Bones Reds bearings, 52mm wheels. Whoevers board this was had a pretty nice setup 👌
Ok but what hardware??
@@jccs98 shortys lol
Bushings are Moog, Crail Trucks from Brazil uses Moog.
@@rosiewright5684 shorty's the best
N é red bones
Even with that "restoration" I bet that board rides like a wet log.
lmao
Best restoration would've been a new set of wheels, bearings and trucks... and maybe some grip tape...
Glocky lmao soo true👏🏽👏🏽💯
@@philb6416 might as well buy a whole new board, then that shit that has no pop
@@philb6416 the truck's have 0 reason to be replaced and he did replace the grip tape..
I felt physical pain when he cleaned the bearings with wd40
Same, I would’ve just dipped them in Hydrochloric acid. Either way, it was not as bad as the grip job
@@zerajnimegroj3012 ik when he just cut the edges without grinding that shit down I was screaming
you can technically clean the bearings with wd40 you just cant lubricate them with it
@@borisabomg1049 you can't do either
@@borisabomg1049 why noy
nunca vi um conteúdo de restauração brasileiro, e ainda mais de skate. incrível.
In the beginning I thought “I actually have an old board, maybe I can follow his steps“ ehm I better buy a new one
He didn't show everything he used and the spray painting is not necessary. I would like to do the same with my first board, but probably replace some parts.
Buy new bushings pivot cups griptape and bearings then your good
Trust me its not
@Steven Uhlig thank you :33 I appreciate this. Probably start in a weeks. 😅 I need to buy a few things first and need a few quiet hours :3
@Steven Uhlig I love that skaters help each other thank you brotha!💪
The guy who lost the skateboard watching this like: 👁👄👁
😂😂😂😂
He lost it like a year ago
No bro more like 📀👄📀
Nah more like 🥚👅🥚
Me senti mo bilíngue entendendo o que ta escrito hehe🥑
Eu sigo esse canal desde o como mandar flip,que ele gravava dentro de casa msm e zuava muito !! Que orgulho
só os og lembra kkjkjjj
henryto Real 😂😂😂
tempo bom
Krl achei que só eu peguei essa época kkkk na época que ele ensinou pop shove it em casa tbm
Pdp kkkkkk
I’m curious to know who would abandon a board with nearly zero tail wear. Beautiful end product though- nice job
Lots of people. Why do you think we are watching this video
@@sever427 😬 ohhhhh okay. Guess I’m not rich enough to feel that way. Pass me a couple bucks your Highness 👑
@@IvanFazekas definitely not rich just took a bit off a break left one of my boards alone for a good while now I wanna see if I can bring that sucker back
@@loli_cvnt5622 whoosh. His name has the word emperor in it. Guess that flew over your head. Edit: gotta clarify - it. Was. A. Play. On. The. Wording.
Who knows it still had lots of life to it.
When your homies tell you to get a new set up, but ur dad is this
wut
💀😂😂
Lol
My das is goin to buy milk
i mean, I'm sure half the kids in these comments would be happy to just spend time with their dad. I know I would have.
I like how he used gloves for non important things but when he ACTUALLY needs gloves he uses his bare hands!!
(ง'̀-'́)ง
and he sands with the grit against his palms.
Hahahhaha
Imagine this was your board you lost in years and you found this video watching this guy cleaning it LMAO 🤣🤣😂
🤣🤣🤣🤣🤣
"Cleaning"
Also the board is definitely not old, and no ones grip tape looks like that naturally. I would put money on the line to say that he owns the board anyway and just made it look old.
Lyrikek not to say if it is fake but do you know what abandoned means. A mansion that can be newly built can be abandoned. Cmon man
@@thesharinganknight Please excuse poor usage of words. Abandoned things are old I thought, but you are correct. Althoigh the video is definitely fake.
Lyrikek you good people disliking the video and thrashing the board and his gripping bc of not knowing what the word is. I honestly don't care about my board not gripping at the edges bc you can sand it down. At least he didn't get air bubble ya know?
Props to this guy for cleaning all the parts, I'd probably just save up a bit of money and buy some new trucks, gripetape and some wheels.
You'd need to buy the whole thing new noob. That decks already weak
@jay It still functions, I could care less about skating a "soggy board"
yeah like if that skateboards covered in water that boards doneso
@@dunnod I guess it depends, it might break fast but again it still functions yk
Actually the trucks were fine after some easy cleaning so I’d just buy bearings, wheels, hardware and bushings
Fico muito feliz em saber que se preocupa tambem com a descrição brasileira tanto que quando precisei ler a descrição entendi tudo muito obrigado +1 like e +1 inscrito
O cara e brasileiro mano olha nas coisas que ele usa tá tudo em português
Ele é br
Só vi por causa do seu comentário
Nossa achei um br
Que orgulho ver esse canal crescendo!!! Assistia quando estava no comecinho .
Prove!
Complete a frase: Hoje vai chover (...).
😂
@@carlos_cfcs Celta preto
BRINKS
tbm mano
porra nenhuma kkkk
Engraçado que a maioria dos comentários são gringos kk sucesso aí pra ti 🤙🏻
@月Lua Natsuki por que ele n pode ser ultilizado?
@月Lua Natsuki mas tipo acho desnecessário falarem mal do cara por isso né
@月Lua Natsuki vc andou nele pra saber??
Até eu pensei que era um vídeo gringo kkkkkk fui tapeado
Br
Skating with open ball bearings?! What a madman
Antes eu ficava procurando comentário em ingles mas agr eu enjoei e quero os br dnv
To aquiii
nois e br
Kjj
oiii cara kkkkkkk
Kkkkkkkkkkkkkkkk pode cree né
IT WAS SOOO PAINFUL WATCHING HIM GRIP THE DECK...
The weird thing is he has a element griptape file and it's been well used. It's the weirdest thing. He uses the worst creased griptape, and he didn't even use the griptape file for what it was meant for. Then him sanding the wheels was just painful to watch. All his wheels are going to be different sizes and possibly have a flat spot
Why?
@@rileygibson242 didnt file it and its horribly creased. Also how he cut it
Olha o rod virou estileira gringa brabo kkkk🔥
salve rod! te acompanhava lá pra 2015. muito foda esse conteúdo que você tá trazendo, esse estilo de vídeo eu só via gringos fazendo. feliz demais por ver um BR representando. tu é fera. tmj!
So he did everything but sand the edges of the griptape before cutting it
Yes and my bones are shaking and my skateboards are hiding
The ONE thing that needed sanding
Also he couldve just applied heat to the fucked griptape instead of ripping it off
What video did you watch? He definitely sanded the edges of the grip. . .
@@thousandcanine i think what was meant was that he didn't "sand down" the edges of the grip before cutting off the overhanging griptape - as you would normally do with a wrench, skatetool, or any metal item, so the griptape is easier to cut afterwards :)
Can we appreciate the fact that he didn’t wash the board
Good point I'm kind of surprised he didn't Wash the board
It would’ve waterlogged the deck but he doesn’t know anything about skateboards so I’m also surprised about that too 😂
Yes yes we can
He put wd40 on the bearings🤦🏽♂️ and the boards already cracked so it’s more than likely gonna break. But still good video
yuck
I’m just curious why whoever owned that board griptaped it like that
What do you mean
@@alyssawitt14 because it looks like it's cobbled together from different pieces
They prob tried to do a grip design cuz some people do stuff like that
a lot of skaters actually make the griptape with a pattern not just the normal way, i see a lot of people do it
@@carlygreenhill566 yeah hasn't anyone played Tony hawk pro skater 3? Plenty of unlockable grip tape patterns
very good
Did anyone else feel kinda wired when he took the bearings out with a screw driver like that instead of the truck hanger.
And putting them back in..use the trucks not a tool
So true
Yes
I do that when I have one lmao
The truck hanger??
When he put the bearings on backwards😍🥰🥰🥰🥰
That hurt
Do you even skate
asapgodz1 yeet do you even sarcasm
Brisco Smith lol
that’s what i said
Him spraying WD-40 on the bearings me 😑
Same 😑
Facts i was like bruh them shits shot
and he fucking disassembles them, just throw it in some acetone or even vinegar, that'll take care of them
Same dude. Good god.
This must be fake tho, no sign of razor tail, no chips, no deep scratches from the slide marks. But the wd 40 triggerd me the most lol
The bearings and the griptape really broke my heart.
What about the wheels?
Annoyed skateboarders have entered the chat*
Haha
From a skaters point of view this is the most painful and unsatisfying thing to watch.. I mean he sanded the wheels, he cut the grip tape before sanding it, he actually cleaned the bearings and bushings instead of replacing them like any other person because either way those will never work properly ever again.
Edit: this is my most liked comment thx
Worst part for me was spray painting the trucks
Who sands wheels
Instead of saying shit about the video, try to look the before and after and see the difference between both. You north americans are so boring, try to be less "ugh" please.
Ps: his job was amazing.
@brendon hayes thats not the point man, all the english comments are saying bad things and not supporting this amazing sk8 channel, instead of the portuguese ones. Sorry if this is your point, but its not cool seeing him, a brazilliam channel, trying to get the international public and all of them saying negative things about his videos...
o comentário em português que você buscava 😳
😊😊😊😊
👍🏼
obrigado
Si y el mío en español xd
Yes
Esse cara é muito bom, acabei de ver o canal dele, primeiro vídeo foi esse, muito bom, e muito satisfatório os barulho, do krl, parabéns. E ainda é brasileiro, que orgulho
I can just imagine the dull thud of that deck's pop
Istead of pop! It’s a thunk¡
I have got to see someone try to skate this damn thing.
Derek Wheeler it would snap instantly because who knows how weak the wood is and it looks damp and old
Boggyz You missed the joke..
@@nicklasnuez4059 I don't get it?
@@nicklasnuez4059 there was no joke
@@Maxboniface it wouldnt snap instanlty lol
Esse é o comentario brasileiro q vc ta procurando
Acertou
Kkkkkkkk
Achei kkkk
finalmente
Kkk
I'm not sure if it's just me but I feel like an aspect of the old board should have been kept. It's an incredible transformation and it's awesome that so many parts were kept but I feel like the soul of the board was lost. Again, incredible transformation. The before and after look like completely different boards.
skateable or not, this is impressive...
I mean, why wouldn't it be skateable?
it's an uncracked deck
with brand new bearings
brand new grip tape
ok trucks
and essentially "worn out wheels"
im confused.
@@truefoxtrot2884 Fr why is he getting so much hate for it
How is it impressive?
@@truefoxtrot2884 Exactly plus wheels get flat spots over time so sanding them like that actually restores some of the proper wheel shape.
@@truefoxtrot2884 waterlogged
*Step one:* restore old skateboard.
*Step two:* buy new one and hang the restored one onto the wall.
Step one throw unrestored board in the dumpster
Step two buy a new board
@@daidoexposure because the board he restored is gonna snap the second you true to land anything
@@daidoexposure yeah the board is gonna just snap in half
@@oufro lmao putting the board on the wall would not snap it. Just cause it’s not in great condition doesn’t mean it’s bad
@@camcyc494 yeah putting it on the wall won’t but if you plan on using that board it’s gonna snap
Here is the English comment u were looking for
Thx dude!
Brian Breen this is basically the first time I “self promoted” my self
@@mattrzz it's a brazilian channel :v
Seriously.. no one would restore bearings
Muito obrigada estava precisando mesmo 🤡
Very good, i like a restorations of skateboarding
Naipe demais! Seloko mor trampo shauhsuahsuha!
Vc por aq?! Hahaha
Leandro Barsoti sou seu fã
Vcs são foda dms, mitossss
iuashuasuahuahduahduaduauhadu
I've skated my whole life and trust me that wood is gone homie.
Daniel Benitez If you look at the bird in the beginning of the video, you can tell it was very damaged. Just making it look new does not mean it won’t snap almost instantly. That’s why skaters replace their boards every 6 months/1 year because the wood gets weak.
@@misterj9619 Not to mention at the beginning of the video It looks like this board has been waterlogged many times over. Like it sat outside under a deck or something and dried. Causing the pores of the wood to open and lose repeatedly losing their structural rigidity.
@@misterj9619 when its that messed up you get no pop
@@misterj9619 weather.. can't tell me that board has not been outside in the rain. It's waterlogged.
@moon disaster 🤦♂️
rodolfao agora é canal gringo de restorarion, daqui a pouco tem 4m de views kjkjkjjj
edit: 5.7m views, falei isso zuando quando esse vídeo saiu, wtf?
The best restorer that i have seen in the world
This isnt restoring, this is remodeling, besides the board was fine to begin with, just needed new bearings and grip
I mean, it has mad razortail
Yep
How was it fine to begin with? Wth r u talking about? It had rust and gunk all over the place, I see nothing wrong with cleaning and maintaining it. Do you ever go out with dirty stinky clothes? I mean, sure a board isn't the same thing and it doesn't need to always be clean but never ever cleaning it says something about you as a person.
Bro your bearings are locked up like that because of the dw40😂 it attracts dirt
IKR 😂😂
Wd40 is water based I'll never..
......NEVER!!!!!!!!!! use it on my bearings EVER AGAIN it'll just melt right off the wheels 😓🤭🤬. just use Crisco or any dollar store cooking oil to soak bearings 🤭🤭
Buy gun oil or bearing oils
@@davyjones2994 i was thinking the same thing. Guy shouldve used BreakFree CLP
I've melted butter over my bearings and it worked pretty well lol
Tip: WD-40 will attract moisture resulting in rust. Edit: Read Henry’s reply below me. If you use it you should use lube afterwards.
Incorrect it displaces it. Eg the name. Water displacement 40. The proper thing to do is use WD 40 to remove moisture dirt and corrosion then pack the bearing with a suitable PTFE lube or grease.
Bearings are toast, no surprise there. The bushings, hardware and axels are where you got lucky. Usually need to be rethreaded. No pressure cracks in the wood show the previous owner really wasn't that active on the board. It's practically brand new deck.
Every part of this was just so wrong lmfao😂
Bro he threw sand on it. People buy this crap smh
@@andreas.619 ikr all these restore videos of shoes and skateboards are literally thrown in mud
It's abandoned. It doesn't mean it's old what the hell.
He didn’t need to sand the wheels first of all
How I feel taking my pen apart in class
me cleaning my skateboard after riding through one puddle
True lol
True story
Bruh
I never clean my skateboard, took effort to make it look this awful!
😂😂😂
Cara incrível esse vídeo! Tô participando de um projeto que recebe peças de skate usadas pra montar skates pra um projeto social de aulas de skate e isso vai me ajudar a restaurar as peças usadas que a gente recebe, muito legal!
Mano ficou lindo demais, maravilhoso 😍👏🏾
10:31 when your dog is out of breath
jorge ruiz so underrated
Yooooo diss will blow up I see it
Love how people are missing the point. He wasn’t fixing the board up to use but just to restore it as a project, I love how you used as much as the original stuff as possible great job mate
He didn’t need to do anything besides swap out bearings maybe grip tape that’s it
This video made me want to work at a skate shop. Now I just need one to open nearby
This mans Wd40 on the bearings radiates the energy of “if duck tape can’t fix it, nothing can”.
I would’ve bought another one must’ve been water logged
BRCDE V1 lol tbh I thought he was gonna power wash it☠️ I was about to cry😂
WD-40 Is not good for the bearings but ok
Or
Bushings
Oscar P. Bruh stfu🤣 just coz he’s not a SkAtEr like u
Actually it doesn’t hurt them either, it’s a lubricant. It’s meant to keep things turning, so stfu and learn more
PrLx Geo except it isn’t, actually. in actuality WD40 is a solvent or rust dissolver, the lubrication is a byproduct of its components, the same components that will attract dirt and seize your bearings the minute you start skating
PrLx Geo how about YOU learn your shit ik mine.
that grip job is mad
I feel Like he's doing surgery on a skate board
Me ‘the deck actually looks cool’
Him ‘no, plain deck’
When my mom says we got a skateboard at home 💀
Me after finding an old Walmart board but really wanting to skateboard: this video
Me a month later asking for a new one so I can practice off grass: this comment
Me 6 months later still waiting to get a new board: 👁👄👁
@@bigjoewenis1501 what the fuck are u talking about
@@sharpensaturation7156 I found a walmart board that my mom got for my brother a few years ago, so I brought it inside to clean it and make it slightly rideable. (hint it didnt work) So then I asked my mom for one and she basically said that we have one at home, but now shes going to get me one
Fuckin nailed it! 😂
update: wheel bite sucks, and pebbles deserve to burn in hell
5 days of work. Wasn't the board abandoned for a reason, tho?
As soon as this man pulled out the WD-40, I already knew has was working a bit out of his knowledge zone 😭
@@daidoexposure specifically for the bearings, you don’t wanna use WD-40 because the solution doesn’t properly lubricate the bearings. You wanna use a silicone-based lubricant so that it doesn’t dry out
i’ve been using WD-40 for mine and they work the same?
@@luisalas24 WD40 makes your bearings rust... it evaporates, leaving all the dirt clumped up in your bearings. the dirt scratches out the tracks the balls run in, which causes more friction, which causes heat and slower bearings altogether until they freeze
I used WD40 for my first skateboard I ever had and the board stopped rolling
Ik the dw40 made me fell like this 😭
first mistake (DO NOT WD40 BEARINGS) the ball bearings will sease up and it will be deemed unrideable
Ciodlgdkgkdkg😎
Frñtñdñfgpñy
Thats how you can tell this guy has no fucking idea what he's doing.
Ya this is either fake or the person riding it NEVER did manuals or wasnt scared to ollie a 10 stair like look at the tail I mean there should be a little razor tail if it's that old right
@@sam.setzer4936 old doesn't mean used/worn. It's actually restoration of ABANDONED skateboard, which means different to all of those. Look it up! A board could be brand new and abandoned. This board was DIRTY and ABANDONED. That does not mean it will have wear LOL.
I feel the pain of you removing the graphic of the deck
and he could have use acetone for an easy and clean job…
if they removed it because they were gonna make their own design that would've been different, but just leaving it plain hurt to see 😔
@@docunagi wouldn't that mess with the glue that is holding all the layers of the wood?
him scraping off the graphic killed a part of me inside
It killed my everything
Que vídeo bom! Como eu não tinha visto isso ainda? Que saudade de mexer/montar um skate... grandes recordações... 2015/2016...
That board was barely used lmao, it was burried and dug out to make it look old
Facts the wheels trucks and bearings should be broken if its old
I thought I was the only one who noticed that
When I was a small child, I had a skateboard that got left outside. It didn't hold up because I didn't understand how to take care of it. I also didn't really skate it, so it didn't have razor tail either.
Yep. And then he did all that work to make a board that's completely useless.
Grip tape doesn’t come off that easy unless it was setup a few days before. If this board was actually old he’d need a heat gun to melt the glue and it wouldn’t be coming off like a bandaid like he’s doing at 7:30 . I’ve taken grip off old snapped decks it’s not an easy task
Sure, looks beautiful but doesn’t seem too skateble to me
You haven't seen my board yet
Skateble
I meen it's a wooden skateboard once something is fucked up on the wood it's done forever so idk what you expected mabey you could do better?
@@faithwheeler4724 maybe
@@swicksswicks8242 🤣🤣
Great work, ignore the haters. The board is not ruined and perfectly skatable, only noobs bellieve its not, you don't need the newest, best skateboard. Have you seen what Rodney Mullen skated in the 80's and he still did sick tricks and even invented tricks on shitty boards.
Dude, the background music makes me feel like I´m in a GTA V mission.
I like how at the end the bearings are still shot haha
esse é aquele tipo de vídeo satisfatório de se ver.
Slk só tem americano aqui
Realmente
Every skater looking at you sand the wheels: “Look at this idiot🤣🤣”
Facts
HAHAHAH FACTS
🤣
I'm not even a skater and I know damn well you shouldn't sand the wheels lmao
Its fine but you better buy a knew one
Caralho man, ficou foda. Faz um desse por mês, muito show.
Por mês? Ele deve ter levado um mês pra fzr esse huehuehue
@@asura1121 se ele começar a fazer garanto q vai ter MTA pessoa pagando pra ele fazer esse tipo de restauração mn
Se ele achar 1 skate abandonado por mês crlh kkkkkk
@@leonardofelix1994 man, ele tem mais skate na casa dele do que eu tenho tempo de vida kkkkkkkkkkkkkkkk
@@asura1121 da sim man. Só na R2 ele pega shape de sobra, lá os moleques são playboy kkkkkkkkkkkkkkkk
O canal ta voltando com tudo. Continue assim, Rod, fazendo vídeos pros gringos.
Nossa, que satisfatório ver algo sendo restaurado! Aí que maravilha!
Eu depois de ver esse vídeo:
- acho que eu vou no lixão
Kkkk
Ksksksk
Kkk
Eu tabem kkkkkkkkkk kkkkkkkkkk kkkkkkkkkk kkkkkkkkkk kkkkkkkkkk kkkkkkkkkk
sei q é meme, porém se for fazer isso msm, compra um novo msm, esse shape aí, msm parecendo novo no final, já era
The pain in my bones when he used WD40 but other than that great job it looks great 👍
Idk how this vid reached me but it it’s amazing!! Congrats on the hard work
Esse vídeo merece 5000000000 bilhões de like
When he Sanded the wheels 💀, i mean it's clean tho....
Lmao fr some ppl don't know cuz they don't skate
@@glo0292 amen bro
@@glo0292 le guy is a skater
Well flat spots are gone..... hopefully 😅
@@Darkalms any skater would know slicing off 1-2 mm on each wheel individually for the cleanliness would make them unbalanced with one another since it won't be perfect
I died inside when I watched how he put the grip tape on
Sameee
Why???
@@renanmonteiro5845 cause thats not how you do it
@@antonysafradin explain me the certain way
@@renanmonteiro5845 you take the griptape, put it on the deck, (be careful to not create air bubbles under the griptape) stick the griptape in the deck then take a screw driver or any metal piece an slide all around the deck so the griptape takes the shape of the deck, then cut it, and in the end smooth it out with the griptape you just cut.
Cara que trabalheira! Parabéns pela paciência pra criar esse conteúdo!!
12:26 é a musica que toca no final dos vídeos do saiko
rod deixou esse skate enterrado por um mês pra gravar esse vídeo
Isso se chama MARRETAR com um skt :)
@@uLzzzzz fez até trilha com ele kkk
O skate era abandonado
@@pedrinhoart5820 queria um skate abandonado desse
@@pedrinhoart5820 quem que ia abandonar um rolamento redbones, trcuk crail, roda spitfire e um shape provavelmente de maple no brasil?
10:35 kinda sounds like the Pixar lamp jumping on the "i"
It doesssss
jajajajaja si
Primeiro DIY do Rod e os gringo fica cheio de frescura pqp
Tinha parado de assistir o Rod a muito tempo atrás, RUclips me recomendou esse vídeo e assisti pensando que era gringo kkkkk. A qualidade melhorou demais seloko.
La rodamientos tienen que estar tapados y los tracks tienen que tener la goma antes de la tabla, pero lo demás está perfecto, buen trabajo bro !